Как снизить уровень отсева при добыче блочного камня буровзрывным способом?
На многих карьерах по добыче строительного камня присутствует проблема повышенного выхода отсева после всех стадий дробления и измельчения, которая приводит к снижению экономической эффективности горных предприятий. Мелкая фракция образуется вследствие измельчения предразрушенной горной массы. Уменьшение интенсивности и размеров зон предразрушения приведет к решению поставленной проблемы.
Установлено, что наибольшее влияние на форму и длительность взрывного импульса оказывает скорость детонации ВВ. С уменьшением скорости детонации уменьшается и пиковое давление головной части импульса, увеличивается длительность его нарастания, а низкоамплитудный импульс большой длительности способствует более качественному дроблению горной массы с наименьшим эффектом предразрушения.
Применяя ВВ с пониженной скоростью детонации, можно снизить «излишнее» воздействие на массив и тем самым уменьшить интенсивность предразрушения в зоне регулируемого дробления при взрыве. Это объясняется тем, что отдельные куски после взрыва будут в меньшей степени ослаблены и в результате выход отсева при дроблении скальных горных пород на щебень должен быть уменьшен.
Более подробно - в статье журнала "Горные науки и технологии":
📌 Хохлов С.В., Виноградов Ю.И., Маккоев В.А., Абиев З.А. Влияние скорости детонации взрывчатых веществ на степень предразрушения горной породы при взрыве. Горные науки и технологии. 2024;9(2):85-96. https://doi.org/10.17073/2500-0632-2023-11-177
Подписывайтесь на ТГ-канал журнала:
👉 t.iss.one/MinSciTech 👈
#нарусскомязыке #ГНиТ #предразрушение #дробление #щебень #взрыв #микротрещины #трещины #детонация
На многих карьерах по добыче строительного камня присутствует проблема повышенного выхода отсева после всех стадий дробления и измельчения, которая приводит к снижению экономической эффективности горных предприятий. Мелкая фракция образуется вследствие измельчения предразрушенной горной массы. Уменьшение интенсивности и размеров зон предразрушения приведет к решению поставленной проблемы.
Установлено, что наибольшее влияние на форму и длительность взрывного импульса оказывает скорость детонации ВВ. С уменьшением скорости детонации уменьшается и пиковое давление головной части импульса, увеличивается длительность его нарастания, а низкоамплитудный импульс большой длительности способствует более качественному дроблению горной массы с наименьшим эффектом предразрушения.
Применяя ВВ с пониженной скоростью детонации, можно снизить «излишнее» воздействие на массив и тем самым уменьшить интенсивность предразрушения в зоне регулируемого дробления при взрыве. Это объясняется тем, что отдельные куски после взрыва будут в меньшей степени ослаблены и в результате выход отсева при дроблении скальных горных пород на щебень должен быть уменьшен.
Более подробно - в статье журнала "Горные науки и технологии":
📌 Хохлов С.В., Виноградов Ю.И., Маккоев В.А., Абиев З.А. Влияние скорости детонации взрывчатых веществ на степень предразрушения горной породы при взрыве. Горные науки и технологии. 2024;9(2):85-96. https://doi.org/10.17073/2500-0632-2023-11-177
Подписывайтесь на ТГ-канал журнала:
👉 t.iss.one/MinSciTech 👈
#нарусскомязыке #ГНиТ #предразрушение #дробление #щебень #взрыв #микротрещины #трещины #детонация
mst.misis.ru
Effect of explosive detonation velocity on the degree of rock pre-fracturing during blasting | Khokhlov | Mining Science and Technology…
👍4❤2⚡1🔥1🙏1💯1😴1
How to reduce the output of fines rate during block stone extraction by drilling and blasting?
At many quarries for the extraction of building stone there is a problem of increased output of fines after all stages of crushing and grinding, which leads to a decrease in the economic performance of mining enterprises. The fine fraction is formed by the crushing / grinding of prefractured rock mass. Reducing the intensity and size of the prefracture zones will lead to a solution to the problem at hand. It was established that the greatest influence on the shape and duration of the blast pulse is exerted by the velocity of explosive detonation. As the detonation velocity decreases, the peak pressure of the head part of the pulse decreases, and the duration of its rise increases, while a low-amplitude pulse of long duration contributes to better crushing of a rock mass with the least effect of prefracture. Using explosives with a reduced detonation velocity allows reducing the “surplus” impact on a rock mass and thus reducing the intensity of prefracture in the zone of controlled crushing during a blast. This is because the individual pieces will be weakened to a lesser extent after a blast and as a result, the yield of undersize when crushing rock into crushed stone will be reduced.
