https://t.iss.one/baste_pickle/92 Join them

Build relationships at the farmer’s market, or local farm stand. Chances are, there’s one in your area.

If you can manage to not be a spaz for long enough to hold-down a conversation with a stranger, these people have a lot to teach you. Now is the time to start, in the slow/off-season.

- Ask them about what they grow, or what type of animals that they raise.

- Buy something (their time isn’t free). Don’t be a Jew. Spend a little, and don’t waste their time. Become a repeat customer.

- Offer to lend a hand on their farm, if they need it. Even if it’s one day, and for free, the skill you learn will be invaluable. Oftentimes, they will pay you anyway, usually in produce or meat.

- If there are other customers, be respectful and don’t hold-up too much of their time.

- Ask questions! Let them know that you’re interested in learning, and you may find someone willing to teach you something.

- Realize that this isn’t your time to drop crime statistics, or to start naming. You’re there to learn. And if they are able to give you a little hands-on experience, don’t be a lazy faggot. You may very-well be way out of your comfort zone. Embrace it, and better yourself.

- If you play your cards right, you will make a valuable contact for your future endeavors. These people may very-well be willing to sell to you at a discount, or in bulk. They may also offer you products or deals that aren’t available to other customers. Hell, they may even be willing to set you up with
excess tools or supplies from their operation, to help you get started.

YouTube and Telegram are great for information, but tangible relationships and experience are priceless.

#Supplies #Personal

"How to *actually* jump/bump start a vehicle."

1.make sure the transmission is in park or clutch is depressed and in neutral 2.check for loose or damaged battery and connections
3.get jumper cables, make sure clamps are not touching
4.start donor vehicle
5.ensure battery voltage and polarity of donor and dead vehicle are the same
6.attach one end positive (red) clamp to donor battery positive
7.attach same end negative (black) clamp to donor chassis or battery negative
8.attach other end positive (red) clamp to dead vehicle battery positive
9.attach other end negative (black) clamp to dead vehicle battery negative
10. allow a few minutes for donor vehicle to charge dead vehicle
11. start dead vehicle
12. disconnect negative (black) clamp from dead vehicle chassis
13. disconnect positive (red) clamp from dead vehicle
14. disconnect positive and negative clamps from donor vehicle
15. high five your adoring frenemies!

#DIY

https://youtu.be/JGHf7b2DhJY

We are in the twilight hours now. You should have already stocked up on food, now finish getting your seeds (potatoes and grains are highest priority), any garden needs you have. Get your water storage squared away while you're at it. If you don't have at least 3 months food, you will at the very least be forced to pay for drastically overpriced food and come in contact with infected just to get meager rationed food. At worst you will starve to death.

For "raider" types out there, I've never seen someone with food storage that didn't also have rifles and plenty of ammunition. No such thing as an anti gun prepper. And for those who plan on gardening, without a small field of potatoes, corn, beans, or wheat; you will starve. Every possible square foot should be filled with high calorie foods. You need to actually research and calculate. Also consider canning needs. For those of you thinking you will hunt... During the great depression deer were almost driven to extinction, and the population was 1/4 it is now, and there was much more undeveloped land for deer to forage (higher deer population).

If by "panic" you mean prepare for a great depression, epidemic, and famine, then yes, the time to panic was when CNN was telling you China was entirely shut down for "it's just the flu bro". As in two months ago. In a week or two leaving your home and going anywhere to buy goods in crowded places will automatically guarantee you WILL catch it. And you WILL give it to your family, and you WILL be forced to see first hand if the government has been lying that somehow only boomers die from this.

For those of you who don't know what it will be like, either starvation, dehydration, or CV will cause the same thoughts to run through your head. At first you will ignore it. You will bury yourself in your phone or tv. Then things will worsen. "It's alright, things will be better tomorrow". But it doesn't. You'll lay there dying slowly thinking someone will come save you or your family. You'll frantically call or message friends or chain out cries for water/food/medical Care on social media. And the utterly useless "thoughts and prayers" will roll in.

