Sonoma 14.8.8 Update
https://redd.it/1va1j3y
@r_hackintosh

Daily agenda workspace - yui

A beautiful agenda workspace for people working in terminal

https://github.com/steamacc063-dot/yui-daily

https://redd.it/1vajtmb
@r_hackintosh

mac 装opencore 后，因为太卡，听从chatgtp 建议修改 EFI/OC/config.plist 配置参数，现在进不了系统了

mac 装opencore 后，因为太卡，听从AI 建议修改 EFI/OC/config.plist 配置参数，现在进不了系统了, 修改config.plist 参数 DeviceProperties └── Add └── PciRoot(0x0)/Pci(0x2,0x0) └── AAPL,ig-platform-id = 06002616 ，现在进不了系统了，也识别不到内置的ssd 硬盘了，后面我买了一个 ssd 转usb 硬盘盒子，也识别不到ssd 硬盘，不知道是什么原因现在




https://redd.it/1vakodg
@r_hackintosh

EFI funzionante... che non funziona più.
https://redd.it/1v9ymjs
@r_hackintosh

Can somebody help me?
https://redd.it/1vaozcd
@r_hackintosh

Bluetooth Low Energy doesn’t work

https://redd.it/1vaqzui
@r_hackintosh

macOS Ventura isn't compatible with this Mac

I burned a .raw image of macOS Ventura on my USB using Balena etcher, the replace the opcore efi with the USB efi and booted into recovery mode.

I tried to install it but I got the compatible error.

https://redd.it/1vas5uj
@r_hackintosh

HP EliteDesk 800 G2 SFF (i5-6600, HD 530) - macOS Recovery always hangs, keyboard loses power, monitor enters power saving (Tahoe & Sequoia)

https://redd.it/1varr9u
@r_hackintosh

HP 255 G8 (Ryzen 3 5300U / SK Hynix SSD) – Constant IONVMeFamily Kernel Panic on macOS Sonoma install (OpenCore 1.0.7)

Hey everyone

I'm currently trying to install macOS Sonoma on my laptop using an OpenCore 1.0.7 EFI generated via RapidEFI, but I am completely stuck on a persistent IONVMeFamily Kernel Panic right during the verbose boot phase.

My Specs:Laptop:

\-HP 255 G8CPU: AMD Ryzen 3 5300U (4 Cores / 8 Threads, Zen 2 Lucienne)

RAM: 8GB

Storage: Stock SK Hynix NVMe SSD (512GB)

Graphics: Radeon Vega 6 (using NootedRed.kext)

The Issue:No matter what I do, the verbose screen consistently freezes and crashes with a panic in backtrace related to com.apple.iokit.IONVMeFamily.Under

the panic trace, the boot loader displays: Mac OS version: Not yet set.

What I have already tried in config.plist:

1.Upgraded OpenCore to 1.0.7 and synchronized all AMD Kernel Patches for 4 cores (B8 04 00 00 00 00).

2.Enabled NVMeFix.kext (v1.1.3).

3Disabled AMDRyzenCPUPowerManagement.kext and SMCAMDProcessor.kext to avoid power management conflicts during setup.

4.Set SetApfsTrimTimeout to 0 under Kernel -> Quirks to disable the Trim timeout check.

5.Enabled ThirdPartyDrives under Kernel -> Quirks.

6.Removed -wegnoegpu from boot-args.

7.Cleaned up conflicting trackpad/battery kexts (VoodooI2C, VoodooPS2Controller, SMCBatteryManager are all temporarily disabled, using a USB mouse).

8.Always performing a Reset NVRAM before every boot attempt.

Despite all these fixes, IONVMeFamily still panics at the exact same spot. I suspect this stock SK Hynix SSD controller (likely BC711/PC711) is hardware-incompatible with Sonoma's strict storage drivers.

Has anyone successfully bypassed the SK Hynix drive panic on an AMD laptop, or is my only option to downgrade to macOS Monterey where the NVMe drivers are less strict? Would using boot-args like -ionvmems=1 or ionvme=0 to completely hide the drive and installing to an external storage device work?

