🔥 OnePlus 13 GKI Kernel by @ehsan149

✨ Fully compatible with OnePlus 13

• Tested on: OnePlus 13 (PJZ110)
• Recommended: SukiSU Ultra Manager v12977 or above

⚠️ Important Notes

• Backup your boot image before flashing!
• Flashing involves risks — proceed at your own risk!

Original Message: Here

🔧 Changelog – June 02, 2025

◉ Based on OnePlus source kernel
◉ Built on Android 15 kernel base 6.6.30
◉ Synced with upstream SukiSU Ultra (12977)
◉ Optimized build for OnePlus 13 (AK3 flashable ZIP)
◉ Removed KPM patch (SukiSU)
• Removed due to dependency on APatch infrastructure
• Ensures stability without APatch-based HAL
◉ Removed LZ4KD patch, using LZ4 instead
◉ Integrated latest SUSFS patch for SukiSU
SUSFS v1.5.7 [For advanced SUSFS management, consider installing the [SUSFS Magisk/KernelSU Module].
◉Manual Syscall Hooks for improved hiding capabilities.
◉The FengChi driver was re-added to prevent increased power consumption caused by the abnormal behavior of big cores.
◉ Added HMBird GKI Patch (FengChi) for GKI compatibility
◉ Enabled Unlimited Hotspot Support
◉ Forced ECN (Explicit Congestion Notification) for better network performance
◉ Google BBR set as default TCP congestion control with FQ as default qdisc for improved network throughput and latency Use this module [TCP Optimiser]
◉ TMPFS XATTR and POSIX ACL support for enhanced file system features
◉ Optimized for Magic Mount usage
◉ Hide Stuff patches applied
◉ LZ4 compression for ZRAM and Hibernation
◉ ZRAM enabled with standard LZ4
◉For users who want LZ4KD support for ZRAM
Use this module [6.6_ZRAM_Lz4kd_16G.zip]
◉ Hibernation enabled with LZ4 compression for potentially faster resume times.
◉ TCP Pacing tweaks for smoother data transmission
◉ RCU Tracing disabled for reduced overhead
◉ Wireguard support

✨ SukiSU Ultra Manager:
• Optimizing Home Performance
• Better handle webui engine select
• Refactoring kernel flash features and styles
• Make action execution screen have the same behavior as Magisk
• Updated colors and styles
• Convert bitmap image to vector by hand. Document: add copyright information. (#121)


🛠 Installation Methods

Option A: Horizon Kernel Flasher
1. Open app → Select "Flash Kernel"
2. Choose SuKiSU_GKI_12977_OP13_LZ4_BBR_ECN_FengChi_ehsan149.zip
3. Flash and reboot

Option B: SukiSU Ultra App – GKI Installer
1. Go to "LKM" tab → Tap "GKI Installation"
2. Choose your ZIP → Install

Option C: Patch and Flash init_boot (If device is stock/unrooted)

If your phone is still using stock boot image (no root), you must patch and flash init_boot first:

◦ Download full OTA package for your ROM
◦ Extract init_boot.img from the OTA (use otaripper or Payload Dumper or similar)
◦ Open SukiSU ultra app, patch init_boot.img
◦ Reboot phone into fastboot mode
◦ On PC, flash patched init_boot:

fastboot flash init_boot <patched_file>.img

fastboot reboot

Once rebooted, you can install the GKI kernel ZIP by one of the methods above.

Join for Updates: @OnePlus13Series
Please boost - Tap Here

Oneplus 13 Oos15.2
OxygenOS IN 15.0.0.831

Full OTA: Download
Boot & Init_boot: HERE
Super Flasher: Download
Patched DTBO for CN: HERE
Regional Flasher: Download

Join for Updates: @OnePlus13Series
Please boost - Tap Here

TWRP OnePlus 13 V1.0.1 by @color597

Notes:

1. This version only supports data decryption if no screen lock password has ever been set.
• If a password has been set before, you’ll need to format the data partition to enable decryption.
• If you set a password again after formatting, the same applies.
• If you wish to avoid formatting data, place the ROM zip in /data/media before flashing, or use ADB sideload to install it.

2. includes three versions of the Magisk :
• Kitsune
• Kitsune COUI Edition
• Magisk
/customzip/Magisk

Changelog

1. Added device recognition for the US model of OnePlus 13 (CPH2655).
Other international variants might also show up as the US version.