And one last hope will come that "oh there's gov handing out food/water/medical care over on this street!". And you will rush there (if you even can) only to find out that thousands showed up but only the first 100 got it. Fights, violence, and hopelessness will pierce through that thin veneer of civilization you still believed in.

So you will go back home, and consider prayer, because only God can help you and your family. And perhaps he answers. The Bible says he will do these things to bring his peoples attention back to him.

Or maybe you become a statistic, like the millions who die in war, famines, or disease throughout history.

Or you could get off your ass and move. Get to work. There's still seed potatoes and garden hoes on shelves. There's even still seeds, soil, tarps, chickens available. There's still massive 50lb bags of cracked corn for 10$ that could keep a person alive for almost two months. If you or your family die, it's your fault and no one else's.

Nasty Chink Plague Contamination Guide #Coronavirus

1. Decontamination Space

2. Sterelization Tools

3. Sterelization Routine.

https://t.iss.one/boogiewoogieshitmayne/9238

#Survival How to Forecast Weather without Gadgets

-Clouds
-Humidity
-Animals
-Rainbow
-Air
-Moon
-Wind

https://t.iss.one/boogiewoogieshitmayne/9382

https://t.iss.one/boogiewoogieshitmayne/9387

Spiritual Preparation => Emotional and Group Support => Situational Assestment => Basic Necesities => Financial Wealth.

#General

https://t.iss.one/baste_pickle/319

Knowing how to make a basic tripod will help you with several upcoming walkthroughs. This one doesn’t really warrant a step-by-step, as this image fairly-well sums it up. Hold on to this one, and practice it. It may seem basic, but it’s a skill worth mastering.

Construction lashings and their use when building structures. https://www.wildernessarena.com/skills/knots-and-rope/construction-lashings

Three basic types of Lashings

-Square Lashing (used when spars tend to slide over each other)

-Diagonal Lashing (use when spars tend to spring away from each other)

-Shear Lashing (use when spars have to share a load)

Other types of lashings

-Japanese Square Lashing

-Filipino Diagonal Lashing

-Gin Tripod Lashing

-West Country Shear Lashing

Structures

-Simple Tower

-Anchors

-Trestle

#Survival

https://www.youtube.com/watch?v=pei37NKKAkE

Run Home Drills!

1. Complete planned Drill, you already talked about it.

2. Suprise Drill, only the cordinator knows that its a drill.

3. Blalck-out Drill, no electrictiy.

4. Camping the most primitve way.

5. Nigh time Drill. Teach yourself to navigate your home in total darkness.

#General #Defense

Remember having trust in your government? Remember having trust in your local law enforcement? Remember thinking that they would protect you from bad things happening to you and your family? They just left you on your own to defend yourself and released violent prisoners into the streets. This is your government right now. Take a good look.

Does it look like they give a damn if you live or die?

This is the same government that wants to inject you with what they claim is a vaccine. Do you still trust them enough to allow it?

How to harvest yeast from beer:
Yeast shipments are a month out in most places. Here's how you can capture your own yeast of likely superior quality from beer you can buy at the store.

1. Find an unfiltered beer. It needs to be unfiltered so that the yeast hasn’t been filtered out. There are plenty of unfiltered beers on the market but Bud Light won't work.

2. Refrigerate your bottle or can of beer for one week. Make sure you have a nice slurry on the bottom. Two to three bottles cans will yield better results.

3. Open bottle or can and sanitize the lip with a flame. NOTE: You may also want to spray sanitizer on and around the cap before opening.

4. Gently pour the beer into a glass, leaving the sediment (yeast) in the bottle or can.

5. Swirl the sediment/yeast in the bottle and re-flame the lip.

6. Pour sediment into a StarSan sanitized container.

7. Grow your yeast using a stepped starter – start with 75ML (about 1/3 of a cup) of wort, then let ferment for two to three days. Then add an additional 750ML of wort and let ferment an additional two to three days.