For more information, see the article:
📌 Khokhlov S.V., Vinogradov Yu.I., Makkoev V.A., Abiyev Z.A. Effect of explosive detonation velocity on the degree of rock pre-fracturing during blasting. Mining Science and Technology (Russia). 2024;9(2):85-96. https://doi.org/10.17073/2500-0632-2023-11-177
Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈
#inenglish #MST #prefracture #crushing #blast #stress #microfracture #fracture #density #detonation #velocity #fines
At many quarries for the extraction of building stone there is a problem of increased output of fines after all stages of crushing and grinding, which leads to a decrease in the economic performance of mining enterprises. The fine fraction is formed by the crushing / grinding of prefractured rock mass. Reducing the intensity and size of the prefracture zones will lead to a solution to the problem at hand. It was established that the greatest influence on the shape and duration of the blast pulse is exerted by the velocity of explosive detonation. As the detonation velocity decreases, the peak pressure of the head part of the pulse decreases, and the duration of its rise increases, while a low-amplitude pulse of long duration contributes to better crushing of a rock mass with the least effect of prefracture. Using explosives with a reduced detonation velocity allows reducing the “surplus” impact on a rock mass and thus reducing the intensity of prefracture in the zone of controlled crushing during a blast. This is because the individual pieces will be weakened to a lesser extent after a blast and as a result, the yield of undersize when crushing rock into crushed stone will be reduced.
For more information, see the article:
📌 Khokhlov S.V., Vinogradov Yu.I., Makkoev V.A., Abiyev Z.A. Effect of explosive detonation velocity on the degree of rock pre-fracturing during blasting. Mining Science and Technology (Russia). 2024;9(2):85-96. https://doi.org/10.17073/2500-0632-2023-11-177
Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈
#inenglish #MST #prefracture #crushing #blast #stress #microfracture #fracture #density #detonation #velocity #fines
mst.misis.ru
Effect of explosive detonation velocity on the degree of rock pre-fracturing during blasting | Khokhlov | Mining Science and Technology…
👍3😴2❤1🔥1👏1🙏1
Statistics of the journal "Mining Science and Technology" by the end of 2024
35 articles were published by 102 authors from the following countries:
🇷🇺 #Russia - 87 authors;
🇧🇾 #Belarus – 4 authors;
🇮🇷 #Iran – 3 authors;
🇻🇳 #Vietnam – 2 authors;
🇹🇿 #Tanzania – 2 authors;
🇹🇷 #Turkey – 2 authors;
🇮🇶 #Iraq – 1 author;
🇹🇲 #Turkmenistan – 1 author.
Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈
#inenglish #MST
35 articles were published by 102 authors from the following countries:
🇷🇺 #Russia - 87 authors;
🇧🇾 #Belarus – 4 authors;
🇮🇷 #Iran – 3 authors;
🇻🇳 #Vietnam – 2 authors;
🇹🇿 #Tanzania – 2 authors;
🇹🇷 #Turkey – 2 authors;
🇮🇶 #Iraq – 1 author;
🇹🇲 #Turkmenistan – 1 author.
Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈
#inenglish #MST
mst.misis.ru
Mining Science and Technology (Russia)
Peer-rewieved journal
👍4❤1⚡1🔥1
Статистика журнала "Горные науки и технологии" по итогам 2024 г.
Было опубликовано 35 статей 102 авторов из следующих стран:
🇷🇺 #Россия – 87 авторов;
🇧🇾 #Беларусь – 4 автора;
🇮🇷 #Иран – 3 автора;
🇻🇳 #Вьетнам – 2 автора;
🇹🇿 #Танзания – 2 автора;
🇹🇷 #Турция – 2 автора;
🇮🇶 #Ирак – 1 автор;
🇹🇲 #Туркменистан – 1 автор.
Подписывайтесь на ТГ-канал журнала:
👉 t.iss.one/MinSciTech 👈
#нарусскомязыке #ГНиТ
Было опубликовано 35 статей 102 авторов из следующих стран:
🇷🇺 #Россия – 87 авторов;
🇧🇾 #Беларусь – 4 автора;
🇮🇷 #Иран – 3 автора;
🇻🇳 #Вьетнам – 2 автора;
🇹🇿 #Танзания – 2 автора;
🇹🇷 #Турция – 2 автора;
🇮🇶 #Ирак – 1 автор;
🇹🇲 #Туркменистан – 1 автор.
