physwizz kernel a10s
A107m Q binary 4 v2
@physwizz

-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-SE linux enforcing
-Works with Magisk

-Zram with lz4 compression

For Zram
Go to HKtweaks- virtual memory
increase swappiness
choose lz4
increase size
turn on Zram
leave "apply on boot" OFF

Bugs
Rear camera - use gcam
Wifi



https://github.com/physwizz?tab=repositories

physwizz kernel a10s
A107m Q binary 4 v3
@physwizz

-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance, schedutil.
-SE linux enforcing
-Works with Magisk

-Zram with lz4 compression

For Zram
Go to HKtweaks- virtual memory
increase swappiness
choose lz4
increase size
turn on Zram
leave "apply on boot" OFF

Bugs
Rear camera - use gcam
WiFi


https://github.com/physwizz?tab=repositories

physwizz E625 u2 kernel version 5.0c
For F62 only
Updated platform

For OneUI 3.1
( also works for GSIs)

More CPU governors
Userspace, powersave, performance, shedutil
Optimised for performance
Underclocked for battery
little 182 - 1950
big 377 - 2400
prime 350 - 3016
GPU not yet

Bugs
?


Installation

Install kernel from terminal.

1. Download magisk module (magic-flash.zip) from https://github.com/Magisk-Modules-Alt-Repo/magic-flash
2. Install module and reboot.
3. Open terminal.
4. Navigate to folder containing kernel.zip.
5. Type su
6. Type flash kernel_name.zip
7. Reboot

Kernel source
https://github.com/physwizz?tab=repositories

@physwizz

physwizz E625 u2 kernel version 5.1c
For F62 only
Updated platform

For OneUI 3.1
( also works for GSIs)

More CPU governors
Userspace, powersave, performance, shedutil
Optimised for performance
Underclocked for battery
little 182 - 2106
big 377 - 2400
prime 520 - 3016
lz4 as default in zram

Bugs
CPU Overclock doesn't stick


Installation
Method 1
Install kernel from terminal.

1. Download magisk module (magic-flash.zip) from https://github.com/Magisk-Modules-Alt-Repo/magic-flash
2. Install module and reboot.
3. Open terminal.
4. Navigate to folder containing kernel.zip.
5. Type su
6. Type flash kernel_name.zip
7. Reboot

https://t.iss.one/physwizz2/446

Method 2
Install adb tools on pc
Connect to PC
Copy zip file to adb folder on pc
Open terminal on pc
Navigate to adb folder
Type
adb sideload name.zip

Method 3
https://t.iss.one/SamsungGalaxyF62Discussion/13841


Kernel
https://github.com/physwizz?tab=repositories

@physwizz

physwizz M625 u1 kernel version 1c
For M62 only
Updated platform

For OneUI 3.1
( also works for GSIs)

More CPU governors
Userspace, powersave, performance, shedutil
Optimised for performance
Underclocked for battery
little 182 - 2106
big 377 - 2400
prime 520 - 3016
lz4 as default in zram

Bugs
CPU Overclock doesn't stick


Installation
Method 1
Install from Terminal
https://t.iss.one/physwizz2/446

Method 2
Install adb tools on pc
Connect to PC
Copy zip file to adb folder on pc
Open terminal on pc
Navigate to adb folder
Type
adb sideload name.zip

Method 3
Add Image to boot.img
https://t.iss.one/physwizz2/82
and flash boot.tar from Odin


Kernel
https://github.com/physwizz?tab=repositories

@physwizz

physwizz M625 u1 boot.tar
Kernel version 1
For M62 only
Updated platform

For OneUI 3.1
( also works for GSIs)

More CPU governors
Userspace, powersave, performance, shedutil
Optimised for performance
Underclocked for battery
little 182 - 2106
big 377 - 2400
prime 520 - 3016
lz4 as default in zram

Bugs

CPU Overclock doesn't stick

Installation
Instructions:
1.Make sure you have your data backed up and you are in stock Android 11
2. Go to download mode and flash the img in AP section of odin
3. Reboot to stock recovery and factory reset and reboot.

Kernel
https://github.com/physwizz?tab=repositories

@physwizz

Python 2

Some kernels need python2 for building.
If you only have python3 follow this guide.


