Neoteric OS Android 16 Changelog
* Updated to LA.QSSI.16.0.r1-13600-qssi.0
* Bumped security patch level to 2026-06-05
* Updated device blobs to OS3.0.4.0.VMRMIXM
* Updated firmware to OS3.0.4.0.VMRMIXM
* Updated audio hal, agm and arpal-lx repo to LA.VENDOR.1.0.r1-29700-WAIPIO.QSSI16.0
Kernel: 5.10.252-beryl-e4a0376665-m1aa5fb6d-d3c821dc3
* battmngr: iio: use pd_iio_channels in is_pd_chan_valid()
* battmngr: iio: fix slave reg_status channel mapping
* power: supply: xiaomi: bq27z561: Compare against correct enum
Dolby & Audio
* Switched to newer standalone Dolby Vision stack from A16 (Brighter and darker colours)
* Fixed crash loop on boot before user unlocks
* Introduce synchronization guard in PlaybackActivityMonitor (fix duck issue ig)
* Fix mCommunicationDeviceUpdateCount underflow in legacy audio APIs
* Re-apply VOICE_CALL volume after routing update in communication mode
* Fix media focus issues
* Fix HDMI CEC volume control setting being ignored
* Don't play sound effects if stream is muted
* Reduce redundant volume broadcasts
* Allow customizing volume stream steps
* Disable safe media volume management
* Remove restrictions for system audio record
* Fixing per-app volume UX
* Add QTI SW audio decoders (ALAC, APE, FLAC, DSD)
* Remove mono channel from voip_rx profile
Camera
* Fixed camera flashlight not working (conflicting with torch control)
* Allow DngCreator to handle vendor RAW buffer sizes
Connectivity & Telephony
* Fix NPE caused by SatelliteAccessController
* Use globally accessible Captive and NTP servers
Bluetooth
* Build our own reversed aptxacu (Better UI in aptx setting)
Performance
* Set uclamp tuning for taro
* Limit dex2oat cpu utilization
* Unset scheduler ratelimits
Security & Spoofing
* Introduce per-app spoofing support
* Introduce custom spoof device support
Display
* Drop HWC Dolby Vision hooks — caused green screen in OTT apps
- System now relies on stable stock HWC behavior
- Dolby Vision capability maintained via Parts override
* Add support for secondary display in AodNotifier
Misc
* Disable FRP
* Properly handle HIDL return values
* Sensors: switch to shared_ptr to avoid memory leaks
* Keyhandler: ignore non-fingerprint input devices
* Launch power menu from QS only if enabled
* Updated to LA.QSSI.16.0.r1-13600-qssi.0
* Bumped security patch level to 2026-06-05
* Updated device blobs to OS3.0.4.0.VMRMIXM
* Updated firmware to OS3.0.4.0.VMRMIXM
* Updated audio hal, agm and arpal-lx repo to LA.VENDOR.1.0.r1-29700-WAIPIO.QSSI16.0
Kernel: 5.10.252-beryl-e4a0376665-m1aa5fb6d-d3c821dc3
* battmngr: iio: use pd_iio_channels in is_pd_chan_valid()
* battmngr: iio: fix slave reg_status channel mapping
* power: supply: xiaomi: bq27z561: Compare against correct enum
Dolby & Audio
* Switched to newer standalone Dolby Vision stack from A16 (Brighter and darker colours)
* Fixed crash loop on boot before user unlocks
* Introduce synchronization guard in PlaybackActivityMonitor (fix duck issue ig)
* Fix mCommunicationDeviceUpdateCount underflow in legacy audio APIs
* Re-apply VOICE_CALL volume after routing update in communication mode
* Fix media focus issues
* Fix HDMI CEC volume control setting being ignored
* Don't play sound effects if stream is muted
* Reduce redundant volume broadcasts
* Allow customizing volume stream steps
* Disable safe media volume management
* Remove restrictions for system audio record
* Fixing per-app volume UX
* Add QTI SW audio decoders (ALAC, APE, FLAC, DSD)
* Remove mono channel from voip_rx profile
Camera
* Fixed camera flashlight not working (conflicting with torch control)
* Allow DngCreator to handle vendor RAW buffer sizes
Connectivity & Telephony
* Fix NPE caused by SatelliteAccessController
* Use globally accessible Captive and NTP servers
Bluetooth
* Build our own reversed aptxacu (Better UI in aptx setting)
Performance
* Set uclamp tuning for taro
* Limit dex2oat cpu utilization
* Unset scheduler ratelimits
Security & Spoofing
* Introduce per-app spoofing support
* Introduce custom spoof device support
Display
* Drop HWC Dolby Vision hooks — caused green screen in OTT apps
- System now relies on stable stock HWC behavior
- Dolby Vision capability maintained via Parts override
* Add support for secondary display in AodNotifier
Misc
* Disable FRP
* Properly handle HIDL return values
* Sensors: switch to shared_ptr to avoid memory leaks
* Keyhandler: ignore non-fingerprint input devices
* Launch power menu from QS only if enabled
🔥10❤4
kernelsunext.ko
399.7 KB
KernelSU 3.2.5 - App Link
KowSU - App Link
KernelSU Next - App Link
Check under notes for #steps_to_use_kernelsu_module
KowSU - App Link
KernelSU Next - App Link
Check under notes for #steps_to_use_kernelsu_module
#Neoteric #Clo #Unofficial #W #Marble
NeotericOS | CLO | Unofficial | Android 16
Updated: 24/06/'26
▪️Fastboot | Mirror
▪️Recovery | Mirror
▪️Screenshots
▪️Changelog
▪️Source
▪️Support Group
▪️Donate
Notes:
• Global HyperOS firmware is included .
