RwizzROM-a02s
based on a025f
Debloated OneUI 3.1 ROM
Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver
Installation
1. Wipe caches and data
2. Install ROM
3. Install dmverity
https://t.iss.one/physwizz2/273
4. Reboot to recovery
5. Install a custom kernel
6. Install Magisk for root.
7. Reboot to system
8. Wait for welcome screen
9. Go all the way through the setup
10. Never reboot from the welcome screen
Note:
First boot takes a long time (be patient)
@physwizz
ROM
https://drive.google.com/file/d/1acEoPXxajTRkhXEin24P9Gc_XolZbKOj/view?usp=drivesdk
based on a025f
Debloated OneUI 3.1 ROM
Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver
Installation
1. Wipe caches and data
2. Install ROM
3. Install dmverity
https://t.iss.one/physwizz2/273
4. Reboot to recovery
5. Install a custom kernel
6. Install Magisk for root.
7. Reboot to system
8. Wait for welcome screen
9. Go all the way through the setup
10. Never reboot from the welcome screen
Note:
First boot takes a long time (be patient)
@physwizz
ROM
https://drive.google.com/file/d/1acEoPXxajTRkhXEin24P9Gc_XolZbKOj/view?usp=drivesdk
Telegram
Physwizz Collection
RwizzROM-a30s
Debloated OneUI 3.1 ROM
Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver
Installation
1. Wipe caches, data, system and vendor
2. Install ROM
3. Install dmverity
https://t.iss.one/physwizz2/273
4. Reboot to recovery
5. Install a custom kernel
6. Install Magisk for root.
7. Reboot to system
If it doesn't boot, install custom kernel.
8. Wait for welcome screen
9. Go all the way through the setup
10. Never reboot from the welcome screen
Note:
First boot takes a long time (be patient)
@physwizz
ROM
Kernel
Stock boot.img
Debloated OneUI 3.1 ROM
Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver
Installation
1. Wipe caches, data, system and vendor
2. Install ROM
3. Install dmverity
https://t.iss.one/physwizz2/273
4. Reboot to recovery
5. Install a custom kernel
6. Install Magisk for root.
7. Reboot to system
If it doesn't boot, install custom kernel.
8. Wait for welcome screen
9. Go all the way through the setup
10. Never reboot from the welcome screen
Note:
First boot takes a long time (be patient)
@physwizz
ROM
Kernel
Stock boot.img
Telegram
Physwizz Collection
Fix a broken screen.
1. Pack in rice to remove any moisture
2. Carefully clean screen
3. Fix it with clear packing tape.
1. Pack in rice to remove any moisture
2. Carefully clean screen
3. Fix it with clear packing tape.
Root
Method 1
(Method 2 is easier)
A. Prepare boot image
1. Download magisk manager apk
2. Download the exact firmware (including upgrade date) for your device from https://samfrew.com or https://www.samfirmware.net/ or https://www.full-repair-firmware.com/search?q=A20 or
https://samfw.com/
3. Use zarchiver to copy AP_xxxxxxx.md5 to download directory. It will extract it from the zip.
4. Extract boot.img.lz4
5. Copy boot.img.Iz4 to download directory and extract (resulting in boot.img)
6. Use magisk manager to patch boot.img (use top install)
https://t.iss.one/a127f_res/230?single
result magisk_patched.img
7. Rename magisk_patched.img to boot.img
9. Use zarchiver to compress boot.img to boot.tar.
10. Copy boot.tar to Windows pc or Windows Virtualbox.
11. On phone developer options in settings unlock OEM and enable usb debugging
12. Backup any important files from internal storage onto SD card.
B. Unlock bootloader
1. Turn phone off
2. Hold vol- and vol+ and plug in power cable attached to pc then release vol up to enter unlock screen.
3. Follow the instructions to unlock
(You might need to long press vol up to unlock bootloader)
vol + to select yes to confirm.
4. Press power key to unlock bootloader.
C. Flash boot image.
1. Use Odin in Windows to add boot.tar to phone. (Select AP). Some people recommend adding the other firmware parts to their slots at the same time.