Information from:

https://www.bellsbeer.com/news/how-culture-bell-s-house-yeast-bottle-bell-s-beer

Note: To ferment all you need is a sanitized container, an airlock (home made or store bought), sugar, water, and yeast. A balloon with a hole poked in it can be a decent airlock in a pinch, but there's nothing like a proper bubbler airlock. Basically, you want to make sure nothing from the outside gets in, and the gas generated from the inside gets out. StarSan is the go-to sanitizer but may be sold out most places online (check your local homebrew store) or you can use regular dish-soap making sure it's thoroughly washed out. You need to keep your ale yeast fermenting between 68 and 72F, and cooler is better than warmer (it just takes longer). Lager yeast ferments between 45 and 55F but are outside of the scope of this.

From https://t.iss.one/mhz1488/1073 join them.

#Social Five Six Common Mistakes Prepper Groups Make!

1. Not Clearly defined Hiearchy.

2. To Reveal everything in the first date.

3. No Clear Goals.

4. Bad leadership, bad comunication. Chaotic Chain of Command?

5. Not Defining the new member's role

6. Not Being selective.

https://www.youtube.com/watch?v=B-Ln6lSLYYU

Coronavirus measures could cause global food shortage, UN warns

Exclusive: Protectionist policies and shortage of workers could see problems start within weeks

UN WARNS: GLOBAL FOOD SHORTAGES He gives a good comentary on this topic.

#Coronavirus

https://t.iss.one/boogiewoogieshitmayne/9610

#Survival Footprints Animals

HOW TO MAKE USB CONDOMS

Modern smart devices are power hungry machines that require frequent charging. This problem is usually solved by bringing along portable power chargers that are expensive and bulky. As a solution to the power problem, many public facilities or events are starting to provide booths with USB ports for free charging. However, charging smart devices on unknown / public USB ports will make your device vulnerable to “juice jacking”, which allows unauthorized users access to data on your phone. Additionally, smart devices can be infected with malware through these unidentified USB ports.

The Solution

A “neutered” USB cable that allows the charging current to pass through but physically disabling all forms of data transmission. This essentially blocks out all forms of communication between the smart device and the source of power, regardless whether it is a computer or an adapter plugged into a wall socket. This can be achieved by physically disconnecting the data transmission wires between the device and the source of power. Doing this on a standard USB cable requires some technical knowledge and makes for an unsightly cable. This is where a USB condom comes in. Putting one on at the end of a standard USB cable will block the data transmission lines between the device and the power source.

How is it Made?

Solder the first and fourth pins of the male drive to the female drive and you have a USB condom that works with most devices.
For the device to work with iPhones, you’ll have to include an additional circuit board to fake a voltage charge.

Note: The current design shown above works for all devices, even iPhones!

#Personal

https://www.youtube.com/watch?v=Osg_iFnftN4

Automatic Waterer and Feeder with a bucket and a rubber pan.

#Supplies

https://t.iss.one/boogaloointel/980 (It's from Traditional mom channel, for some reason i can't access to the channel, so i can't give the link )

Sources for Heirloom and Organic Seeds:

https://www.seedsavers.org

https://www.rareseeds.com

https://hudsonvalleyseed.com

https://www.fedcoseeds.com

https://www.johnnyseeds.com

https://www.monticelloshop.org/garden/heirloom-seeds/vegetable-herb-seeds/

“Wholesale”: Larger Packets:
https://www.wholesale.molesseeds.co.uk

#Supplies

How to Make a PVC Bow

I've been basically working on game hunting for quite some time now. It took me some time, but I understood how the use of gun can spoil the potential scope of prey and even attract unnecessary attraction. So I thought what's better than using a classic bow and arrow approach that saves ammo and provides better game hunting opportunities.