To Install

open a terminal window

sudo apt-get install pip

sudo -s

root:~# pip install virtualenv

root:~# which python2.7

root:~# which python3

root:~# virtualenv -p /usr/bin/python2.7 Vpy27


root:~# source Vpy27/bin/activate


From then on

sudo -s

root:~# virtualenv -p /usr/bin/python2.7 Vpy27

root:~# source Vpy27/bin/activate

@physwizz

physwizz a12 kernel version 1
Based on a125m U1
Mediatek MT6765 Helio P35

For OneUI 3.1
(May also work for GSIs)
Built with proton-clang 13


Samsung securities disabled
More CPU governors
Optimised for performance
Lz4 is default in zram

Method 1
Install from TWRP.
Ignore the error message


Method 2
Using ADB

Install adb platform tools on pc
Connect to PC
Copy zip file to adb folder on pc
Open terminal on pc
Navigate to adb folder
Type
adb sideload file-name.zip


Kernel
https://github.com/physwizz?tab=repositories

wizzROM Creator magisk module v4.2

DO NOT INSTALL FROM TWRP
Install from magisk or kernelSU

for all Samsung phones

Debloated ROM with Extras
Fixed apps in system/product
Extras:

HKtweaks
SimpleReboot
Root Explorer
Zarchiver
physwizz-2

Thermal throttling removed on some phones

Make sure your OneUI ROM iis running befote you start
Installation
1 Backup system from recovery
2 Install the creator from Magisk
https://t.iss.one/physwizz2/489?single
3 Reboot
4 Enjoy

NOTE: you may still need to delete some apps from the app drawer.

Name your wizzROM (optional)

1. Use a root explorer to navigate to system/build.prop
2. Tap to Edit build.prop like this

ro.build.display.id=<your-name>

3. Tap disk icon to Save & Reboot

Customising wizzROM

Use zarchiver to edit the zip.
Don't unzip.
To stop an app from being debloated just delete it from my zip.
To debloat a new app copy one of my 0 byte apps rename or and add it to the zip.
To add a new app just copy it to my zip

@physwizz

Physwizz kernel a315g/f
Android 11 (R)

Installation
https://t.iss.one/physwizz2/454


Kernel
https://github.com/physwizz?tab=repositories

@physwizz

physwizz kernel a10s
A107m R binary 5 v1
For Android 11 only
@physwizz

-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance, schedutil.
-SE linux enforcing
-Works with Magisk

-Zram with lz4 compression

Installation
Using ADB

Install adb tools on pc
Connect to PC
Copy zip file to adb folder on pc
Open terminal on pc
Navigate to adb folder
Type
adb sideload file-name.zip

Bugs
?

https://github.com/physwizz?tab=repositories

physwizz E625 u2 kernel version 5
For F62 Android 11 only

For OneUI 3.1
( also works for GSIs)

More CPU governors
Userspace, powersave, performance, shedutil
Optimised for performance
Underclocked for battery
little 182 - 1950
big 377 - 2400
prime 350 - 3016
GPU not yet

Bugs
?

Installation
Unzip the .tar file

Instructions:
1.Make sure you have your data backed up and you are in stock build E625FDDU2AVA3
2. Go to download mode and flash the img in AP section of odin (untick auto reboot in odin)
3. Reboot to stock recovery and factory reset and reboot.

Kernel source
https://github.com/physwizz?tab=repositories

@physwizz

physwizz E625 u2 kernel version 5.1b
For F62 only
Updated platform

For OneUI 3.1
( also works for GSIs)

More CPU governors
Userspace, powersave, performance, shedutil
Optimised for performance
Underclocked for battery
little 182 - 2106
big 377 - 2400
prime 520 - 3016
lz4 as default in zram

Bugs
CPU Overclock doesn't stick

Installation
Unzip the .tar file

Instructions:
1.Make sure you have your data backed up and you are in stock build E625FDDU2AVA3
2. Go to download mode and flash the img in AP section of odin (untick auto reboot in odin)
3. Reboot to stock recovery and factory reset and reboot.


Kernel source code
https://github.com/physwizz?tab=repositories

@physwizz

physwizz E625 u2 kernel
version 6.0
For F62 Android 11 only

For OneUI 3.1
( also works for GSIs)

More CPU governors
Userspace, powersave, performance, shedutil
Optimised for performance
Underclocked for battery
little 182 - 1950
big 377 - 2400
prime 520 - 2730
lz4 as default in zram
Charging bug fixed
write support for max_freq, min_freq, target_freq

Bugs
?