2.Restart phone
3. select bootloader
4. Select factory reset (this will wipe data)
5. Restart phone and setup fully
6. install magisk manager
7. If green phone is rooted
8. If red select install/direct install
9. Advanced tick both.
10. Install root checker and verify root
Method 2
Use the above process but patch the ap......md5 file and flash that from Odin
Method 1
(Method 2 is easier)
A. Prepare boot image
1. Download magisk manager apk
2. Download the exact firmware (including upgrade date) for your device from https://samfrew.com or https://www.samfirmware.net/ or https://www.full-repair-firmware.com/search?q=A20 or
https://samfw.com/
3. Use zarchiver to copy AP_xxxxxxx.md5 to download directory. It will extract it from the zip.
4. Extract boot.img.lz4
5. Copy boot.img.Iz4 to download directory and extract (resulting in boot.img)
6. Use magisk manager to patch boot.img (use top install)
https://t.iss.one/a127f_res/230?single
result magisk_patched.img
7. Rename magisk_patched.img to boot.img
9. Use zarchiver to compress boot.img to boot.tar.
10. Copy boot.tar to Windows pc or Windows Virtualbox.
11. On phone developer options in settings unlock OEM and enable usb debugging
12. Backup any important files from internal storage onto SD card.
B. Unlock bootloader
1. Turn phone off
2. Hold vol- and vol+ and plug in power cable attached to pc then release vol up to enter unlock screen.
3. Follow the instructions to unlock
(You might need to long press vol up to unlock bootloader)
vol + to select yes to confirm.
4. Press power key to unlock bootloader.
C. Flash boot image.
1. Use Odin in Windows to add boot.tar to phone. (Select AP). Some people recommend adding the other firmware parts to their slots at the same time.
2.Restart phone
3. select bootloader
4. Select factory reset (this will wipe data)
5. Restart phone and setup fully
6. install magisk manager
7. If green phone is rooted
8. If red select install/direct install
9. Advanced tick both.
10. Install root checker and verify root
Method 2
Use the above process but patch the ap......md5 file and flash that from Odin
Samfrew
Your ultimate hub for original Samsung Galaxy firmware updates, downloads, and news.
❤1
CRB
https://t.iss.one/CRBplus
https://forum.xda-developers.com/t/tool-windows-kitchen-crb-v2-2-1-update.3947779/
Some versions of Windows do not support case sensitive so you need to install Windows Subsystem for Linux(WSL). This can be done from CRB.
Setup
1. Install CRB onto the C: drive.
2. Go to Windows Settings and make the CRB folder an exception for virus protection.
3. Run CRB as Administrator.
4. Import Distro
5. Test Distro
6. Install WSL
7. Reboot Windows
8. Look at videos in help folder
Run CRB as Administrator.
Create new project
Extract ROM (auto)
or Extract ROM (selective)
extract apxxxxxxxxxmd5
Make any changes to the system folder found in the ROM folder
- edit build.prop to change ROM name
- add apps to system/priv-app
Build image
choose system
then choose vendor
The zip creator is not complete but you can still flash the ROM onto your phone
The 3 files you need are
build/system.img
build/vendor.img
source/boot.img
Take these files to your phone
and either flash them individually from TWRP
or
rename system.img to system_new.img
and rename vendor.img to vendor_new.img
insert them into my CRB-installer.zip
https://t.iss.one/physwizz2/290
https://t.iss.one/CRBplus
https://forum.xda-developers.com/t/tool-windows-kitchen-crb-v2-2-1-update.3947779/
Some versions of Windows do not support case sensitive so you need to install Windows Subsystem for Linux(WSL). This can be done from CRB.
Setup
1. Install CRB onto the C: drive.
2. Go to Windows Settings and make the CRB folder an exception for virus protection.
3. Run CRB as Administrator.
4. Import Distro
5. Test Distro
6. Install WSL
7. Reboot Windows
8. Look at videos in help folder
Run CRB as Administrator.