2. Updated the Kitsune Mask COUI Edition .

Working:

• MTP
• Fastbootd
• Vibration adjustment

Not Working:

1. Flashing official ColorOS firmware (except downgrade packages or those containing my_company and my_preload partitions)
2. Data decryption fails if screen lock password has been set
3. OTG

Join for Updates: @OnePlus13Series

🔥 OnePlus 13 GKI Kernel by @ehsan149

✨ Fully compatible with OnePlus 13

• Tested on: ColorOS 15 (830) & OxygenOS 15 (831)
• Recommended: SukiSU Ultra Manager v13025 or above
• Built on Android 15 source, kernel version 6.6.30
• Based on OnePlus source kernel

⚠️ Important Notes

• Backup your boot image before flashing!
• Flashing involves risks — you proceed at your own risk.

🔧 Changelog – June 14, 2025
◉[Fixed] Perfect FengChi : Resolved the "empty shell driver" issue. /proc/hmbird_sched/hmbird_stats is now correctly populated, and the driver is fully functional for FengChi in games.

🧩 Want to check if your game supports FengChi on your device?
Use this simple web tool 👉 [FengChi Support Checker]
Just enter your device code + game package name(s) to find out instantly.

• OnePlus 13 – 23821
• OnePlus Ace 5 Pro – 24811
• OnePlus 13T – 24821
• OnePlus Ace 5 Racing Edition – 24825
• OnePlus Ace 5 Ultimate Edition – 24813
• OnePlus Ace 5 – 23851

◉[Updated] SukiSU & Patches: Synced with the latest SukiSU Ultra (v13025) and updated the kernel patcher to v0.12.0 for the latest features and security enhancements.

Changelog – June 12, 2025
• Networking:
◉ Google BBR + FQ qdisc set as default for improved network throughput and lower latency Use this module [TCP Optimiser]
◉ECN (Explicit Congestion Notification) is enabled for better network performance.
◉TCP Pacing tweaks applied for smoother data transmission.
◉ Unlimited Hotspot functionality is enabled.
◉ Wireguard support

Performance & System:
◉ Latest SUSFS (v1.5.7) and Manual Syscall Hooks integrated for improved root hiding.[For advanced SUSFS management, consider installing the [SUSFS Magisk/KernelSU Module].
◉HMBird GKI Patch included to ensure full compatibility of custom drivers.
◉ LZ4 compression enabled for Hibernation.
◉TMPFS XATTR and POSIX ACL support.
◉RCU Tracing is disabled to reduce CPU overhead.

🎛 Optional Build-time Features:
◉The FengChi driver was re-added to prevent increased power consumption caused by the abnormal behavior of big cores.
◉Added HMBird GKI Patch (FengChi) for GKI compatibility
◉eSIM Support : Enabled by default for Global/EU/IN ROMs.
◉ Removed KPM patch (SukiSU)
• Removed due to dependency on APatch infrastructure
• Ensures stability without APatch-based HAL
◉ Removed LZ4KD patch, using LZ4 instead
◉ Hibernation enabled with LZ4 compression for potentially faster resume times.
◉For users who want LZ4KD support for ZRAM
Use this module [6.6_ZRAM_Lz4kd_16G.zip]
◉ Optimized for Magic Mount usage
◉ Hide Stuff patches applied


🛠 Installation Methods

Option A: Horizon Kernel Flasher
1. Open app → Select "Flash Kernel"
2. Choose SuKiSu_GKI_13025_oneplus_13_FengChi_LZ4_eSIM_BBR_ECN_ehsan149
3. Flash and reboot

Option B: SukiSU Ultra App – GKI Installer
1. Go to "LKM" tab → Tap "GKI Installation"
2. Choose your ZIP → Install

Option C: Patch and Flash init_boot (If device is stock/unrooted)

If your phone is still using stock boot image (no root), you must patch and flash init_boot first:

◦ Download full OTA package for your ROM
◦ Extract init_boot.img from the OTA (use otaripper or Payload Dumper or similar)
◦ Open SukiSU ultra app, patch init_boot.img
◦ Reboot phone into fastboot mode
◦ On PC, flash patched init_boot:

fastboot flash init_boot <patched_file>.img

fastboot reboot

Join @OnePlus13Series
Src: Here

Stable ColorOS 15.0.0.831For OnePlus 13 - PJZ110_15.0.0.831(CN01)

