physwizz A730f (a8+) v2
For OneUI 1.0 (P) also for GSIs

@physwizz

-Samsung securities disabled.
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 208 - 2184
-Little: 208 - 1690
-GPU: 343 - 1300
-GPU thermal and voltage control
-Extended battery life


Installation
https://t.iss.one/physwizz2/454


https://github.com/physwizz?tab=repositories

PHYSWIZZ STUFF

Guides
https://t.iss.one/physwizz2/242

Kernels
https://t.iss.one/physwizz2/240

ROMs & Mods
https://t.iss.one/physwizz2/243

Kernel Building
https://t.iss.one/physwizz2/241

Discussion Group
https://t.iss.one/physwizz3

A12s & m12 resources channel
https://t.iss.one/a127f_res

A127f & M127f development
https://t.iss.one/a12schat

XDA collection
https://forum.xda-developers.com/t/physwizz-collection.4253081/


Projects for physwizz
https://t.iss.one/physwizz2/486

@physwizz
Time Zone: GMT +10

A22 kernel for android 12
Based on a225f
For OneUI 4.1 and for GSIs

-Samsung securities disabled.
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
Lz4 default for zram

Installation
https://t.iss.one/physwizz2/454

Ignore the error message during installation and reboot

WiFi and Bluetooth not working

@physwizz

Kernel
https://github.com/physwizz?tab=repositories

F22 kernel for android 12
Based on E225f
For OneUI 4.1 and for GSIs

-Samsung securities disabled.
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
Lz4 default for zram

Installation
https://t.iss.one/physwizz2/454

Ignore the error message during installation and reboot

WiFi and Bluetooth not working


@physwizz

Kernel
https://github.com/physwizz?tab=repositories

For a22 Android 12

Installing firmware

Note 1: you can't usually install firmware with a lower binary. Binaries can be 1 2 3 4 5 6 7 8 9 A B C D E F usually preceded by S or U (S5 or UA for example)
Note 2: The binary is the 9th digit in your baseband.
Note 3: the baseband can be found at Settings - About phone - Software information
Note4: if you want to revert to a version with a lower binary, just flash AP and CSC. (It sometimes works) or try this method https://xdaforums.com/t/how-to-downgrade-android-version-in-samsung-devices-if-device-is-in-higher-binery.4561665/

Preparation
On your PC
- Firmware: download from one of these sites
https://samfrew.com or 

Fastest
https://samfw.com/

Part A
Unlock Bootloader only if you need to install non standard firmware
https://t.iss.one/physwizz2/181

Part B
1. Connect phone cord to PC
2. To reboot into download mode
- Turn off phone
- Hold down both volume keys
- Plug into computer

3. Flash each part of the firmware into its slot using Odin
BL_xxxxxxx.tar.md5 goes into the BL slot
AP_xxxxxxx.tar.md5 goes into the AP slot
CP_xxxxxxx.tar.md5 goes into the CP slot
CSC_xxxxxx.tar.md5 goes into the CSC slot. (use HOME_CSC if you don't want a factory reset)

4. Factory data reset
5. Wait for the restart
6. Go all the way through the setup process.

Note: you could use this app with a second phone
https://t.iss.one/fdur2021projects/314

@physwizz

physwizz E625
version 2.6
For F62 Android 12 only

For OneUI 4.1
( also works for GSIs)

More CPU governors
Userspace, powersave, performance, shedutil
Optimised for performance
Underclocked for battery
little 182 - 1950
big 377 - 2400
prime 350 - 2730
lz4 as default in zram
Charging bug fixed
write support for max_freq, min_freq, target_freq
GPU thermal from nalas
Improved gpu scaling
GPU 156000-754000 (fully accessible)

Bugs
?