Create new project
Extract ROM (auto)
or Extract ROM (selective)
extract apxxxxxxxxxmd5
Make any changes to the system folder found in the ROM folder
- edit build.prop to change ROM name
- add apps to system/priv-app
Build image
choose system
then choose vendor
The zip creator is not complete but you can still flash the ROM onto your phone
The 3 files you need are
build/system.img
build/vendor.img
source/boot.img
Take these files to your phone
and either flash them individually from TWRP
or
rename system.img to system_new.img
and rename vendor.img to vendor_new.img
insert them into my CRB-installer.zip
https://t.iss.one/physwizz2/290
Telegram
「CRB」Android Kitchen
「CRB」channel provides all updates related to CRB Android Kitchen. https://www.crbplus.com
❤1
Forwarded from physwizz(MCMLIV)
boot.tar
26.1 MB
Version 2
physwizz kernel a022
11. On phone developer options in settings unlock OEM and enable usb debugging
12. Backup any important files from internal storage onto SD card.B. Unlock bootloader
1. Turn phone off
2. Hold vol- and vol+ and plug in power cable attached to pc then release vol up to enter unlock screen.
3. Follow the instructions to unlock
(You might need to long press vol up to unlock bootloader)
vol + to select yes to confirm.
4. Press power key to unlock bootloader.
C. Flash boot image.
1. Use Odin in Windows to add boot.tar to phone. (Select AP). Some people recommend adding the other firmware parts to their slots at the same time.
2.Restart phone
3. select bootloader
4. Select factory reset (this will wipe data)
5. Restart phone and setup fully
6. install magisk manager
physwizz kernel a022
11. On phone developer options in settings unlock OEM and enable usb debugging
12. Backup any important files from internal storage onto SD card.B. Unlock bootloader
1. Turn phone off
2. Hold vol- and vol+ and plug in power cable attached to pc then release vol up to enter unlock screen.
3. Follow the instructions to unlock
(You might need to long press vol up to unlock bootloader)
vol + to select yes to confirm.
4. Press power key to unlock bootloader.
C. Flash boot image.
1. Use Odin in Windows to add boot.tar to phone. (Select AP). Some people recommend adding the other firmware parts to their slots at the same time.
2.Restart phone
3. select bootloader
4. Select factory reset (this will wipe data)
5. Restart phone and setup fully
6. install magisk manager
physwizz_a125_kernel.zip
14.4 MB
physwizz a12 kernel version 1
Based on a125f
No bugs so far
Kernel
https://github.com/physwizz?tab=repositories
Based on a125f
No bugs so far
Kernel
https://github.com/physwizz?tab=repositories
physwizz_a125_kernel-v2.zip
15.2 MB
physwizz a12 kernel version 2
Based on a125f
For OneUI 3.1
(May be unstable for some GSIs)
Samsung securitrs disabled
More CPU governors
Optimised for performance
Kernel
https://github.com/physwizz?tab=repositories
Based on a125f
For OneUI 3.1
(May be unstable for some GSIs)
Samsung securitrs disabled
More CPU governors
Optimised for performance
Kernel
https://github.com/physwizz?tab=repositories
To Install TWRP and Root A20 Android 11
1. Unlock Bootloader
https://t.iss.one/physwizz2/181
2. Install TWRP
https://t.iss.one/physwizz2/238
1. Unlock Bootloader
https://t.iss.one/physwizz2/181
2. Install TWRP
https://t.iss.one/physwizz2/238
Telegram
Physwizz Collection
To Unlock Bootloader
Part1.
=====
Settings
About phone
Software information
Tap Build number until developer options appears
On phone developer options in settings allow OEM unlocking and enable usb debugging by moving both
sliders RIGHT
If you don't…
Part1.
=====
Settings
About phone
Software information
Tap Build number until developer options appears
On phone developer options in settings allow OEM unlocking and enable usb debugging by moving both
