We present the articles of the third issue of scientific journal "Mining Science and Technology” (Russia) for 2024:

A systematic approach to evaluating environmental safety in metro operations, based on modelling the development of defects in tunnel structures under the influence of hydrogeological factors, will help organize existing information on potential accidents and develop monitoring methods and measures to minimize risks that compromise the environmental sustainability of underground transport infrastructure.

For more information, see the article:

📌 Zhukov S.A. Substantiation of environmental safety in metro facility operations considering hydrogeological risks. Mining Science and Technology (Russia). 2024;9(3):283-291. https://doi.org/10.17073/2500-0632-2024-04-259

Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈

#inenglish #MST #metro #underground #subway #ecology #safety #innovation #risks #geology #transport #hydrogeology #sustainability #accident #monitoring #tunnel #technology #construction #emission #energy #efficiency #concrete #defects #extraction #quicksand #aquifer #borehole #lining #deformation #leaching #tubbing #modeling #geomechanics #waterproofing #disposal #waste

How to estimate the modulus of deformation of a block rock masses using discrete element simulations?

The deformation modulus of rock mass is a fundamental parameter in the geomechanics of tunnels, mining, and other geotechnical rock-supported facilities. The mechanical properties of a rock mass, seen as a fractured medium, are determined by the intact rock, the pattern of relative joint-sets, the geometrical arrangement of the joints, and their mechanical properties. Joint sets, acting as planar discontinuities, confer scale and direction-dependent mechanical properties. The critical factor influencing the deformational behavior of a rock mass is the stiffness of its fractures and discontinuities. The present study investigates the anisotropic deformation modulus of blocky rock masses formed by three intersecting joint sets, including two orthogonal sets. This was achieved through discrete element simulations of representative volumes of blocky rock masses. These studies facilitate the estimation of the blocky rock mass deformation modulus in different directions without the need for laboratory and in-situ tests or empirical relationships.

For more information, see the article:

📌 Ahrami O., Javaheri Koupaei H., Ahangari K. Determination of deformation modulus and characterization of anisotropic behavior of blocky rock masses. Mining Science and Technology (Russia). 2024;9(2):116-133. https://doi.org/10.17073/2500-0632-2023-08-143

Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈

#inenglish #MST #anisotropy #deformation #modulus #mass #rocks #loading #fracture #stiffness #strength #shear #resistance #stress #displacement #sliding #quartz #modeling #coefficient #index #blocks #deformations #material #surface #structure #boundary #experiment #geomechanics #JRC #UCS #GSI #simulation

How to determine the deformation modulus and anisotropy in blocky rock masses?

🔹 In a study published in Mining Science and Technology (Russia), the authors investigated the anisotropic behavior of blocky rock masses. They employed the discrete element method to model and analyze the deformation modulus as a function of loading direction, joint properties, and intact rock characteristics.

🔹 Key Findings:
✔️ The deformation modulus depends on the Joint Roughness Coefficient (JRC) and the Uniaxial Compressive Strength (UCS) of the intact rock.
✔️ The influence of joint roughness on the deformation modulus is three times greater than that of intact rock strength.
✔️ The degree of anisotropy in the deformation modulus ranged from 1.6 ≤ Rₑ ≤ 2.5, with an average value of 1.88.
✔️ During joint sliding failure, the yield strain (0.2–0.4) is independent of the loading angle (θ) and the orientation of the third joint set (α).

🔹 Practical Applications:
The results enable the prediction of rock mass behavior without costly field tests, which is crucial for designing tunnels, boreholes, and other geotechnical structures.

Read the full study in Mining Science and Technology (Russia):

📌 Ahrami O., Javaheri Koupaei H., Ahangari K. Determination of deformation modulus and characterization of anisotropic behavior of blocky rock masses. Mining Science and Technology (Russia). 2024;9(2):116–133. https://doi.org/10.17073/2500-0632-2023-08-143

🔔 Subscribe to our Telegram channel: t.iss.one/MinSciTech

#InEnglish #MST #anisotropy #deformation #modulus #mass #rocks #loading #fracture #stiffness #strength #shear #resistance #stress #displacement #sliding #quartz #modeling #coefficient #index #blocks #deformations #material #surface #structure #boundary #experiment #geomechanics #JRC #UCS #GSI #simulation