Подписывайтесь на ТГ-канал журнала:
👉 t.iss.one/MinSciTech 👈
#нарусскомязыке #ГНиТ
mst.misis.ru
Mining Science and Technology (Russia)
Peer-rewieved journal
👍4⚡1❤1🔥1🙏1
Mining Science and Technology (Russia) pinned «Статистика журнала "Горные науки и технологии" по итогам 2024 г. Было опубликовано 35 статей 102 авторов из следующих стран: 🇷🇺 #Россия – 87 авторов; 🇧🇾 #Беларусь – 4 автора; 🇮🇷 #Иран – 3 автора; 🇻🇳 #Вьетнам – 2 автора; 🇹🇿 #Танзания – 2 автора; 🇹🇷 #Турция…»
Statistics of the journal "Mining Science and Technology" by the end of 2024
The distribution of articles by section:
📌 Beneficiation and processing of natural and technogenic raw materials – 23%;
📌 Safety in mining and processing industry and environmental protection – 23%;
📌 Mining rock properties. Rock mechanics and geophysics – 20%;
📌 Geology of mineral deposits – 14%;
📌 Power engineering, automation, and energy performance – 9%;
📌 Mineral resources exploitation – 9%;
📌 Mining machinery, transport, and mechanical engineering – 3%.
Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈
#inenglish #MST
The distribution of articles by section:
📌 Beneficiation and processing of natural and technogenic raw materials – 23%;
📌 Safety in mining and processing industry and environmental protection – 23%;
📌 Mining rock properties. Rock mechanics and geophysics – 20%;
📌 Geology of mineral deposits – 14%;
📌 Power engineering, automation, and energy performance – 9%;
📌 Mineral resources exploitation – 9%;
📌 Mining machinery, transport, and mechanical engineering – 3%.
Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈
#inenglish #MST
mst.misis.ru
Mining Science and Technology (Russia)
Peer-rewieved journal
👍2❤1⚡1🔥1
Статистика журнала "Горные науки и технологии" по итогам 2024 г.
Распределение статей по разделам:
📌 Обогащение, переработка минерального и техногенного сырья – 23%;
📌 Технологическая безопасность в минерально-сырьевом комплексе и охрана окружающей среды – 23%;
📌 Свойства горных пород. Геомеханика и геофизика – 20%;
📌 Геология месторождений полезных ископаемых – 14%;
📌 Энергетика, автоматизация и энергоэффективность – 9%;
📌 Разработка месторождений полезных ископаемых – 9%;
📌 Горные машины, транспорт и машиностроение – 3%.
Подписывайтесь на ТГ-канал журнала:
👉 t.iss.one/MinSciTech 👈
#нарусскомязыке #ГНиТ
Распределение статей по разделам:
📌 Обогащение, переработка минерального и техногенного сырья – 23%;
📌 Технологическая безопасность в минерально-сырьевом комплексе и охрана окружающей среды – 23%;
📌 Свойства горных пород. Геомеханика и геофизика – 20%;
📌 Геология месторождений полезных ископаемых – 14%;
📌 Энергетика, автоматизация и энергоэффективность – 9%;
📌 Разработка месторождений полезных ископаемых – 9%;
📌 Горные машины, транспорт и машиностроение – 3%.
Подписывайтесь на ТГ-канал журнала:
👉 t.iss.one/MinSciTech 👈
#нарусскомязыке #ГНиТ
mst.misis.ru
Mining Science and Technology (Russia)
Peer-rewieved journal
⚡1👍1🔥1👏1
Можно ли улучшить качество планирования отработки месторождения открытым способом?
Планирование добычи на открытых горных работах (планирование карьерной разработки) включает в себя определение того, какие блоки в пределах конечного (проектной) контура карьера должны добываться каждый год и куда эти блоки должны транспортироваться, например, на мельницу/обогатительную фабрику, в отвал или на рудный склад, чтобы максимизировать чистую приведенную стоимость. Долгосрочное планирование добычи на открытых горных работах играет ключевую роль в оценке проектов по добыче полезных ископаемых. Важный вклад в эту область горных наук представлен в работе, в которой был разработан алгоритм, использующий теорию графов и динамическое программирование для определения конечного контура карьера, максимизирующий доход. Кроме того, при решении этой задачи планирования необходимо учитывать различные эксплуатационные ограничения. Исследования, результаты которых представлены на страницах журнала "Горные науки и технологии", показали, что использование альтернативных алгоритмов расчета блочной модели карьера позволят повысить качество планирования отработки месторождения.