Installation
https://t.iss.one/physwizz2/454

Kernel source code
https://github.com/physwizz?tab=repositories

@physwizz

PHYSWIZZ STUFF

Guides
https://t.iss.one/physwizz2/242

Kernels
https://t.iss.one/physwizz2/240

ROMs & Mods
https://t.iss.one/physwizz2/243

Kernel Building
https://t.iss.one/physwizz2/241

Discussion Group
https://t.iss.one/physwizz3

A12s & m12 resources channel
https://t.iss.one/a127f_res

A127f & M127f development
https://t.iss.one/a12schat

XDA collection
https://forum.xda-developers.com/t/physwizz-collection.4253081/


Projects for physwizz
https://t.iss.one/physwizz2/486

@physwizz
Time Zone: GMT +10

physwizz M625 u2 S v2.6
For M62 Android 12 only

For OneUI 4
( also works for GSIs)

More CPU governors
Userspace, powersave, performance, shedutil
Optimised for performance
Underclocked for battery
little 182 - 1950
big 377 - 2400
prime 520 - 3016
lz4 as default in zram
GPU 156000-754000 (fully accessible)

Bugs
?

Installation
https://t.iss.one/physwizz2/454

Kernel source code
https://github.com/physwizz?tab=repositories

@physwizz

physwizz E625 u2 kernel
version 6.2
For F62 Android 11 only

For OneUI 3.1
( also works for GSIs)

More CPU governors
Userspace, powersave, performance, shedutil
Optimised for performance
Underclocked for battery
little 182 - 1950
big 377 - 2400
prime 520 - 2730
lz4 as default in zram
Charging bug fixed
write support for max_freq, min_freq, target_freq
Mtp for GSIs
Thermal GPU from nalas
Improved gpu scaling
GPU 156000-754000 (fully accessible)


Installation
https://t.iss.one/physwizz2/454


https://t.iss.one/physwizz2/446

Bugs
?


Kernel source code
https://github.com/physwizz?tab=repositories

@physwizz

physwizz F41 S kernel version 2


For OneUI 4.1
( also works for GSIs)

Samsung securities disabled
More CPU governors
Conservative, On-demand, Userspace, powersave, performance, energy_step, shedutil
Optimised for performance
Overclocked for performance
Underclocked for battery
CPU:
Big 728MHz - 2210MHz
Little 403MHz - 2054MHz
lz4 default compression added to zram

Installation
https://t.iss.one/physwizz2/454


Kernel
https://github.com/physwizz?tab=repositories

@physwizz

physwizz A31 S kernel version 1
Binary u1
For OneUI 4
( also works for GSIs)

Samsung securities disabled
Optimised for performance
lz4 default compression added to zram

Installation
https://t.iss.one/physwizz2/454


Kernel
https://github.com/physwizz?tab=repositories

@physwizz

A226B kernel

Built with proton-clang 13


physwizz a226 kernel version 1
Based on a226B s4
For OneUI 3.1 and for GSI (Q or R)

Samsung securities disabled
Optimised for performance
lz4 default compression added to zram


Installation
https://t.iss.one/physwizz2/454

Ignore the error message during installation and reboot


@physwizz

Kernel
https://github.com/physwizz?tab=repositories

PHYSWIZZ STUFF

Guides
https://t.iss.one/physwizz2/242

Kernels
https://t.iss.one/physwizz2/240

ROMs & Mods
https://t.iss.one/physwizz2/243

Kernel Building
https://t.iss.one/physwizz2/241

Discussion Group
https://t.iss.one/physwizz3

A12s & m12 resources channel
https://t.iss.one/a127f_res

A127f & M127f development
https://t.iss.one/a12schat

XDA collection
https://forum.xda-developers.com/t/physwizz-collection.4253081/


Projects for physwizz
https://t.iss.one/physwizz2/486

@physwizz
Time Zone: GMT +10

Installing wizzROMs
(and other custom ROMS)

INSTALL AT YOUR OWN RISK
I AM NOT RESPONSIBLE FOR ANY BRICKED PHONES
But I will help any well-mannered person to recover.