sliders RIGHT
If you don't…
RwizzROM-a12
Debloated OneUI 3.1 ROM
Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver
Installation
1. Wipe caches, data, system and vendor
2. Install ROM
3. Install dmverity
https://t.iss.one/physwizz2/273
4. Reboot to recovery
5. Install Magisk for root.
6. Reboot to system
7. Wait for welcome screen
8. Go all the way through the setup
9. Never reboot from the welcome screen
Note:
First boot takes a long time (be patient)
This ROM doesn't boot so use wizzROM creator instead
https://t.iss.one/physwizz2/215
physwizz a12 kernel version 2
Based on a125f
For OneUI 3.1 and for GSI (Q or R)
Samsung securites disabled
More CPU governors
Optimised for performance
Kernel
https://github.com/physwizz?tab=repositories
@physwizz
ROM
Doesn't boot
Debloated OneUI 3.1 ROM
Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver
Installation
1. Wipe caches, data, system and vendor
2. Install ROM
3. Install dmverity
https://t.iss.one/physwizz2/273
4. Reboot to recovery
5. Install Magisk for root.
6. Reboot to system
7. Wait for welcome screen
8. Go all the way through the setup
9. Never reboot from the welcome screen
Note:
First boot takes a long time (be patient)
This ROM doesn't boot so use wizzROM creator instead
https://t.iss.one/physwizz2/215
physwizz a12 kernel version 2
Based on a125f
For OneUI 3.1 and for GSI (Q or R)
Samsung securites disabled
More CPU governors
Optimised for performance
Kernel
https://github.com/physwizz?tab=repositories
@physwizz
ROM
Doesn't boot
❤1
physwizz-debloater-v3-mtk.zip
4.8 MB
physwizz Debloater v3 Mediatek
For a107 (a10s), a12 and a22 etc
With physwizz-2 app
Updated to fix file picker
I'm using a very unusual method.
I replace the apps with a blank apk file.
Installation
Backup system
Install from TWRP
If you find you want to get one of the apps back just restore the system backup
Then use zarchiver to remove the apk from my Debloater.
Then reinstall it.
@physwizz
For a107 (a10s), a12 and a22 etc
With physwizz-2 app
Updated to fix file picker
I'm using a very unusual method.
I replace the apps with a blank apk file.
Installation
Backup system
Install from TWRP
If you find you want to get one of the apps back just restore the system backup
Then use zarchiver to remove the apk from my Debloater.
Then reinstall it.
@physwizz
wizz-ROM-creator-snap.zip
56.9 MB
wizzROM Creator Snapdragon
for Samsung a11 and a02s
Updated to fix file picker
Turn any stock or custom OneUI into a QwizzROM or RwizzROM
OneUI 2.0 will become QwizzROM
OneUI 3.1 will become RwizzROM
Debloated ROM with Extras
Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver
physwizz-2 app
Make sure your OneUI ROM iis running befote you start
Installation Steps
1. Boot into TWRP or OrangeFox
2. Mount System and Vendor
3. Backup System (in case something goes wrong)
4. Open TWRP/OrangeFox terminal
5. And then type ->
7. Reboot System
Debloat list:
https://t.iss.one/physwizz2/200
Name your wizzROM (optional)
1. Use a root explorer to copy and paste system/build.prop to new location
2. Edit build.prop like this
ro.build.display.id=<your-name>
3. Use zarchiver to paste the new build.prop into the system folder inside wizzROM-creator zip
4. Install wizzROM-creator zip
@physwizz
for Samsung a11 and a02s
Updated to fix file picker
Turn any stock or custom OneUI into a QwizzROM or RwizzROM
OneUI 2.0 will become QwizzROM
OneUI 3.1 will become RwizzROM
Debloated ROM with Extras
Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver
physwizz-2 app
Make sure your OneUI ROM iis running befote you start
Installation Steps
1. Boot into TWRP or OrangeFox
2. Mount System and Vendor
3. Backup System (in case something goes wrong)
4. Open TWRP/OrangeFox terminal
5. And then type ->
mount -o rw,remount /system_root
6. Install the downloaded zip7. Reboot System