Более подробно - в статье журнала "Горные науки и технологии":
📌 Хасоздемир К., Эрчелеби С. Повышение эффективности целочисленных моделей для решения задачи долгосрочного планирования добычи на открытых горных работах путем установления переменных решений на основе параметрического анализа конечного контура карьера. Горные науки и технологии. 2024;9(2):74-84. https://doi.org/10.17073/2500-0632-2023-09-156
Подписывайтесь на ТГ-канал журнала:
👉 t.iss.one/MinSciTech 👈
#нарусскомязыке #ГНиТ #открытыегорныеработы #планирование #добыча #оптимизация #программирование #псевдопоток
Планирование добычи на открытых горных работах (планирование карьерной разработки) включает в себя определение того, какие блоки в пределах конечного (проектной) контура карьера должны добываться каждый год и куда эти блоки должны транспортироваться, например, на мельницу/обогатительную фабрику, в отвал или на рудный склад, чтобы максимизировать чистую приведенную стоимость. Долгосрочное планирование добычи на открытых горных работах играет ключевую роль в оценке проектов по добыче полезных ископаемых. Важный вклад в эту область горных наук представлен в работе, в которой был разработан алгоритм, использующий теорию графов и динамическое программирование для определения конечного контура карьера, максимизирующий доход. Кроме того, при решении этой задачи планирования необходимо учитывать различные эксплуатационные ограничения. Исследования, результаты которых представлены на страницах журнала "Горные науки и технологии", показали, что использование альтернативных алгоритмов расчета блочной модели карьера позволят повысить качество планирования отработки месторождения.
Более подробно - в статье журнала "Горные науки и технологии":
📌 Хасоздемир К., Эрчелеби С. Повышение эффективности целочисленных моделей для решения задачи долгосрочного планирования добычи на открытых горных работах путем установления переменных решений на основе параметрического анализа конечного контура карьера. Горные науки и технологии. 2024;9(2):74-84. https://doi.org/10.17073/2500-0632-2023-09-156
Подписывайтесь на ТГ-канал журнала:
👉 t.iss.one/MinSciTech 👈
#нарусскомязыке #ГНиТ #открытыегорныеработы #планирование #добыча #оптимизация #программирование #псевдопоток
mst.misis.ru
Enhancing the performance of integer models for addressing the long-term production planning problem in open pit mines by decision…
⚡1❤1👍1🔥1🙏1
Is it possible to improve the quality of planning for open-pit mines?
Open-pit mine production scheduling (OPMPS) includes determining which blocks, within the final pit limit, should be mined each year and where the blocks should be transported, such as to a mill, trash dump, or stockpile, in order to maximize net present value (NPV). Long-term production planning for open-pit mine operations plays a key role in the assessment of mining projects. An important contribution in this field is presented in paper, wherein an algorithm developed that utilizes graph theory and dynamic programming to identify the ultimate pit limit that maximizes revenue. Furthermore, it is necessary to take into account various operational limitations when addressing this scheduling problem. The research, the results of which are presented on the pages of the journal "Mining Science and Technology", has shown that the use of alternative algorithms for calculating the block model of a quarry will improve the quality of field development planning.
For more information, see the article:
📌 Hasozdemir K., Erçelebi S. Enhancing the performance of integer models for addressing the long-term production planning problem in open pit mines by decision variable fixation based on parametric analysis of the final pit limit. Mining Science and Technology (Russia). 2024;9(2):74-84. https://doi.org/10.17073/2500-0632-2023-09-156
Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈
#inenglish #MST #openpitmining #longtermproduction #production #scheduling #optimization #programming #pseudoflow
Open-pit mine production scheduling (OPMPS) includes determining which blocks, within the final pit limit, should be mined each year and where the blocks should be transported, such as to a mill, trash dump, or stockpile, in order to maximize net present value (NPV). Long-term production planning for open-pit mine operations plays a key role in the assessment of mining projects. An important contribution in this field is presented in paper, wherein an algorithm developed that utilizes graph theory and dynamic programming to identify the ultimate pit limit that maximizes revenue. Furthermore, it is necessary to take into account various operational limitations when addressing this scheduling problem. The research, the results of which are presented on the pages of the journal "Mining Science and Technology", has shown that the use of alternative algorithms for calculating the block model of a quarry will improve the quality of field development planning.
For more information, see the article:
📌 Hasozdemir K., Erçelebi S. Enhancing the performance of integer models for addressing the long-term production planning problem in open pit mines by decision variable fixation based on parametric analysis of the final pit limit. Mining Science and Technology (Russia). 2024;9(2):74-84. https://doi.org/10.17073/2500-0632-2023-09-156
Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈
#inenglish #MST #openpitmining #longtermproduction #production #scheduling #optimization #programming #pseudoflow
👍2❤1⚡1🔥1👏1
Представляем отдельные статьи номера (№3, 2024) журнала "Горные науки и технологии":
Системный подход к оценке экологической безопасности при эксплуатации объектов метрополитена, основанный на моделировании развития дефектов в конструкциях тоннелей под действием гидрогеологических факторов, позволит структурировать имеющуюся информацию по потенциальным авариям, выработать методы мониторинга и меры по минимизации рисков, ведущих к снижению экологической устойчивости подземных объектов транспортной структуры города.
