Reminder
Mainnet Validators

Please be prepared to vote to enable TVM Update tomorrow on December 19 at 9:00 UTC.

More info »

Mainnet Validators

Please vote for enabling new TVM features.

More info »


1) Please check that your node software is updated to the latest version (it should be on 6897b56 commit). If your node is outdated, upgrade immediately via upgrade command in MyTonCtrl.

2) To vote via mytonctrl you need to use the command:

vo 85710661254977802982316316252924652442954445780328502685001287213020431864656

If 75%+ of the positive votes of the validators are collected in two
rounds of next 6 rounds, then the proposal will be accepted.

New hardware requirements

Validators:
* 16 x Cores CPU
* 64GB Memory
* 1TB NVME SSD OR Provisioned 64+k IOPS storage
* 1 Gbit/s network connectivity

Full Nodes:
* 16 x Cores CPU
* 64GB Memory
* 1TB SSD OR Provisioned 32+k IOPS storage
* 1 Gbit/s network connectivity

Archival Nodes:
* 16 x Cores CPU
* 128GB ECC Memory
* 3.8TB SSD OR Provisioned 32+k IOPS storage (3.8TB assumes usage of ZFS volume with compression enabled).
* 1 Gbit/s network connectivity

Note that disk performance is important.

Guidelines for API clients

Public liteservers (from the global config) and free plans in TON API and Toncenter exist to get you started with TON quickly. It can be used for learning to program in TON, or for applications and scripts that do not require 100% uptime.

If you're a developer of a popular product you can use:

— More advanced plans in Toncenter or TON API, which provide more requests per second and better stability.

— Other APIs like dton, re:doubt, TON Access may also provide extended plans.

— Run your own node. In this case please pay attention to the hardware requirements.

BSC Bridge Mantainance

Toncoin transfers between the BSC and TON networks via bridge.ton.org have been suspended for unscheduled technical works. The work will take approximately one week. We apologize for any inconvenience.

All funds are safe and all unprocessed transfers will be processed after the technical work is completed.

Toncoin and token transfers between Ethereum and TON networks are operating as normal.

Recently a highload wallet of @wallet in mainnet was stuck because current gas limit (1M) is not enough to clean up old queries, thus locking funds inside. More technical details can be found in crypto/smartcont/highload-wallet-v2-code.fc.

While locked funds represent only a small part of the total user assets on platform, loss of access to it can undermine the trust and user experience in TON.

To restore access to funds we plan to propose to validators temporarily increase gas limit for account EQD_v9j1rlsuHHw2FIhcsCFFSD367ldfDdCKcsNmNpIRzUlu.

Next update planned to January 18 will contains (disabled by default) corresponding changes among other things and, once network will be upgraded, we will propose validators to vote for increased gas limits.

When developing node software, we strive for the best user experience. To this end, we collaborate with projects in the ecosystem, including exchanges and wallets. In particular, in situations where it is possible to correct problems without undermining monetary policy (without printing new money), we develop and invite validators to approve changes to the node like those mentioned above. In addition, contracts, guidelines, tools and documentation are being improved to prevent such situations from arising.

Scheduled network update on January 18

We are asking validators to schedule a time on January 18 at 9:00 UTC for validator software update.

This update is mandatory and contains optimization of node stability as well as disabled by default changes to gas_limit behavior.

Mainnet full node and lite server owners

Please update your node software (see "Target versions")

Instructions for update

Target versions:
mytonctrl b9d5937
validator 9728bc6

This update is mandatory for validators and lite servers.

Update includes:

- Fixes in how gas in transactions on special accounts is accounted in block limit.
- Improvements in LS behavior
- Improvements in DHT work and storage, CellDb, config.json ammendment,
peer misbehavior detection, validator session stats collection,
emulator.

Update also includes conditional increase of gas limit which may be activated by validator voting.

Scheduled network update on January 26

We are asking validators to schedule a time on January 26 at 9:00 UTC for validator software update.

This update is mandatory and contains changes to gas_limit behavior that is more gentle for contracts and services. Technical details of upcoming updated and information for smart-contract developers is here.

