📰 Intel Loses One Of Its NPU Driver Maintainers: "Let Someone Else Deal With The NPU Bugs"
Following the numerous Intel Linux developer departures last month from the company following layoffs at Intel and others deciding to voluntarily leave, there is another one to report today. One of the Intel IVPU accelerator driver maintainers for the Intel NPUs found in Core Ultra SoCs is departing the company...
🔗 Source:
👉@sysadminoff
https://www.phoronix.com/news/Intel-NPU-Maintainer-Leaves
  
  Following the numerous Intel Linux developer departures last month from the company following layoffs at Intel and others deciding to voluntarily leave, there is another one to report today. One of the Intel IVPU accelerator driver maintainers for the Intel NPUs found in Core Ultra SoCs is departing the company...
🔗 Source:
👉@sysadminoff
https://www.phoronix.com/news/Intel-NPU-Maintainer-Leaves
Phoronix
  
  Intel Loses One Of Its NPU Driver Maintainers: "Time To Let Someone Else Deal With The NPU Bugs"
  Following the numerous Intel Linux developer departures last month from the company following layoffs at Intel and others deciding to voluntarily leave, there is another one to report today
  📰 The free unusual extreme speed shooter Ecto added Linux support
Ecto is a very fast-paced shooter playable in solo or online co-op up to 8 players, where you bunny hop around blasting robots with flower guns..Read the full article on GamingOnLinux.
🔗 Source:
👉@sysadminoff
https://www.gamingonlinux.com/2025/09/the-free-unusual-extreme-speed-shooter-ecto-added-linux-support/
  
  Ecto is a very fast-paced shooter playable in solo or online co-op up to 8 players, where you bunny hop around blasting robots with flower guns..Read the full article on GamingOnLinux.
🔗 Source:
👉@sysadminoff
https://www.gamingonlinux.com/2025/09/the-free-unusual-extreme-speed-shooter-ecto-added-linux-support/
GamingOnLinux
  
  The free unusual extreme speed shooter Ecto added Linux support
  Ecto is a very fast-paced shooter playable in solo or online co-op up to 8 players, where you bunny hop around blasting robots with flower guns.
  Puppy Linux BookwormPup64 10.0.12 Is Out Based on Debian 12.12 “Bookworm”
Puppy Linux BookwormPup64 10.0.12 distribution is now available for download based on the Debian 12.12 "Bookworm" repositories. Here's what's new!
The post Puppy Linux BookwormPup64 10.0.12 Is Out Based on Debian 12.12 “Bookworm” appeared first on 9to5Linux - do not reproduce this article without permission. This RSS feed is intended for readers, not scrapers.
👉@sysadminoff
https://9to5linux.com/puppy-linux-bookwormpup64-10-0-12-is-out-based-on-debian-12-12-bookworm
  Puppy Linux BookwormPup64 10.0.12 distribution is now available for download based on the Debian 12.12 "Bookworm" repositories. Here's what's new!
The post Puppy Linux BookwormPup64 10.0.12 Is Out Based on Debian 12.12 “Bookworm” appeared first on 9to5Linux - do not reproduce this article without permission. This RSS feed is intended for readers, not scrapers.
👉@sysadminoff
https://9to5linux.com/puppy-linux-bookwormpup64-10-0-12-is-out-based-on-debian-12-12-bookworm
Unicode 17.0
9 сентября состоялся выпуск 17.0 стандарта кодирования символов Unicode. В этой версии добавлены 4803 новых символа.
Новшества включают в себя:
4298 дополнительных идеографа CJK в новом блоке «CJK Unified Ideographs Extension J», что увеличило общее количество идеографов CJK до более, чем 100000;
четыре новых письменности: толонг-сики, бэри народа Загава, тай йо и символы сидетского языка из ветви древних анатолийских языков;
восемь новых эмодзи: сундук сокровищ, косатка, тромбон, боевое облако, балерина, оползень, искривлённое лицо и волосатое существо. Не включен яблочный огрызок, анонсированный ранее;
знак саудовского рияла;
символы астероидов и геомантии;
другие вспомогательные символы.
На данный момент стандарт содержит 159801 символ.
>>> Полное описание этой версии
>>> Файлы с данными
  