Более подробно - в статье журнала "Горные науки и технологии":
📌 Жуков С.А. Обоснование экологической безопасности при эксплуатации объектов метрополитена с учетом гидрогеологического риска. Горные науки и технологии. 2024;9(3):283-291. https://doi.org/10.17073/2500-0632-2024-04-259
Подписывайтесь на ТГ-канал журнала:
👉 t.iss.one/MinSciTech 👈
#нарусскомязыке #ГНиТ #метрополитен #экология #безопасность #инновация #риски #геология #транспорт #гидрогеология #устойчивость #авария #мониторинг #тоннель #технология #строительство #эмиссия #энергоэффективность #бетон #дефекты #выработка #плывун #конструкция #горизонт #скважина #обделка #деформация #выщелачивание #тюбинг #моделирование #геомеханика #гидроизоляция #утилизация #отходы
Системный подход к оценке экологической безопасности при эксплуатации объектов метрополитена, основанный на моделировании развития дефектов в конструкциях тоннелей под действием гидрогеологических факторов, позволит структурировать имеющуюся информацию по потенциальным авариям, выработать методы мониторинга и меры по минимизации рисков, ведущих к снижению экологической устойчивости подземных объектов транспортной структуры города.
Более подробно - в статье журнала "Горные науки и технологии":
📌 Жуков С.А. Обоснование экологической безопасности при эксплуатации объектов метрополитена с учетом гидрогеологического риска. Горные науки и технологии. 2024;9(3):283-291. https://doi.org/10.17073/2500-0632-2024-04-259
Подписывайтесь на ТГ-канал журнала:
👉 t.iss.one/MinSciTech 👈
#нарусскомязыке #ГНиТ #метрополитен #экология #безопасность #инновация #риски #геология #транспорт #гидрогеология #устойчивость #авария #мониторинг #тоннель #технология #строительство #эмиссия #энергоэффективность #бетон #дефекты #выработка #плывун #конструкция #горизонт #скважина #обделка #деформация #выщелачивание #тюбинг #моделирование #геомеханика #гидроизоляция #утилизация #отходы
mst.misis.ru
Vol 9, No 3 (2024)
Peer-rewieved journal
⚡1❤1👍1🔥1😁1
We present the articles of the third issue of scientific journal "Mining Science and Technology” (Russia) for 2024:
A systematic approach to evaluating environmental safety in metro operations, based on modelling the development of defects in tunnel structures under the influence of hydrogeological factors, will help organize existing information on potential accidents and develop monitoring methods and measures to minimize risks that compromise the environmental sustainability of underground transport infrastructure.
For more information, see the article:
📌 Zhukov S.A. Substantiation of environmental safety in metro facility operations considering hydrogeological risks. Mining Science and Technology (Russia). 2024;9(3):283-291. https://doi.org/10.17073/2500-0632-2024-04-259
Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈
#inenglish #MST #metro #underground #subway #ecology #safety #innovation #risks #geology #transport #hydrogeology #sustainability #accident #monitoring #tunnel #technology #construction #emission #energy #efficiency #concrete #defects #extraction #quicksand #aquifer #borehole #lining #deformation #leaching #tubbing #modeling #geomechanics #waterproofing #disposal #waste
A systematic approach to evaluating environmental safety in metro operations, based on modelling the development of defects in tunnel structures under the influence of hydrogeological factors, will help organize existing information on potential accidents and develop monitoring methods and measures to minimize risks that compromise the environmental sustainability of underground transport infrastructure.
For more information, see the article:
📌 Zhukov S.A. Substantiation of environmental safety in metro facility operations considering hydrogeological risks. Mining Science and Technology (Russia). 2024;9(3):283-291. https://doi.org/10.17073/2500-0632-2024-04-259
Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈
#inenglish #MST #metro #underground #subway #ecology #safety #innovation #risks #geology #transport #hydrogeology #sustainability #accident #monitoring #tunnel #technology #construction #emission #energy #efficiency #concrete #defects #extraction #quicksand #aquifer #borehole #lining #deformation #leaching #tubbing #modeling #geomechanics #waterproofing #disposal #waste
👍2❤1⚡1🔥1😁1🙏1
Как оценить модуль деформации блочного массива на основе дискретно-элементного моделирования?