A. Preparation

1. Download the exact firmware (including upgrade date) for your device from https://samfrew.com or https://www.samfirmware.net/ or https://www.full-repair-firmware.com/search?q=A20 or
https://samfw.com/
2. Extract recovery.img

B. Installation

1. Boot into TWRP
2. Backup boot, data, system & vendor on older phones
Or boot, data & super on newer phones
3. Wipe caches, data
4. Install ROM
5. For older phones install dmverity
https://t.iss.one/physwizz2/273
For newer phones
Advanced, terminal and type multidisabler (twice)
If that doesn't work install multidisabler.zip twice
https://t.iss.one/a127f_res/134
6. Reboot directly to recovery from main menu
Note: on some phones you may need to install stock recovery.img into the recovery slot.
7. Reboot to system
8. Wait for welcome screen
9. Go all the way through the setup (never reboot from the welcome screen)

If you have recently installed a kernel containing a custom dtbo.img you need to go back stock dtbo.img from your baseband (not your kernel or your ROM)
Instructions are here
https://t.iss.one/physwizz2/250


Note:
First boot takes a long time (be patient)


C. Removal

Method 1
Reboot to recovery
Restore backup
Reboot

Method 2.
Reboot phone to download mode
Install firmware from odin


@physwizz

physwizz M315f S kernel version 1.5


For OneUI 4.1
( also works for GSIs)

Samsung securities disabled
More CPU governors
Conservative, On-demand, Userspace, powersave, performance, energy_step, shedutil
Optimised for performance
Underclocked for battery
CPU:
Big 728MHz - 2210MHz
Little 403MHz - 2054MHz
lz4 default compression added to zram

Installation
https://t.iss.one/physwizz2/454


Kernel
https://github.com/physwizz?tab=repositories

@physwizz

physwizz M315f S kernel version 3


For OneUI 4.1
( also works for GSIs)

Samsung securities disabled
More CPU governors
Conservative, On-demand, Userspace, powersave, performance, energy_step, shedutil
Optimised for performance
Underclocked for battery
CPU:
Big 832MHz - 2314MHz
Little 403MHz - 2054MHz
lz4 default compression added to zram

Installation
https://t.iss.one/physwizz2/454


Kernel
https://github.com/physwizz?tab=repositories

@physwizz

physwizz F415f S kernel version 3


For OneUI 4.1
( also works for GSIs)

Samsung securities disabled
More CPU governors
Conservative, On-demand, Userspace, powersave, performance, energy_step, shedutil
Optimised for performance
Underclocked for battery
CPU:
Big 832MHz - 2314MHz
Little 403MHz - 2054MHz
lz4 default compression added to zram

Installation
https://t.iss.one/physwizz2/454


Kernel
https://github.com/physwizz?tab=repositories

@physwizz

PHYSWIZZ STUFF

Guides
https://t.iss.one/physwizz2/242

Kernels
https://t.iss.one/physwizz2/240

Kernels by soc
https://t.iss.one/physwizz2/545

ROMs & Mods
https://t.iss.one/physwizz2/243

Kernel Building
https://t.iss.one/physwizz2/241

Discussion Group
https://t.iss.one/physwizz3

A12s & m12 resources channel
https://t.iss.one/a127f_res

A127f & M127f development
https://t.iss.one/a12schat

XDA collection
https://forum.xda-developers.com/t/physwizz-collection.4253081/


Projects for physwizz
https://t.iss.one/physwizz2/486

@physwizz
Time Zone: GMT +10

physwizz F415f S kernel version 3.1


For OneUI 4.1
( also works for GSIs)

Samsung securities disabled
More CPU governors
Conservative, On-demand, Userspace, powersave, performance, energy_step, shedutil
Optimised for performance

CPU:
Big 936 MHz - 2314MHz
Little 403MHz - 2054MHz
lz4 default compression added to zram

Installation
https://t.iss.one/physwizz2/454


Kernel
https://github.com/physwizz?tab=repositories

@physwizz