Any help or advice would be greatly appreciated! Thanks in advance.

https://redd.it/1vazst5
@r_hackintosh

Why is tahoe missing
https://dortania.github.io/OpenCore-Install-Guide/installer-guide/windows-install.html#downloading-macos

https://redd.it/1vb22u3
@r_hackintosh

Need help installing sequoia

I made it to the recovery section but I can't actually install it because it requires internet connection thought I think I have the right kexts.
My specs:
Intel i5-4200M
Intel HD Graphics 4600 + AMD Radeon HD 8750M
Internet - Intel I217-LM

I tried using ethernet, it doesn't work, also if it's useful I have a tl-wn23n WiFi USB adapter.

https://redd.it/1vb1mrj
@r_hackintosh

upgrades

hi guys i jus purchased an apple mac pro 5.1 its has 2 x 2.66 GHz 6 Core Intel  Processors, can i upgrade these to Intel Xeon X5690 3.46GHz 6.4GT/s 12MB 6 Core 1333GHz SLBVX CPU

https://redd.it/1vazpij
@r_hackintosh

Hackmate v3

stop scrolling if u have a spare usb and 10 minutes, this one might save u a weekend

# HackMate v3 is out — free, open source hackintosh EFI builder

for anyone who hasn't seen this before: HackMate is a tool that builds u a complete, bootable OpenCore USB for hackintosh, just by scanning ur actual hardware. no manual config.plist editing, no hunting down kexts one by one, no memorizing macrecovery commands. pick ur macOS version, plug in a usb, hit go.

not a beast tool or distro — it automates the dortania guide steps using the same tools they recommend (macrecovery, SSDTTime, acidanthera kexts straight from GitHub releases). macOS comes directly from apple. nothing is patched or modified. it's the same process u'd do by hand, just without the 40 tabs open and the 3am "wait why won't this boot" spiral.

works on windows, linux, and macos as the host — doesn't matter what ur building from. windows users get a standalone HackMate.exe, no python/setup needed.

re: the exe getting flagged — yeah, some AV engines and a couple vendors on VirusTotal will throw a false positive on it. that's PyInstaller-packed python binaries in general, not this program specifically — same thing happens to a ton of legit open source tools built this way. source is fully public, build it yourself if u don't trust a random exe (fair honestly), or check the actual VirusTotal breakdown urself instead of just the "flagged" count.

## what's new since v2.5

this was a big one, mostly diagnosed from real boot failures people posted in the discord:

- OpenCore now runs in DEBUG mode by default — means when a build panics, hackmate's hardware db actually gets the real pre-panic boot log instead of nothing. every hardware field, wifi kext choice, macOS version, and the full efi-gen log gets attached (opt-in, obviously)
- fixed a silent SSDT-PLUG bug — some firmware defines cpu cores as ACPI0007 devices instead of the old-school Processor() objects. hackmate was generating the wrong ssdt type for those boards and it'd fail silently instead of erroring, which meant broken cpu power management with zero indication why. now it just tells u straight up when it can't safely generate one instead of guessing
- SSDT-USBX was missing from every desktop build — found this from a real rebuild, not speculation. fixed
- XHCI-unsupported.kext now checks chipset, not just cpu gen — h370/b360/h310/x79/x99 boards need it regardless of what cpu's in there, wasn't catching those before
- AppleXcpmExtraMsrs quirk — was hardcoded off, should be on for pentium/celeron/xeon/HEDT-class chips. fixed
- dual-GPU systems get a picker now — if u've got two gpus, hackmate asks which one to actually use instead of guessing and possibly picking the one that'll give u zero video output
- real realtek codec detection on windows — used to just say "realtek audio," now it pulls the actual alc model so u get the right audio kext config instead of a generic guess
- fixed kaby lake laptops getting the wrong smbios, dual discrete-gpu rigs losing their second card, and a legacy/pre-2015 hardware audit pass
- the bundled acpi fallback files were actually missing from the compiled .exe — packaging bug, not a logic bug, fixed. if ur build kept failing to generate ssdts with no real error, this was probably why
- also fixed a boot hang caused by a corrupted driver download with zero integrity check on it — added retries + validation so a bad download gets caught and retried instead of silently bricking the boot

full changelog + every release note: github releases page

## links

- github / source
- discord (support, bug reports, feature requests)

if ur build does anything weird, drop it in the discord — half the fixes in this update came straight from people posting their actual boot logs there, not guesswork. that's genuinely the fastest way to get it looked

at.


https://redd.it/1vb5te7
@r_hackintosh

[SUCCESS] 4090 accelerated on macOS Ventura
https://redd.it/1vba4uh
@r_hackintosh

RDNA 3 Support

Hi all, I recently bought a new laptop. I have a question about its compatibility for hackintosh. Its processor is AMD AI 5 330 and it only have a integrated GPU which AMD Radeon™ 820M. As far I searched it "belong" to RDNA 3.