Модуль деформации массива горных пород является одним из основных параметров геомеханики тоннелей, горных выработок и других геотехнических сооружений, возводимых в горных породах. Механические свойства массива горных пород как трещиноватой среды определяются ненарушенной породой, относительной схемой размещения системы трещин, геометрическими параметрами трещин, а также их механическими свойствами. Механические свойства, определяемые системами трещин как плоскими нарушениями сплошности, зависят от их масштаба и направления. Наиболее важным фактором, влияющим также на деформационное поведение массива, является жесткость его трещин и нарушений сплошности. Исследования основаны на рассмотрении модуля анизотропной деформации блочных массивов горных пород, образованных тремя системами трещин, – двумя ортогональными, секущимися третьей. Работы выполнялись путем дискретно-элементного моделирования представительных объемов блочных массивов. Результаты исследований позволяют оценить модуль деформации блочного массива в различных направлениях без проведения лабораторных и полевых испытаний или эмпирических соотношений.
Более подробно - в статье журнала "Горные науки и технологии":
📌 Ахрами O., Джавахери Купаи Х., Ахангари К. Определение модуля деформации и характеристик анизотропного поведения блочных массивов горных пород. Горные науки и технологии. 2024;9(2):116-133. https://doi.org/10.17073/2500-0632-2023-08-143
Подписывайтесь на ТГ-канал журнала:
👉 t.iss.one/MinSciTech 👈
#нарусскомязыке #ГНиТ #анизотропия #деформация #модуль #массив #породы #трещины #нагружение #разрушение #жесткость #прочность #сжатие #сдвиг #сопротивление #напряжение #смещение #скольжение #кварц #моделирование #коэффициент #индекс #блоки #деформации #материал #поверхность #структура #границы #эксперимент #геомеханика
Модуль деформации массива горных пород является одним из основных параметров геомеханики тоннелей, горных выработок и других геотехнических сооружений, возводимых в горных породах. Механические свойства массива горных пород как трещиноватой среды определяются ненарушенной породой, относительной схемой размещения системы трещин, геометрическими параметрами трещин, а также их механическими свойствами. Механические свойства, определяемые системами трещин как плоскими нарушениями сплошности, зависят от их масштаба и направления. Наиболее важным фактором, влияющим также на деформационное поведение массива, является жесткость его трещин и нарушений сплошности. Исследования основаны на рассмотрении модуля анизотропной деформации блочных массивов горных пород, образованных тремя системами трещин, – двумя ортогональными, секущимися третьей. Работы выполнялись путем дискретно-элементного моделирования представительных объемов блочных массивов. Результаты исследований позволяют оценить модуль деформации блочного массива в различных направлениях без проведения лабораторных и полевых испытаний или эмпирических соотношений.
Более подробно - в статье журнала "Горные науки и технологии":
📌 Ахрами O., Джавахери Купаи Х., Ахангари К. Определение модуля деформации и характеристик анизотропного поведения блочных массивов горных пород. Горные науки и технологии. 2024;9(2):116-133. https://doi.org/10.17073/2500-0632-2023-08-143
Подписывайтесь на ТГ-канал журнала:
👉 t.iss.one/MinSciTech 👈
#нарусскомязыке #ГНиТ #анизотропия #деформация #модуль #массив #породы #трещины #нагружение #разрушение #жесткость #прочность #сжатие #сдвиг #сопротивление #напряжение #смещение #скольжение #кварц #моделирование #коэффициент #индекс #блоки #деформации #материал #поверхность #структура #границы #эксперимент #геомеханика
👍2❤1⚡1🔥1👏1
How to estimate the modulus of deformation of a block rock masses using discrete element simulations?
The deformation modulus of rock mass is a fundamental parameter in the geomechanics of tunnels, mining, and other geotechnical rock-supported facilities. The mechanical properties of a rock mass, seen as a fractured medium, are determined by the intact rock, the pattern of relative joint-sets, the geometrical arrangement of the joints, and their mechanical properties. Joint sets, acting as planar discontinuities, confer scale and direction-dependent mechanical properties. The critical factor influencing the deformational behavior of a rock mass is the stiffness of its fractures and discontinuities. The present study investigates the anisotropic deformation modulus of blocky rock masses formed by three intersecting joint sets, including two orthogonal sets. This was achieved through discrete element simulations of representative volumes of blocky rock masses. These studies facilitate the estimation of the blocky rock mass deformation modulus in different directions without the need for laboratory and in-situ tests or empirical relationships.
