CRDROID bootanimation - flash this module in magisk to use it
DO NOT USE IF:
1. your bootanimation not in (/system/product/media/bootanimation.zip)
2. useing OneUI (uses QMG files)

Elixir project bootanimation - flash this module in magisk to use it
DO NOT USE IF:
1. your bootanimation not in (/system/product/media/bootanimation.zip)
2. useing OneUI (uses QMG files)

EvolutionX os bootanimation - flash this module in magisk to use it
DO NOT USE IF:
1. your bootanimation not in (/system/product/media/bootanimation.zip)
2. useing OneUI (uses QMG files)

google bootanimation - flash this module in magisk to use it
DO NOT USE IF:
1. your bootanimation not in (/system/product/media/bootanimation.zip)
2. useing OneUI (uses QMG files)

HorizonDroid bootanimation - flash this module in magisk to use it
DO NOT USE IF:
1. your bootanimation not in (/system/product/media/bootanimation.zip)
2. useing OneUI (uses QMG files)

lineageos bootanimation - flash this module in magisk to use it
DO NOT USE IF:
1. your bootanimation not in (/system/product/media/bootanimation.zip)
2. useing OneUI (uses QMG files)

miku ui bootanimation - flash this module in magisk to use it
DO NOT USE IF:
1. your bootanimation not in (/system/product/media/bootanimation.zip)
2. useing OneUI (uses QMG files)

pixelOS bootanimation - flash this module in magisk to use it
DO NOT USE IF:
1. your bootanimation not in (/system/product/media/bootanimation.zip)
2. useing OneUI (uses QMG files)

this bootanimation files for devices have bootanimation in path: /system/media/bootanimation
that is the same of above but for this older devices
How to use:
- flash this module in magisk to use it
DO NOT USE IF:
1. your bootanimation not in (/system/media/bootanimation.zip)
2. useing OneUI (uses QMG files)

How to root samsung device with magisk

I did a youtube video but it is arabic and may have some mistacks (https://youtu.be/SJWXLCGuhKE)
Before proceeding, please acknowledge that:
1. Installing Magisk WILL trip your Knox Warranty Bit, this action is not reversible in any way.
2. Installing Magisk for the first time REQUIRES a full data wipe (this is NOT counting the data wipe when unlocking bootloader). Please make a backup your data.

Flashing Tools
1. Samsung Odin3 (Windows only) (requires Samsung USB Drivers)
2. Samsung Odin4 (Linux only)
3. Heimdall (or Grimler’s fork)

Requirements
To verify whether or not Magisk can be installed in your Samsung device, you first must check the OEM Lock and KnoxGuard (RMM) status, to do so boot your device in Download mode with its key combo.

Possible OEM Lock values are the following:
- ON (L): fully locked.
- ON (U): bootloader locked, OEM unlocking enabled.
- OFF (U): fully unlocked.

To unlock your bootloader, follow the instructions below. If no OEM Lock value is shown in Download mode, your device is probably not unlockable due to market limitations (USA/Canada devices).

Possible KnoxGuard values are the following:
- Active, Locked: your device has been remotely locked by your telecom operator or your insurance company.
- Prenormal: your device is temporarily locked, reaching 168h of uptime should trigger unlock.
- Checking, Completed, Broken: your device is unlocked.

Having KnoxGuard active will prevent you from installing/running Magisk regardless of your bootloader lock state.
Unlocking the bootloader

How to unlock my samsung device?
1. Allow bootloader unlocking in Developer options → OEM unlocking
2. Reboot to download mode: power off your device and press the download mode key combo for your device
3. Long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
4. Go through the initial setup. Skip through all the steps since data will be wiped again in later steps. Connect the device to Internet during the setup.
5. Enable developer options, and confirm that the OEM unlocking option exists and is grayed out. This means KnoxGuard hasn’t locked your device.
6. Your bootloader now accepts unofficial images in download mode

Instructions
1. Download the latest firmware package for your device, you can use one of the tools below to download it directly from Samsung servers:
- samfw.com
- SamFirm.NET, samfirm.js
- Frija
- Samloader
- Bifrost
2. Unzip the firmware and copy the AP tar file to your device. It is normally named as AP_[device_model_sw_ver].tar.md5
3. Press the Install button in the Magisk card.
* If your device does NOT have boot ramdisk, check the “Recovery Mode” option
5. Choose “Select and Patch a File” in method, and select the AP tar file
6. Start the installation, and copy the patched tar file to your PC using ADB:

adb pull /sdcard/Download/magisk_patched_[random_strings].tar

* DO NOT USE MTP as it is known to corrupt large files.
7. Reboot to download mode. Open Odin on your PC, and flash magisk_patched.tar as AP, together with BL, CP, and CSC (NOT HOME_CSC because we want to wipe data) from the original firmware.
8. Your device should reboot automatically once Odin finished flashing. Agree to do a factory reset if asked.
9. If your device does NOT have boot ramdisk, reboot to recovery now to enable Magisk (reason stated in Magisk in Recovery).
10. Install the Magisk app you’ve already downloaded and launch the app. It should show a dialog asking for additional setup.
11. Let the app do its job and automatically reboot the device. Voila!

source: Magisk Documentation

MiniTool Partition Wizard unlocked bootable iso
flash this tool into your pendrive and boot it
you will be able to edit every thing in you disks, change file system and restore data