Is there any way to get macOS working on this GPU ? As far I read the chances are very low, but still does any body have any idea?
Also what is reims-vgpu ? I read about it in a post in this community this morning can anyone explain what it is ? Here is the github link of that https://github.com/steelbrain/reims-vgpu

I think its some kind of "tool" to get GPU acceleration in VM ? Is that what it is and can I use it with my CPU and GPU ?



https://redd.it/1vbf2om
@r_hackintosh

Can i get a windows laptop and crack mac os in it?

My goal is to be able to use Logic Pro, which is only available on mac. However I'm thinking if I'll buy a windows laptop and crack mac OS in it, that way I use mac os in a separate profile and windows in the other, I can use logic without having to miss out on stuff like gaming, which is impossible on mac.

Is it possible to do this? What specs would be ideal?

https://redd.it/1vbj7f7
@r_hackintosh

MacOS Sonoma on i7 4th gen
https://redd.it/1vbtg1p
@r_hackintosh

Speaker works but mic doesn't, or vice versa.

So guys, I've fixed it and here's the solution:

So the condition was, speakers were working fine but mic wasn't receiving any sound, it only received only for a bit like a sec and again stopped working when Siri or voice memo was activated. These method can work on both condition where mic and speaker both doesn't work or one works but other doesn't.

First thing as usual, you should search for your internal audio chip model by giving your pc motherboard or laptop model on Google and then go to this website: https://github.com/acidanthera/applealc/wiki/supported-codecs

And search for your layout ID. Take a photo or screenshot of it whatever you are comfortable with and try those all layout IDs.

Use OCAuxilaryTools as it has simple UI, go to "DP" (at left panel) then in PciRoot(0x0)/Pci(0x1b,0x0) and at right side, there will be "layout-id" with data type "Number" with whatever value is there. If it doesn't exist, it is maybe in different list of PCIList or if you can't find it anywhere, just create it in PciRoot(0x0)/Pci(0x1b,0x0).

Now, test all those layout IDs that you got from the website I told earlier in the layout-id value by double clicking it and saving it, restart your machine after each layout change and don't forget to reset NVRAM.

If you get lucky, you'll get both mic and speaker working. If not, go to this second method:

For this second method, you should have Windows as another OS or any other Windows laptop or PC. Download "Opencore simplify main" from GitHub, run the .bat file from the folder, proceed with the creation of EFI making. At the layout ID selection, there will be list of layouts for your sound card along with laptop/motherboard model. Take a photo of it, go to ChatGPT or any deep thinking AI, tell it to tell the most closer laptop/motherboard model from the list to your laptop model, also don't forget it to tell it your laptop/motherboard model too. Select and give the layout ID of the selected laptop/motherboard in the EFI layout ID selection. Complete your EFI, copy it to a pendrive, boot into your mac, mount your EFI drive, copy that EFI from your pendrive in the EFI folder, remember to copy it inside the EFI folder not outside, select "replace" when prompted, don't hit anything else. After copying, restart your mac, and reset your NVRAM. You should get your mic and speaker working again :)

If not, comment here, I'll look into your problem.

https://redd.it/1vbt9gg
@r_hackintosh

My New Cheese Grater

https://redd.it/1vbxc9r
@r_hackintosh

USB 3.0 devices not detected by USBmap tool

Hello!

I need some help because I cannot get macOS 26 to see my USB 3.0 devices no matter how hard I try.

My setup is an ASRock b460m-HDV with 4 USB 3.1 and 2 USB 2.0 in the back, and a hub in the front with one USB 2.0 and one USB 3.0 port. They are all Type A ports.

I have tried using USBToolBox on Windows, where it does see both the USB 2.0/3.0 companions and I created a usb map from there. Every single one is accounted for and labeled as Type 3 (USB 3 Type A) and only 14 ports are enabled.

When I apply this kext, my macOS side is able to see any USB 2.0 device, and USB 3.0 devices only work in the 2.0 slots, performing at 2.0. If I plug USB 3.0 devices into any of my other ports they are ignored completely.

If I just map them all as USB 2.0 slots, I can use any device on any of the ports but obviously only at 2.0 performance, which is where I'm at with it right now until I figure out how to get it to acknowledge the 3.0 ports.

XhciPortLimit is disabled, I have no other USB-related kexts.



I've tried using the dummy kext and USBmap.command tool and disabling the ones I already know, and in that tool, even when I have only the higher number ports enabled that windows says are the 3.0 counterparts, the tool and macOS don't see the USB device at all.


Is there ANYTHING else I can try? Am I missing something super obvious? Let me know if you need to see anything from my config. Thank you!

https://redd.it/1vbwsu2
@r_hackintosh