For more information, see the article:
📌 Ahrami O., Javaheri Koupaei H., Ahangari K. Determination of deformation modulus and characterization of anisotropic behavior of blocky rock masses. Mining Science and Technology (Russia). 2024;9(2):116-133. https://doi.org/10.17073/2500-0632-2023-08-143
Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈
#inenglish #MST #anisotropy #deformation #modulus #mass #rocks #loading #fracture #stiffness #strength #shear #resistance #stress #displacement #sliding #quartz #modeling #coefficient #index #blocks #deformations #material #surface #structure #boundary #experiment #geomechanics #JRC #UCS #GSI #simulation
The deformation modulus of rock mass is a fundamental parameter in the geomechanics of tunnels, mining, and other geotechnical rock-supported facilities. The mechanical properties of a rock mass, seen as a fractured medium, are determined by the intact rock, the pattern of relative joint-sets, the geometrical arrangement of the joints, and their mechanical properties. Joint sets, acting as planar discontinuities, confer scale and direction-dependent mechanical properties. The critical factor influencing the deformational behavior of a rock mass is the stiffness of its fractures and discontinuities. The present study investigates the anisotropic deformation modulus of blocky rock masses formed by three intersecting joint sets, including two orthogonal sets. This was achieved through discrete element simulations of representative volumes of blocky rock masses. These studies facilitate the estimation of the blocky rock mass deformation modulus in different directions without the need for laboratory and in-situ tests or empirical relationships.
For more information, see the article:
📌 Ahrami O., Javaheri Koupaei H., Ahangari K. Determination of deformation modulus and characterization of anisotropic behavior of blocky rock masses. Mining Science and Technology (Russia). 2024;9(2):116-133. https://doi.org/10.17073/2500-0632-2023-08-143
Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈
#inenglish #MST #anisotropy #deformation #modulus #mass #rocks #loading #fracture #stiffness #strength #shear #resistance #stress #displacement #sliding #quartz #modeling #coefficient #index #blocks #deformations #material #surface #structure #boundary #experiment #geomechanics #JRC #UCS #GSI #simulation
mst.misis.ru
Determination of deformation modulus and characterization of anisotropic behavior of blocky rock masses | Ahrami | Mining Science…
👍3⚡1❤1🔥1👏1
Представляем отдельные статьи номера (№3, 2024) журнала "Горные науки и технологии":
Модель, полученная в результате работы, может быть применена для общего анализа работоспособности и устойчивости, а также проверки правильности подбора ключевых элементов проектируемых систем штанговых насосных установок с частотно-регулируемым приводом.
Более подробно - в статье журнала "Горные науки и технологии":
📌 Ершов М.С., Ефимов Е.С. Устойчивость регулируемого привода штанговой насосной установки в рабочих режимах и при провалах напряжения в сети. Горные науки и технологии. 2024;9(3):292-303. https://doi.org/10.17073/2500-0632-2024-01-213
Подписывайтесь на ТГ-канал журнала:
👉 t.iss.one/MinSciTech 👈
#нарусскомязыке #ГНиТ #насос #привод #регулирование #напряжение #частота #тормоз #режим #энергия #сеть #генератор #ток #момент #мощность #скорость #выпрямитель #инвертор #батарея #управление #сигнал #модель #MatLab #Simulink #алгоритм #авария #защита #рекуперация #компенсация #нагрузка #колебания #устойчивость
Модель, полученная в результате работы, может быть применена для общего анализа работоспособности и устойчивости, а также проверки правильности подбора ключевых элементов проектируемых систем штанговых насосных установок с частотно-регулируемым приводом.
Более подробно - в статье журнала "Горные науки и технологии":
📌 Ершов М.С., Ефимов Е.С. Устойчивость регулируемого привода штанговой насосной установки в рабочих режимах и при провалах напряжения в сети. Горные науки и технологии. 2024;9(3):292-303. https://doi.org/10.17073/2500-0632-2024-01-213
Подписывайтесь на ТГ-канал журнала:
👉 t.iss.one/MinSciTech 👈
#нарусскомязыке #ГНиТ #насос #привод #регулирование #напряжение #частота #тормоз #режим #энергия #сеть #генератор #ток #момент #мощность #скорость #выпрямитель #инвертор #батарея #управление #сигнал #модель #MatLab #Simulink #алгоритм #авария #защита #рекуперация #компенсация #нагрузка #колебания #устойчивость
👍3❤1🔥1👏1😁1
We present the articles of the third issue of scientific journal "Mining Science and Technology” (Russia) for 2024:
The resulting model can be used for general analysis of operability and stability, as well as for verifying the correct selection of key elements in the design of sucker-rod pump unit systems with variable frequency drives.