  
  
unicode, кодировка, стандарт, язык
👉@sysadminoff
https://www.linux.org.ru/news/opensource/18056080
  
  9 сентября состоялся выпуск 17.0 стандарта кодирования символов Unicode. В этой версии добавлены 4803 новых символа.
Новшества включают в себя:
4298 дополнительных идеографа CJK в новом блоке «CJK Unified Ideographs Extension J», что увеличило общее количество идеографов CJK до более, чем 100000;
четыре новых письменности: толонг-сики, бэри народа Загава, тай йо и символы сидетского языка из ветви древних анатолийских языков;
восемь новых эмодзи: сундук сокровищ, косатка, тромбон, боевое облако, балерина, оползень, искривлённое лицо и волосатое существо. Не включен яблочный огрызок, анонсированный ранее;
знак саудовского рияла;
символы астероидов и геомантии;
другие вспомогательные символы.
На данный момент стандарт содержит 159801 символ.
>>> Полное описание этой версии
>>> Файлы с данными
unicode, кодировка, стандарт, язык
👉@sysadminoff
https://www.linux.org.ru/news/opensource/18056080
www.linux.org.ru
  
  Unicode 17.0
  9 сентября состоялся выпуск 17.0 стандарта кодирования символов Unicode https://home.unicode.org/about-unicode . В этой версии добавлены 4803 новых символа. Новшества включают в себя: 4298 дополнительных идеографа CJK в новом блоке «CJK Unified Ideog...
  📰 Puppy Linux BookwormPup64 10.0.12 Is Out Based on Debian 12.12 “Bookworm”
Puppy Linux BookwormPup64 10.0.12 distribution is now available for download based on the Debian 12.12 "Bookworm" repositories. Here's what's new!
🔗 Source:
👉@sysadminoff
https://9to5linux.com/puppy-linux-bookwormpup64-10-0-12-is-out-based-on-debian-12-12-bookworm
  
  Puppy Linux BookwormPup64 10.0.12 distribution is now available for download based on the Debian 12.12 "Bookworm" repositories. Here's what's new!
🔗 Source:
👉@sysadminoff
https://9to5linux.com/puppy-linux-bookwormpup64-10-0-12-is-out-based-on-debian-12-12-bookworm
9to5Linux
  
  Puppy Linux BookwormPup64 10.0.12 Is Out Based on Debian 12.12 "Bookworm" - 9to5Linux
  Puppy Linux BookwormPup64 10.0.12 distribution is now available for download based on the Debian 12.12 "Bookworm" repositories.
  📰 Airborne Empire an open-world city-building RPG gets a Linux / Steam Deck freezing fix
Airborne Empire is an interesting hybrid that mixes city-building, with open-world exploration and the latest update should fix it up on Linux / Steam Deck..Read the full article on GamingOnLinux.
🔗 Source:
👉@sysadminoff
https://www.gamingonlinux.com/2025/09/airborne-empire-an-open-world-city-building-rpg-gets-a-linux-steam-deck-freezing-fix/
  
  Airborne Empire is an interesting hybrid that mixes city-building, with open-world exploration and the latest update should fix it up on Linux / Steam Deck..Read the full article on GamingOnLinux.
🔗 Source:
👉@sysadminoff
https://www.gamingonlinux.com/2025/09/airborne-empire-an-open-world-city-building-rpg-gets-a-linux-steam-deck-freezing-fix/
GamingOnLinux
  