Installation
Unzip the .tar file

Instructions:
1.Make sure you have your data backed up and you are in stock build E625FDDU2AVA3
2. Go to download mode and flash the img in AP section of odin (untick auto reboot in odin)
3. Reboot to stock recovery and factory reset and reboot.


Kernel source code
https://github.com/physwizz?tab=repositories

@physwizz

physwizz E625 u2 kernel
version 6.0
For F62 Android 11 only

For OneUI 3.1
( also works for GSIs)

More CPU governors
Userspace, powersave, performance, shedutil
Optimised for performance
Underclocked for battery
little 182 - 1950
big 377 - 2400
prime 520 - 2730
lz4 as default in zram
Charging bug fixed
write support for max_freq, min_freq, target_freq

Bugs
?

Installation

Flash from TWRP

Kernel source code
https://github.com/physwizz?tab=repositories

@physwizz

Installation of twrp

Root using this method
https://t.iss.one/physwizz2/409

Install TWRP
1. Download recovery.img
2. Install TWRP app
3. Install TWRP
4. Choose file to flash.(don't select device)
5. Select recovery.img.
6. Reboot to recovery

Format & Decrypt Data
1. Install Magisk zip
2. Wipe, format data, type YES.
3. Advanced, terminal.
4.Type multidisabler (twice).
If you get an error use multidisabler zip instead.
5.Reboot to recovery
Not just reboot (main menu=>reboot=>recovery)
6. Reboot
7. Go through setup
8. Reboot to recovery
9. Backup boot, data, super

@physwizz

physwizz E625 u2 kernel
version 6.01c
For F62 Android 11 only

For OneUI 3.1
( also works for GSIs)

More CPU governors
Userspace, powersave, performance, shedutil
Optimised for performance
Underclocked for battery
little 442 - 1950
big 377 - 2400
prime 520 - 2730
lz4 as default in zram
Charging bug fixed
write support for max_freq, min_freq, target_freq

Bugs
?

Installation
1. Install kernel from terminal.

1. Download magisk module (magic-flash.zip) from https://github.com/Magisk-Modules-Alt-Repo/magic-flash
2. Install module and reboot.
3. Open terminal.
4. Navigate to folder containing kernel.zip.
5. Type su
6. Type flash kernel_name.zip
7. Reboot

Or
2. Flash from TWRP

Kernel source code
https://github.com/physwizz?tab=repositories

@physwizz

physwizz E625 u2 kernel
version 6.03c
For F62 Android 11 only

For OneUI 3.1
( also works for GSIs)

More CPU governors
Userspace, powersave, performance, shedutil
Optimised for performance
Underclocked for battery
little 182 - 1950
big 377 - 2400
prime 520 - 2730
lz4 as default in zram
Charging bug fixed
write support for max_freq, min_freq, target_freq
Mtp for GSIs

Install from twrp
Or
Install kernel from terminal.

1. Download magisk module (magic-flash.zip) from https://github.com/Magisk-Modules-Alt-Repo/magic-flash
2. Install module and reboot.
3. Open terminal.
4. Navigate to folder containing kernel.zip.
Use
ls to list contents
and
cd to change directories

5. Type su
6. Type flash kernel_name.zip
7. Reboot

https://t.iss.one/physwizz2/446

Bugs
?


Kernel source code
https://github.com/physwizz?tab=repositories

@physwizz

F62 TWRP from @kevios12 with physwizz kernel v6.03

Installation.
Extract recovery.img and install from twrp into Recovery partition
Or
Install .tar from Odin

Test for MTP

@physwizz

Install kernel from terminal.

1. Download magisk module (magic-flash.zip) from https://github.com/Magisk-Modules-Alt-Repo/magic-flash
2. Install module and reboot.
3. Open terminal.
4. Navigate to folder containing kernel.zip.
Use
ls to list contents
and
cd to change directories

5. Type su
6. Type flash kernel_name.zip
7. Reboot

physwizz E625
version 1
For F62 Android 12 only

For OneUI 4
( also works for GSIs)

More CPU governors
Userspace, powersave, performance, shedutil
Optimised for performance
Underclocked for battery
little 182 - 1950
big 377 - 2400
prime 350 - 3016
lz4 as default in zram
Charging bug fixed
write support for max_freq, min_freq, target_freq

Bugs
?

Installation
https://t.iss.one/physwizz2/454

Kernel source code
https://github.com/physwizz?tab=repositories

@physwizz