Dear Colleagues!

The issue (No. 4, 2024) of the Mining Science and Technology (Russia) journal has been published on our website.

🔥Hurry to read!🔥

In the new issue:

📌 Al-Dujaili A.N. New advances in drilling operations in sandstone, shale, and carbonate formations: a case study of five giant fields in the Mesopotamia Basin, Iraq. Mining Science and Technology (Russia). 2024;9(4):308-327. https://doi.org/10.17073/2500-0632-2023-08-146
📌 Bagdasarau M.A., Mayevskaya A.N., Petrov D.O., Sheshko N.N. GIS modeling of a Cenozoic strata structure in Brest region for forecasting and evaluation of non-metallic deposits. Mining Science and Technology (Russia). 2024;9(4):328-340. https://doi.org/10.17073/2500-0632-2024-03-230
📌 Deryaev A.R. Directional drilling of an exploratory well in the shallow waters of the Caspian Sea. Mining Science and Technology (Russia). 2024;9(4):341-351. https://doi.org/10.17073/2500-0632-2024-02-217
📌 Boyarko G.Yu., Lapteva A.M., Bolsunovskaya L.M. Mineral resource base of Russia’s copper: current state and development prospects. Mining Science and Technology (Russia). 2024;9(4):352-386. https://doi.org/10.17073/2500-0632-2024-05-248
📌 Kalashnik A.I. Effect of water inflows on the strength characteristics of the Lovozero rare-metal deposit rocks. Mining Science and Technology (Russia). 2024;9(4):387-394. https://doi.org/10.17073/2500-0632-2023-09-160
📌 Korol E.A., Degaev E.N., Konyukhov D.S. Assessing dust concentration at the workplace of a crushing and screening plant operator for special labor conditions evaluation. Mining Science and Technology (Russia). 2024;9(4):395-405. https://doi.org/10.17073/2500-0632-2024-03-235
📌 Mitrakova N.V., Khayrulina E.A., Perevoshchikova A.A., Poroshina N.V., Malyshkina E.E., Yakovleva E.S., Kobelev N.A. Chemical and ecological properties of soils and the NDVI analysis on reclaimed sulfide coal waste dumps in the boreal zone. Mining Science and Technology (Russia). 2024;9(4):406-419. https://doi.org/10.17073/2500-0632-2024-04-206
📌 Borisenko V.F., Sidorov V.A., Sushko A.E., Rybakov V.N. Vibration metrics for informational support in assessing the technical condition of ball mills. Mining Science and Technology (Russia). 2024;9(4):420-432. https://doi.org/10.17073/2500-0632-2023-10-175

Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈

#inenglish #MST #issue #hydrocarbons #field #reserves #basin #formation #extraction #drilling #well #productivity #solution #accident #reservoir #bit #control #Iraq #geology #Cenozoic #forecast #GIS #ArcGIS #evaluation #Brest #energy #efficiency #exploration #well #CaspianSea #copper #ore #deposit #mining #Russia #mine #rock #hazard #Lovozero #Karnasurt #production, #crushedstone, #dust, #concentration #emissions #harm #protection #coal #dump #waste #reclamation #lithostrat #soil #NDVI #embryonic #mill #electricdrive #electricengine #shaft #bearing #operation #damage #failures #control #diagnostics #vibration #signal #frequency #analysis #correlation

We present the articles of the fourth issue of scientific journal "Mining Science and Technology” (Russia) for 2024:

This study presents the first analysis of the key interrelated technical characteristics of industrial ball mills, including drum volume, diameter, rotational speed, ball load, total weight, and drive power, enabling a more substantiated approach to selecting technical parameters and operational modes. The installation of a permanent vibration control system on ball mills used for grinding mineral raw materials required the individual determination of technical condition category thresholds for the motor, gear-shaft, and drum. The category thresholds were determined individually for each shaft using statistical classification, under the assumption that coupled components are in a state influenced by the energy potential of damage during staged progression. Standard 'reference' ratios of vibration values across three mutually perpendicular directions were established. Characteristic patterns and sequences of damage progression were identified based on the direct spectra of vibration velocity and acceleration. During the analysis of vibration signal time series, a beat frequency mode was detected, indicating potential damage development within gear elements. Effective informational support for the operational condition of ball mills is achieved through the analysis of overall vibration levels, direct trends in vibration velocity and acceleration, time series of the vibration signal, and both long-term and short-term trend analyses. Vibration velocity trends provide insights into technical condition by assessing operational stability, startup frequency, and maintenance intervals.

For more information, see the article:

📌 Borisenko V.F., Sidorov V.A., Sushko A.E., Rybakov V.N. Vibration metrics for informational support in assessing the technical condition of ball mills. Mining Science and Technology (Russia). 2024;9(4):420-432. https://doi.org/10.17073/2500-0632-2023-10-175

Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈

#InEnglish #MST #BallMill #ElectricDrive #ElectricEngine #GearUnit #Design #Shaft #Bearing #Operation #OperationalCapacity #Damage #Failures #Control #Diagnostics #Vibration #Signal #VibrationAnalyzer #VibrationVelocity #VibrationAcceleration #Frequency #Amplitude #Harmonic #Spectrum #Analysis #Correlation #Forecasting #TrendAnalysis

We present the articles of the first issue of scientific journal "Mining Science and Technology” (Russia) for 2025:

Scientists conducting research at the mines of the VVerkhnekamsk potassium-magnesium salt deposit (VPMSD) discovered an interesting pattern: gas-air surveys show that the volume of gaseous impurities in the main ventilation drifts is often significantly lower than in the working areas of dead-end workings. This phenomenon of decreasing gas concentrations along the ventilation airflow path is explained not only by the dilution of impurities due to fresh air leaks but also by the chemical neutralization of gases through interaction with the potash rock mass. Previously conducted laboratory studies confirmed the ability of sylvinite (NaCl + KCl) to absorb toxic and combustible gases. This paper presents the results of field studies at one of the VPMSD mines, where the dynamics of gas impurities in the workings were studied, taking into account both chemical processes and ventilation factors. Specialists measured the concentration of combustible and toxic gases in seams of different mineral compositions and analyzed the influence of potash salt properties on the gas composition in long dead-end workings. Laboratory analysis of the collected air samples, performed by chromatographic method using the "CHROMOS GH-1000" instrument, made it possible to quantitatively assess the contribution of gas neutralization and dilution processes to the reduction of harmful impurity concentrations. The results showed that in long dead-end workings of seam AB (100 m or more), the content of gaseous impurities consistently decreases as the distance from the dead end to the mouth of the working increases. The study also examined other factors influencing changes in the gas composition in mine workings.

For more information, see the article:

📌 Starikov A.N., Maltsev S.V., Sukhanov A.E. Influence of the sorption properties of potash salts on the gas environment in dead-end mine workings. Mining Science and Technology (Russia). 2025;10(1):25-33. https://doi.org/10.17073/2500-0632-2024-01-210

Subscribe to our Telegram channel:
👉 t.iss.one/MinSciTech 👈

#InEnglish #MST #mine #gas #sorption #leaks #sylvinite #methane #CO #CO2 #H2S #ventilation #shaft #safety #chemistry #science #mining #analysis #experiment #laboratory #air #seam #measurement #point #length #path #jet #face #mouth #volume #harm #risk #standard #method #device #data #result #experience #salt #KCl #NaCl #zone #deadend #tube #speed #pressure #balance #neutralization