  Airborne Empire an open-world city-building RPG gets a Linux / Steam Deck freezing fix
  Airborne Empire is an interesting hybrid that mixes city-building, with open-world exploration and the latest update should fix it up on Linux / Steam Deck.
  Get Smoother Workspace Transitions in GNOME Shell with This Extension
If you move workspaces in GNOME Shell (Ubuntu’s default desktop) using gestures, but find workspace background sliding alongside your apps distracting, a new extension can help. Created by CleoMenezesJr (Weather O’Clock), Static Workspace Background makes — as I’m sure you’ve guessed — the background a fixed point: it stays firmly in place. As it’s not (currently) possible to set a different wallpaper on each workspace, seeing the same wallpaper, albeit segmented by a vertical bar, slide by zoetrope-style distracts from the element which is different on each virtual desktop: the apps. Static Workspace Background GNOME Shell extension (v48+) affects a […]
You're reading Get Smoother Workspace Transitions in GNOME Shell with This Extension, a blog post from OMG! Ubuntu. Do not reproduce elsewhere without permission.
👉@sysadminoff
https://www.omgubuntu.co.uk/2025/09/static-workspace-background-gnome-extension
  If you move workspaces in GNOME Shell (Ubuntu’s default desktop) using gestures, but find workspace background sliding alongside your apps distracting, a new extension can help. Created by CleoMenezesJr (Weather O’Clock), Static Workspace Background makes — as I’m sure you’ve guessed — the background a fixed point: it stays firmly in place. As it’s not (currently) possible to set a different wallpaper on each workspace, seeing the same wallpaper, albeit segmented by a vertical bar, slide by zoetrope-style distracts from the element which is different on each virtual desktop: the apps. Static Workspace Background GNOME Shell extension (v48+) affects a […]
You're reading Get Smoother Workspace Transitions in GNOME Shell with This Extension, a blog post from OMG! Ubuntu. Do not reproduce elsewhere without permission.
👉@sysadminoff
https://www.omgubuntu.co.uk/2025/09/static-workspace-background-gnome-extension
📰 Want Smoother Workspace Transitions in GNOME Shell? Try This Extension
If you move workspaces in GNOME Shell (Ubuntu’s default desktop) using gestures, but find workspace background sliding alongside your apps distracting, a new extension can help. Created by CleoMenezesJr (Weather O’Clock), Static Workspace Background makes — as I’m sure you’ve guessed — the background a fixed point: it stays firmly in place.
🔗 Source:
👉@sysadminoff
https://www.omgubuntu.co.uk/2025/09/static-workspace-background-gnome-extension
  
  If you move workspaces in GNOME Shell (Ubuntu’s default desktop) using gestures, but find workspace background sliding alongside your apps distracting, a new extension can help. Created by CleoMenezesJr (Weather O’Clock), Static Workspace Background makes — as I’m sure you’ve guessed — the background a fixed point: it stays firmly in place.
🔗 Source:
👉@sysadminoff
https://www.omgubuntu.co.uk/2025/09/static-workspace-background-gnome-extension
OMG! Ubuntu
  
  Stop Wallpaper Moving When You Switch Workspace in GNOME
  Stop distracting wallpaper movement in GNOME Shell workspace transitions with Static Workspace Background extension, keepings the background fixed.
  Hyprland 0.51 Wayland Compositor Adds Fully Configurable Trackpad Gestures
Hyprland 0.51 Wayland compositor is now available with support for fully configurable trackpad gestures and other changes. Here's what's new!
The post Hyprland 0.51 Wayland Compositor Adds Fully Configurable Trackpad Gestures appeared first on 9to5Linux - do not reproduce this article without permission. This RSS feed is intended for readers, not scrapers.
👉@sysadminoff
https://9to5linux.com/hyprland-0-51-wayland-compositor-adds-fully-configurable-trackpad-gestures
  Hyprland 0.51 Wayland compositor is now available with support for fully configurable trackpad gestures and other changes. Here's what's new!
The post Hyprland 0.51 Wayland Compositor Adds Fully Configurable Trackpad Gestures appeared first on 9to5Linux - do not reproduce this article without permission. This RSS feed is intended for readers, not scrapers.
👉@sysadminoff
https://9to5linux.com/hyprland-0-51-wayland-compositor-adds-fully-configurable-trackpad-gestures
TUXEDO Computers Now Supports Fully Automated Installations of Debian 13
TUXEDO Computers releases the TUXEDO WebFAI 2.1 fully automated installation tool with support for the latest Debian 13 "Trixie" operating system.
The post TUXEDO Computers Now Supports Fully Automated Installations of Debian 13 appeared first on 9to5Linux - do not reproduce this article without permission. This RSS feed is intended for readers, not scrapers.
👉@sysadminoff
https://9to5linux.com/tuxedo-computers-now-supports-fully-automated-installations-of-debian-13
TUXEDO Computers releases the TUXEDO WebFAI 2.1 fully automated installation tool with support for the latest Debian 13 "Trixie" operating system.
The post TUXEDO Computers Now Supports Fully Automated Installations of Debian 13 appeared first on 9to5Linux - do not reproduce this article without permission. This RSS feed is intended for readers, not scrapers.
👉@sysadminoff
https://9to5linux.com/tuxedo-computers-now-supports-fully-automated-installations-of-debian-13
❤1
  📰 Hyprland 0.51 Compositor Released With Reworked Gesture System, New Animations
Hyprland 0.51 is now available as the latest feature release for this unique Wayland compositor...
🔗 Source:
👉@sysadminoff
https://www.phoronix.com/news/Hyprland-0.51
  