Here's how you can make your own hunting bow at home, this is what you're gonna need:-

(1) 5-foot section of 1-inch PVC pipe

(2) 2 1/2-inch sections of 3/4-inch PVC pipe — most hardware stores stock PVC pipe in 5-foot sections; PVC is cheap, and often handy to have around, so don’t hesitate about getting extra footage of it

Sharpie

PVC cutter or hacksaw

Dremel or other rotary tool (optional, but makes it easier)

Hammer or rubber mallet

(1) 5-foot section of military-grade paracord

Duct tape (optional)

Now here's a process that I didn't exactly follow as I had to improvise, but this is the best way ahead I've realised after wasting tons of material experimenting:-

Step 1: Cut PVC

Cut two 2 1/2-inch segments of 3/4-inch PVC pipe. If you have a PVC cutter, use it. It’ll make cleaner cuts and save you time. If you don’t have one, a hacksaw will do just fine. If it leaves ragged edges on your pipe, smooth them down with a bit of sandpaper.

Step 2: Nest the PVC Pipes

Use a hammer or mallet to pound the two smaller pieces of 3/4-inch PVC into each end of your 5-foot length of 1-inch pipe, until they’re flush. These sections will help reinforce the ends of the bow where you’ll attach your paracord.
If you don’t have a mallet, a piece of wood will help distribute the impact from your hammer and reduce the chance of cracking the PVC.

Step 3: Cut the Notches

Mark two lines, about an inch long, opposite each other on each end of your bow — that’s 4 total lines. You’ll use these to guide cuts that will ultimately act as the notches where the string will be tied. Make sure that your marks line up with each other at either end of the bow.
Use a Dremel, or a hacksaw in a pinch, to cut out your notches at either end of the bow. When you’re done, you should have a 1-inch deep cut that’s wide enough to fit your paracord.

Step 4: Tie Knots in Paracord

Now this is gonna be a little tricky but I think what we're gonna do will be way more easier if you know how to tie a Overhand loop Knot. If you don't then follow the instructions following :-
Double the end of a rope or form
a bight anywhere on a line. Tie an Overhand Knot with the doubled rope of the loop that was formed.

Adjust the loop before tightening to make it as small or large as desired

The loop tips should measure about 50” apart.

Step 5: String the Bow

String your bow by slipping one of your loop knots through the notch in one end. Then, bend the bow so that you can stretch the paracord to reach the other end.

Step 6: Finish the Grip

Now you can do whatever you want, Duct tape grips work fine, but hands have kinda roughened up from all the hillbilly so I personally use a badminton racquet towel grip, duct taped at the ends.

If you have any queries, I can add pictures and help you just leave a comment. :D

HAPPY HUNTING #Survival

1.Make sure the battery is the problem
2.take photos and get the group number off the label
3.remove negative terminal
4.remove positive terminal
5.remove hold-downs
6.ensure terminals and leads are clean, wire brush oxides
7.(optional) apply grease to terminals
8. install positive terminal
9. install negative terminal
10.install hold-downs
11. test
12. coat terminals and hood latch with grease.

#DIY

https://youtu.be/IAi4GbRfvhs

https://t.iss.one/PrivSecGoy/34

Services like Telegram require a phone number for verification but giving out your personal phone number is a very risky proposition and a violation of your privacy. All it takes is one wrong move and your number is out in the public eye. It doesn't take long from there to link a phone number to an identity and then to a face.

To avoid all of this I highly recommend none of you use Telegram with your real phone number. There are a million different ways to gain access to another phone number for long enough to validate your Telegram account. Once validated you will never need access to this number again.

Below are some links to places where you could get a throw away phone number for Telegram and other services...

Burner App: https://www.burnerapp.com

Mint SIM: https://www.amazon.com/Mint-Mobile-Starter-Verify-Compatibility/dp/B0786RD524

Google Voice: https://voice.google.com/

Free SMS: https://quackr.io/

Free SMS: https://smsreceivefree.com/

SMS for Bitcoin: https://smsprivacy.org/

#Personal