🔸Download: server 1

Changelog

System

◆ Optimized fingerprint display

◆ Improved system stability

◆Fixed an issue where in some scenarios, after swiping up with three fingers, the One-Touch Flash Memo function would not work with a low probability

◆ Fixed an issue where after activating One-Touch Flash Memo by swiping up with three fingers, the AI ​​reference in LittleBu Memo would not be generated with a low probability

◆ Fixed an issue where the system update would fail with a low probability

Updates: @OnePlus13Series
Chat: @OnePlus13SeriesChatRoom
Photography: @Oneplus13Photography
Please Boost: Here

Hi all,

I wanted to share that I’ve sold my device due to financial reasons, and as a result, I will no longer be able to continue support for Nameless/SunOS.

I sincerely thank each one of you who participated in the test builds, reported bugs, and contributed towards making the source more stable. Your support and feedback have been truly appreciated.

The good news is that Lineage is actively working on it, so there’s a possibility of official support from LOS in the future.

Thank you once again for everything.

A crowdfunding campaign has been started for Chandu (known for his NamelessOS builds for the Oneplus 13).

For context:

Chandu, as a member of both LineageOS and SunOS projects, has made significant contribution to the custom rom development scene of the Oneplus 12.
And he has so far been doing the same for the Oneplus 13.

Also worth noting, his work greatly benefited the Oneplus 13R development as well, thanks to his work on the Oneplus 12.
So the same logic applies for potential Oneplus 13S/T owners (since they share the chipset with the 13).

Some of his work:
https://github.com/OnePlus-12-Development
https://github.com/SunOS-Project (new NamelessOS)
https://review.lineageos.org/q/owner:[email protected]

Some of the work he indirectly helped realize:
https://github.com/oplus-giulia-dev

But he recently had to sell his Oneplus 13 due to personal financial difficulty.

So we have started a crowdfunding campaign to help him buy it once more.

A brand new unit is 70,000 INR (price on official Oneplus India site), which translates to approximately $806.
However, if Chandu manages to find a used unit in a good state for less, he'll get it it.

This way he will still be able to contribute to both LineageOS and SunOS development for the Oneplus 13.

Whoever wants to chip in, please join this group

Thank you so much, everyone!
We've reached the target for the OnePlus 13 with ₹57,741 (~$670) contributed.
I truly appreciate the support from this amazing community.

Once I get the device, I’ll start work right away and keep you all updated.
Those who contributed will receive early builds from my side as a token of thanks!

New Satellite feature they call BeaconLink

OOS16 first build

COS16 16.0.0.1

📱 SunOS-Project - Official | Android 15 | OnePlus 13 (dodge)

🗒 Details:
• Version: #varuna (A15)
• Codename: #dodge
• Released: 09/07/25

🆘 Support: Telegram
📸 Screenshots: Click Here
💵 Donate: Paypal | UPI: dyavanapellichandu@ybl
(If you like our work and want to support development, it helps pay server bills and infrastructure)

🔖 Tags: #ROM #SunOS #Android15 #Official #OnePlus13 #dodge

✨ Source Changelogs:
• Initial A15 Release based on CPH2653_15.0.0.831(EX01) firmware blobs

✅ Working:
• Camera & Flashlight
• WiFi, Bluetooth
• Telephony (Calls & Data)
• IMS (VoLTE, VoWiFi, RCS)
• Audio (Playback & Record)
• Video Playback
• GPS, Sensors
• WiFi Display

❌ Broken:
• eSIM (WIP)

📦 Compatibility:
• All variants supported: EU / IN / CN / NA

📔 Note:
Make sure both slots have the same firmware to avoid critical issues!

🧩 Flash Instructions:
⚠️ Ensure both slots have the same firmware before flashing!

• Download images from here.

fastboot flash init_boot init_boot.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash vendor_boot vendor_boot.img
fastboot -w
fastboot reboot recovery

➡️ In recovery:
• Factory reset (wipe/format data)
• ADB sideload the SunOS zip
• Reboot and enjoy 🌞

📥 Download:
🔗 Sourceforge | Mirror