Mainnet full node and lite server owners

Please update your node software (see "Target versions")

Instructions for update

Target versions:
mytonctrl b9d5937
validator 8a9ff33

This update is mandatory for validators and lite servers.

Update includes:
- Improvement in how gas in transactions on special accounts is accounted in block limit.
- Solution for block is not applied issue
- Changes of how library cells are handled

Mainnet Validators

Please be prepared to vote for new gas limits behavior and parameters on February 1 at 9:00 UTC.

Details can be found here. Proposed changes will make block generation, as well as TVM operations regarding libraries more predictable and thus more safe.

All validators MUST be updated to the latest version before voting. Target versions:
mytonctrl b9d5937
validator 8a9ff33

Mainnet Validators

Please vote for new gas limits behavior and parameters

More info »


1) Please check that your node software is updated to the latest version (validator should be on 8a9ff33 commit). If your node is outdated, upgrade immediately via upgrade command in MyTonCtrl.

2) Update mytonctrl (validator should be on da1811d commit), use commands:

update

set duplicateSendfile true

2) To vote via mytonctrl you need to use the command:

vo 103351160959426487254455866498906719583068006422970295467232122110660230563283
vo 20149481433343766729971377917926966688629021535513398999071024734089315101195
vo 26493909155671493333100442738656102962830077543704392831296933554790654390192

If 75%+ of the positive votes of the validators are collected in two
rounds of next 6 rounds, then the proposal will be accepted.

The TON-BNB Smart Chain bridge is back on track

All funds are safe and all transfers have been processed.

We thank users for their patience.

Scheduled network update on February 21

We are asking validators and lite server owners to schedule a time on February 21 at 9:00 UTC for validator software update.

This update is mandatory and contains changes improvements to validator synchronization as well as reliability of lite servers.

Upd: network update was postponed to February 26

Network update is moved to February 26 at 10:00 UTC.

Mainnet Validators and Liteserver owners

Please update your node software (see "Target versions")

Instructions for update. Note new section 5 for validators and section 6 for Liteserver owners.

Target versions:
mytonctrl b9d5937
validator 692211f

This update is mandatory for validators and lite servers.

Update includes:
- LS improvements: remote runmethods with full c7 and libs, caching, logging
- Precise control of open files
- Improvement of validator synchronization

Scheduled network update on March 13

We are asking validators to schedule a time on March 13 at 9:00 UTC for validator software update.

This update is mandatory and contains TVM improvements that facilitate fee calculations and handling Merkle-proofs on-chain.

Voting for activation of these improvements is scheduled for March 15, details on the voting can be found here.

Mainnet Validators and Liteserver owners

Please update your node software (see "Target versions")

Instructions for update

Target versions:
mytonctrl 244cad8
validator 200508c

This update is mandatory for validators and lite servers and is required for voting scheduled for March 15.

Mainnet Validators

Please vote for activation of new opcodes for gas estimation.

More info about opcodes »
More info about voting »

1) Please check that your node software is updated to the latest version (validator should be on 200508c commit). If your node is outdated, upgrade immediately via upgrade command in MyTonCtrl.

2) Please check that your mytonctrl is updated to the latest version (should be on 244cad8 commit). If necessary, you can update your mytonctrl via:

update

command.

3) To vote via mytonctrl you need to use the command:

vo 62943188213554950431567175890704900183650560017761039378090136381016705792762
vo 70812101792553497242391430491941881046928125710785036909221479087825374611301

If 75%+ of the positive votes of the validators are collected in two
rounds of next 6 rounds, then the proposal will be accepted.

Update: proposals were accepted on March 16.

ATTENTION FOR VALIDATORS — ACTION REQUIRED

We anticipate a significant increase in network activity starting in mid-April.

In order to keep the network running smoothly, please make sure your validator matches the configuration below.

If it does not match, please upgrade your hardware within the next week.

This is critical and necessary.

Minimal validators hardware:
* 16 x Cores CPU
* 128GB Memory
* 1TB NVME SSD OR Provisioned 64+k IOPS storage
* 1 Gbit/s network connectivity

We draw special attention of validators to IOPS disk requirements, it is crucially important for smooth network operation.

If you have several validators - upgrade one by one.