  Hyprland 0.51 is now available as the latest feature release for this unique Wayland compositor...
🔗 Source:
👉@sysadminoff
https://www.phoronix.com/news/Hyprland-0.51
Phoronix
  
  Hyprland 0.51 Compositor Released With Reworked Gesture System, New Animations
  Hyprland 0.51 is now available as the latest feature release for this unique Wayland compositor.
  AI-powered antivirus and threat detection: ManageEngine Malware Protection Plus
The days of purely signature-driven antivirus and malware protection are over because modern threats evolve too quickly, using advanced techniques that traditional signature databases can't keep up with. ManageEngine Malware Protection Plus (MPP) is a next-generation antivirus solution that leverages AI capabilities to detect malware and contemporary security threats.
Source
👉@sysadminoff
https://4sysops.com/archives/ai-powered-antivirus-and-threat-detection-manageengine-malware-protection-plus/
  The days of purely signature-driven antivirus and malware protection are over because modern threats evolve too quickly, using advanced techniques that traditional signature databases can't keep up with. ManageEngine Malware Protection Plus (MPP) is a next-generation antivirus solution that leverages AI capabilities to detect malware and contemporary security threats.
Source
👉@sysadminoff
https://4sysops.com/archives/ai-powered-antivirus-and-threat-detection-manageengine-malware-protection-plus/
Fwupd 2.0.15 Adds Support for NVIDIA ConnectX-6, ConnectX-7 and ConnectX-8 NICs
Fwupd 2.0.15 Linux firmware updater is now available for download with support for the NVIDIA ConnectX-6, ConnectX-7 and ConnectX-8 NICs and other changes.
The post Fwupd 2.0.15 Adds Support for NVIDIA ConnectX-6, ConnectX-7 and ConnectX-8 NICs appeared first on 9to5Linux - do not reproduce this article without permission. This RSS feed is intended for readers, not scrapers.
👉@sysadminoff
https://9to5linux.com/fwupd-2-0-15-adds-support-for-nvidia-connectx-6-connectx-7-and-connectx-8-nics
  Fwupd 2.0.15 Linux firmware updater is now available for download with support for the NVIDIA ConnectX-6, ConnectX-7 and ConnectX-8 NICs and other changes.
The post Fwupd 2.0.15 Adds Support for NVIDIA ConnectX-6, ConnectX-7 and ConnectX-8 NICs appeared first on 9to5Linux - do not reproduce this article without permission. This RSS feed is intended for readers, not scrapers.
👉@sysadminoff
https://9to5linux.com/fwupd-2-0-15-adds-support-for-nvidia-connectx-6-connectx-7-and-connectx-8-nics
📰 Fwupd 2.0.15 Adds Support for NVIDIA ConnectX-6, ConnectX-7 and ConnectX-8 NICs
Fwupd 2.0.15 Linux firmware updater is now available for download with support for the NVIDIA ConnectX-6, ConnectX-7 and ConnectX-8 NICs and other changes.
🔗 Source:
👉@sysadminoff
https://9to5linux.com/fwupd-2-0-15-adds-support-for-nvidia-connectx-6-connectx-7-and-connectx-8-nics
  