Debloat list:
https://t.iss.one/physwizz2/200
Name your wizzROM (optional)
1. Use a root explorer to copy and paste system/build.prop to new location
2. Edit build.prop like this
ro.build.display.id=<your-name>
3. Use zarchiver to paste the new build.prop into the system folder inside wizzROM-creator zip
4. Install wizzROM-creator zip
@physwizz
wizzROM Creators
1. TWRP zips
Note: if the zip file doesn't work, use the magisk module instead
wizzROM Creator Exynos 7884 & 7904
https://t.iss.one/physwizz2/214
wizzROM Creator Mediatek
https://t.iss.one/physwizz2/215
wizzROM Creator Snapdragon
https://t.iss.one/physwizz2/316
wizzROM-creator Exynos 850 v2
https://t.iss.one/physwizz2/403
2. Magisk module
Magisk wizzROM creator module v4.2
https://t.iss.one/physwizz2/428
@physwizz
1. TWRP zips
Note: if the zip file doesn't work, use the magisk module instead
wizzROM Creator Exynos 7884 & 7904
https://t.iss.one/physwizz2/214
wizzROM Creator Mediatek
https://t.iss.one/physwizz2/215
wizzROM Creator Snapdragon
https://t.iss.one/physwizz2/316
wizzROM-creator Exynos 850 v2
https://t.iss.one/physwizz2/403
2. Magisk module
Magisk wizzROM creator module v4.2
https://t.iss.one/physwizz2/428
@physwizz
Telegram
Physwizz Collection
wizzROM Creator magisk module v4.2
DO NOT INSTALL FROM TWRP
Install from magisk or kernelSU
for all Samsung phones
Debloated ROM with Extras
Fixed apps in system/product
Extras:
HKtweaks
SimpleReboot
Root Explorer
Zarchiver
physwizz-2
Thermal throttling…
DO NOT INSTALL FROM TWRP
Install from magisk or kernelSU
for all Samsung phones
Debloated ROM with Extras
Fixed apps in system/product
Extras:
HKtweaks
SimpleReboot
Root Explorer
Zarchiver
physwizz-2
Thermal throttling…
Debloaters
1. TWRP zips:
Debloater Exynos v3
https://t.iss.one/physwizz2/199
Debloater Mediatek v3
https://t.iss.one/physwizz2/315
Debloater Snapdragon v3
https://t.iss.one/physwizz2/224
Debloater Exynos 850 v3
https://t.iss.one/physwizz2/400
Debloater Ex9820/9825
https://t.iss.one/physwizz2/1418
Debloat list:
https://t.iss.one/physwizz2/200
2. Magisk module:
Magisk Debloater Module v4
https://t.iss.one/physwizz2/740
@physwizz
1. TWRP zips:
Debloater Exynos v3
https://t.iss.one/physwizz2/199
Debloater Mediatek v3
https://t.iss.one/physwizz2/315
Debloater Snapdragon v3
https://t.iss.one/physwizz2/224
Debloater Exynos 850 v3
https://t.iss.one/physwizz2/400
Debloater Ex9820/9825
https://t.iss.one/physwizz2/1418
Debloat list:
https://t.iss.one/physwizz2/200
2. Magisk module:
Magisk Debloater Module v4
https://t.iss.one/physwizz2/740
@physwizz
Telegram
Physwizz Collection
physwizz Debloater v3 Exynos
(Not Exynos850)
With physwizz-2 app
Updated to fix file picker
For all a-series exynos models
I'm using a very unusual method.
I replace the apps with a blank apk file.
Installation
Backup system
Install from TWRP
…
(Not Exynos850)
With physwizz-2 app
Updated to fix file picker
For all a-series exynos models
I'm using a very unusual method.
I replace the apps with a blank apk file.
Installation
Backup system
Install from TWRP
…
❤1
Extra System Apps
Extras Exynos
https://t.iss.one/physwizz2/192
Extras Mediatek
https://t.iss.one/physwizz2/196
Magisk Extras Module v2
https://t.iss.one/physwizz2/258
@physwizz
Extras Exynos
https://t.iss.one/physwizz2/192
Extras Mediatek
https://t.iss.one/physwizz2/196
Magisk Extras Module v2
https://t.iss.one/physwizz2/258
@physwizz
Telegram
Physwizz Collection
Extra OneUI System Apps V2
For all a-series exynos models
OneUI 2.0 or 3.1
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Viper (Q only)
Zarchiver
physwizz-2 app
Backup system.
Install from TWRP
reboot
You can use…
For all a-series exynos models
OneUI 2.0 or 3.1
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Viper (Q only)
Zarchiver
physwizz-2 app
Backup system.
Install from TWRP
reboot
You can use…