For more information, see the article:
📌 Ershov M.S., Efimov E.S. Stability of a controlled sucker-rod pump unit drive under operating conditions and during voltage dips in the electrical network. Mining Science and Technology (Russia). 2024;9(3):292-303. https://doi.org/10.17073/2500-0632-2024-01-213
Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈
#inenglish #MST #pump #drive #control #voltage #frequency #brake #mode #energy #network #generator #current #torque #power #speed #rectifier #inverter #battery #signal #model #Matlab #Simulink #algorithm #emergency #protection #recovery #compensation #load #fluctuations #stability
The resulting model can be used for general analysis of operability and stability, as well as for verifying the correct selection of key elements in the design of sucker-rod pump unit systems with variable frequency drives.
For more information, see the article:
📌 Ershov M.S., Efimov E.S. Stability of a controlled sucker-rod pump unit drive under operating conditions and during voltage dips in the electrical network. Mining Science and Technology (Russia). 2024;9(3):292-303. https://doi.org/10.17073/2500-0632-2024-01-213
Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈
#inenglish #MST #pump #drive #control #voltage #frequency #brake #mode #energy #network #generator #current #torque #power #speed #rectifier #inverter #battery #signal #model #Matlab #Simulink #algorithm #emergency #protection #recovery #compensation #load #fluctuations #stability
mst.misis.ru
Stability of a controlled sucker-rod pump unit drive under operating conditions and during voltage dips in the electrical network…
❤2👍2⚡1🔥1👏1
How can the efficiency of flotation processing of complex ores be improved?
Flotation beneficiation plays a leading role in the processing most ores. The efficiency of this process is ensured by the correct selection of operating modes, which involves choosing the most selective reagents and determining their optimal consumption. The conducted research, presented in the journal Mining Science and Technology, allowed to find a new methodological approach to the study of ore flotation beneficiation using ionometry methods. The data obtained from ion-selective sensors significantly deepen our insight into the transformations occurring during the flotation process and allow for consideration of possible adverse factors that hinder effective process progression. A universal flowchart for flotation studies with ion-selective sensors has been developed, facilitating the application of this approach to various ores. The implementation of the results from this comparative analysis has led to a 7.8% increase in beneficiation efficiency while reducing reagent consumption. Additionally, the insights gained into the electrochemical processes occurring allowed for assumptions about the adverse factors affecting flotation outcomes. In conclusion, a model for the potential application of this approach at existing enterprises was proposed, including the implementation of an “intelligent assistant” for flotation operators based on the developed electrochemical models.
For more information, see the article:
📌 Yakovleva T.A., Romashev A.O., Mashevsky G.N. Enhancing flotation beneficiation efficiency of complex ores using ionometry methods. Mining Science and Technology (Russia). 2024;9(2):146-157. https://doi.org/10.17073/2500-0632-2023-08-145
Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈
#inenglish #MST #flotation #beneficiation #ore #method #ionometry #ion #reagent #experiment #electrode #concentrate #pulp #grinding #modification #selectivity #aeration #sorption #corrosion #depression #kinetics #modeling #optimization #sensor #membrane #xanthate #sulfide #control
Flotation beneficiation plays a leading role in the processing most ores. The efficiency of this process is ensured by the correct selection of operating modes, which involves choosing the most selective reagents and determining their optimal consumption. The conducted research, presented in the journal Mining Science and Technology, allowed to find a new methodological approach to the study of ore flotation beneficiation using ionometry methods. The data obtained from ion-selective sensors significantly deepen our insight into the transformations occurring during the flotation process and allow for consideration of possible adverse factors that hinder effective process progression. A universal flowchart for flotation studies with ion-selective sensors has been developed, facilitating the application of this approach to various ores. The implementation of the results from this comparative analysis has led to a 7.8% increase in beneficiation efficiency while reducing reagent consumption. Additionally, the insights gained into the electrochemical processes occurring allowed for assumptions about the adverse factors affecting flotation outcomes. In conclusion, a model for the potential application of this approach at existing enterprises was proposed, including the implementation of an “intelligent assistant” for flotation operators based on the developed electrochemical models.
For more information, see the article:
📌 Yakovleva T.A., Romashev A.O., Mashevsky G.N. Enhancing flotation beneficiation efficiency of complex ores using ionometry methods. Mining Science and Technology (Russia). 2024;9(2):146-157. https://doi.org/10.17073/2500-0632-2023-08-145
Subscribe to the journal's Telegram channel:
👉t.iss.one/MinSciTech👈
#inenglish #MST #flotation #beneficiation #ore #method #ionometry #ion #reagent #experiment #electrode #concentrate #pulp #grinding #modification #selectivity #aeration #sorption #corrosion #depression #kinetics #modeling #optimization #sensor #membrane #xanthate #sulfide #control
mst.misis.ru
Enhancing flotation beneficiation efficiency of complex ores using ionometry methods | Yakovleva | Mining Science and Technology…
👍3❤1🔥1👏1