  Fwupd 2.0.15 Linux firmware updater is now available for download with support for the NVIDIA ConnectX-6, ConnectX-7 and ConnectX-8 NICs and other changes.
🔗 Source:
👉@sysadminoff
https://9to5linux.com/fwupd-2-0-15-adds-support-for-nvidia-connectx-6-connectx-7-and-connectx-8-nics
9to5Linux
  
  Fwupd 2.0.15 Adds Support for NVIDIA ConnectX-6, ConnectX-7 and ConnectX-8 NICs - 9to5Linux
  Fwupd 2.0.15 Linux firmware updater is now available for download with support for the NVIDIA ConnectX-6, ConnectX-7 and ConnectX-8 NICs.
  Ubuntu 25.10 Switches to Dracut by Default
Ubuntu’s developers have been given the green light to make Dracut default in Ubuntu 25.10, a foundational change to the way Ubuntu boots that was planned for this development cycle but had missed feature freeze. While the early stages of Ubuntu’s boot process aren’t super interesting (to most of us), this system is what brings up the standard Ubuntu desktop experience we all use. It’s important that the boot process is well-oiled, modern and works as best it can. Hence the switch to dracut in Ubuntu 25.10. With a Feature Freeze Exception granted, the change has been actioned in Ubuntu […]
You're reading Ubuntu 25.10 Switches to Dracut by Default, a blog post from OMG! Ubuntu. Do not reproduce elsewhere without permission.
👉@sysadminoff
https://www.omgubuntu.co.uk/2025/09/ubuntu-25-10-switches-to-dracut-by-default
  Ubuntu’s developers have been given the green light to make Dracut default in Ubuntu 25.10, a foundational change to the way Ubuntu boots that was planned for this development cycle but had missed feature freeze. While the early stages of Ubuntu’s boot process aren’t super interesting (to most of us), this system is what brings up the standard Ubuntu desktop experience we all use. It’s important that the boot process is well-oiled, modern and works as best it can. Hence the switch to dracut in Ubuntu 25.10. With a Feature Freeze Exception granted, the change has been actioned in Ubuntu […]
You're reading Ubuntu 25.10 Switches to Dracut by Default, a blog post from OMG! Ubuntu. Do not reproduce elsewhere without permission.
👉@sysadminoff
https://www.omgubuntu.co.uk/2025/09/ubuntu-25-10-switches-to-dracut-by-default
📰 Ubuntu 25.10 Switches to Dracut by Default
Ubuntu’s developers have been given the green light to make Dracut default in Ubuntu 25.10, a foundational change to the way Ubuntu boots that was planned for this development cycle but had missed feature freeze. While the early stages of Ubuntu’s boot process aren’t super interesting (to most of us), this system is what brings up the standard Ubuntu desktop experience we all use.
🔗 Source:
👉@sysadminoff
https://www.omgubuntu.co.uk/2025/09/ubuntu-25-10-switches-to-dracut-by-default
  
  Ubuntu’s developers have been given the green light to make Dracut default in Ubuntu 25.10, a foundational change to the way Ubuntu boots that was planned for this development cycle but had missed feature freeze. While the early stages of Ubuntu’s boot process aren’t super interesting (to most of us), this system is what brings up the standard Ubuntu desktop experience we all use.
🔗 Source:
👉@sysadminoff
https://www.omgubuntu.co.uk/2025/09/ubuntu-25-10-switches-to-dracut-by-default
OMG! Ubuntu
  
  Ubuntu 25.10 Switches to Dracut by Default
  Ubuntu 25.10 daily builds switch to Dracut by default, after Feature Freeze Exception granted to replace initramfs-tools for a more modern boot process.
  📰 openSUSE’s Agama Installer 17 Released with UI Improvements
openSUSE's new Agama installer v17 brings improved storage UI, better network handling, and new JSON options.
🔗 Source:
👉@sysadminoff
https://linuxiac.com/opensuse-agama-installer-17-released-with-ui-improvements/
  
  openSUSE's new Agama installer v17 brings improved storage UI, better network handling, and new JSON options.
🔗 Source:
👉@sysadminoff
https://linuxiac.com/opensuse-agama-installer-17-released-with-ui-improvements/
Linuxiac
  
  openSUSE's Agama Installer 17 Released with UI Improvements
  openSUSE's new Agama installer v17 brings improved storage UI, better network handling, and new JSON options.
  В Ubuntu 25.10 по умолчанию будет задействован Dracut
В выпуске Ubuntu 25.10, релиз которого намечен на 9 октября, для формирования образов начального RAM-диска (initrd) утверждено использование по умолчанию инструментария Dracut вместо пакета initramfs-tools, развитие которого в последние годы приостановилось и ограничивается работой по сопровождению. Так как разработка выпуска 25.10 c середины августа находится на стадии заморозки, не допускающей добавления новой функциональности, для перехода на Dracut командой, отвечающей за выпуск релизов, предоставлено исключение. В настоящее время пакет initramfs-tools уже заменён на dracut в мета-пакетах.
👉@sysadminoff
https://www.opennet.ru/opennews/art.shtml?num=63860
  
  В выпуске Ubuntu 25.10, релиз которого намечен на 9 октября, для формирования образов начального RAM-диска (initrd) утверждено использование по умолчанию инструментария Dracut вместо пакета initramfs-tools, развитие которого в последние годы приостановилось и ограничивается работой по сопровождению. Так как разработка выпуска 25.10 c середины августа находится на стадии заморозки, не допускающей добавления новой функциональности, для перехода на Dracut командой, отвечающей за выпуск релизов, предоставлено исключение. В настоящее время пакет initramfs-tools уже заменён на dracut в мета-пакетах.
👉@sysadminoff
https://www.opennet.ru/opennews/art.shtml?num=63860
www.opennet.ru
  
  В Ubuntu 25.10 по умолчанию будет задействован Dracut
  В выпуске Ubuntu 25.10, релиз которого намечен на 9 октября, для формирования образов начального RAM-диска (initrd) утверждено использование по умолчанию инструментария Dracut вместо пакета initramfs-tools, развитие которого в последние годы приостановилось…
  В пакетах с ядром для openSUSE отключена поддержка BCacheFS
Разработчики openSUSE объявили об отключении файловой системы BCacheFS в пакетах с ядром Linux. В качестве причины называется присвоение данной ФС в основном ядре статуса внешнего сопровождения, подразумевающего прекращение приёма изменений для Bcachefs в основной состав ядра при сохранении данной ФС в кодовой базе ядра. Своими силами разработчики openSUSE не намерены бэкпортировать в дистрибутивный пакет с ядром патчи из ветки ядра от проекта BCacheFS.
👉@sysadminoff
https://www.opennet.ru/opennews/art.shtml?num=63861
  
  Разработчики openSUSE объявили об отключении файловой системы BCacheFS в пакетах с ядром Linux. В качестве причины называется присвоение данной ФС в основном ядре статуса внешнего сопровождения, подразумевающего прекращение приёма изменений для Bcachefs в основной состав ядра при сохранении данной ФС в кодовой базе ядра. Своими силами разработчики openSUSE не намерены бэкпортировать в дистрибутивный пакет с ядром патчи из ветки ядра от проекта BCacheFS.
👉@sysadminoff
https://www.opennet.ru/opennews/art.shtml?num=63861
www.opennet.ru
  
  В пакетах с ядром для openSUSE отключена поддержка BCacheFS
  Разработчики openSUSE объявили об отключении файловой системы BCacheFS в пакетах с ядром Linux. В качестве причины называется присвоение данной ФС в основном ядре статуса внешнего сопровождения, подразумевающего прекращение приёма изменений для Bcachefs в…
  📰 5 projects you can do for much cheaper with an ESP32 than a Raspberry Pi
Why spend extra on a Raspberry Pi when you can build these cool projects with an ESP32?
🔗 Source:
👉@sysadminoff
https://www.xda-developers.com/projects-you-can-do-for-much-cheaper-with-an-esp32/
  
  Why spend extra on a Raspberry Pi when you can build these cool projects with an ESP32?
🔗 Source:
👉@sysadminoff
https://www.xda-developers.com/projects-you-can-do-for-much-cheaper-with-an-esp32/
XDA
  
  5 projects you can do for much cheaper with an ESP32 than a Raspberry Pi
  Why spend extra on a Raspberry Pi when you can build these cool projects with an ESP32?