• Can check group kernelsu/kowsu module in notes and how to use it in support group
• Report any issues or bugs with logcat (how to?) otherwise they will be ignored!
• Kindly donate for server cost and if you like my work
Credits:
• Gr and OCD
By @ShadeDark6
Follow @Poco_F5Official
Join @PocoF5_Official
NeotericOS | CLO | Unofficial | Android 16
Updated: 24/06/'26
▪️Fastboot | Mirror
▪️Recovery | Mirror
▪️Screenshots
▪️Changelog
▪️Source
▪️Support Group
▪️Donate
Notes:
• Global HyperOS firmware is included .
• Can check group kernelsu/kowsu module in notes and how to use it in support group
• Report any issues or bugs with logcat (how to?) otherwise they will be ignored!
• Kindly donate for server cost and if you like my work
Credits:
• Gr and OCD
By @ShadeDark6
Follow @Poco_F5Official
Join @PocoF5_Official
🔥7❤2
Well all/most bugs are fixed whichever I got logs for
Aospa build -
Merged with latest clo tag , can check source to see all changes
All camera issues fixed
Audio related fixes same as neoteric
Has changes same as neoteric in device side
And dolby vision is also working along with audio codec support for apple music and other apps
Aospa build -
Merged with latest clo tag , can check source to see all changes
All camera issues fixed
Audio related fixes same as neoteric
Has changes same as neoteric in device side
And dolby vision is also working along with audio codec support for apple music and other apps
❤8
AOSPA Beryl Android 16 Changelog
- Updated system to LA.QSSI.16.0.r1-13900-qssi.0
- Updated Audio HAL, Agm and Arpal-lx to LA.VENDOR.1.0.r1-29700-WAIPIO.QSSI16.0
- Bumped security patch level to 2026-06-05
- Updated device blobs to OS3.0.4.0.VMRMIXM
- Kernel: 5.10.252-beryl-e4a0376665-m1aa5fb6d-d3c821dc3:
- Fixed BQ27Z561 battery fuel gauge comparing against incorrect enum value
- Fixed slave charge pump IIO reg_status channel incorrectly referencing master node
- Fixed PD IIO channel validation using wrong enum type, preventing potential invalid array indexing
- Restored Dolby Vision support (works in Netflix and other OTT apps)
- Switched to newer standalone Dolby Vision stack from Android 16 for improved colour accuracy and dynamic range
- Fixed Dolby Vision playback crash caused by GraphicBuffer allocation size mismatch after upstream struct changes
- Fixed DolbyController crash loop on boot — CE storage now only accessed after first user unlock
- Migrated Dolby settings UI to Material3 MainSwitchBar and Switch components
- Fixed VoIP audio going completely silent after switching output devices (earpiece ↔️ speaker ↔️ headphones)
- Fixed audio ducking and interruptions during active VoIP calls when media apps are running in background
- Restored VoIP stream volume when a concurrent media app releases audio focus
- Fixed mic issues in VoIP apps like WhatsApp
- Removed Mono channel from VoIP RX profile for cleaner call audio
- Fixed sound effects incorrectly playing on muted streams
- Fixed HDMI CEC volume control setting being ignored
- Fixed audio focus requests incorrectly blocked for apps built with older SDK versions
- Disabled safe media volume nag
- Removed restrictions for system audio recording
- Increased initial stereo master volume
- Added QTI software audio decoders — ALAC (Apple Lossless), APE (Monkey's Audio), FLAC (Free Lossless Audio Codec) and DSD (Direct Stream Digital) — enabling lossless and high-resolution audio playback natively
- Arpal-lx:
- Allowed setting initial master gain for stereo streams
- Fixed volume payload size for audio sessions
- Guarded mic occlusion events to prevent unintended triggers
- Guarded voice calibration key values from being set unexpectedly
- Reverted ResourceManager activeStreams fix that caused regressions
- Imported Xiaomi-specific camera vendor tags, Exif modifications and DistortionMapper changes
- Allowed Google Camera and other selected apps to access multiple cameras simultaneously
- Allowed selected camera apps to skip unconfigure for faster camera switching
- Added support for manual 3A (Auto-focus, Auto-exposure, Auto-white balance) control
- Added support for sending vendor/device-specific commands to the camera HAL
- Exposed auxiliary cameras to third-party apps
- Fixed potential segfault when null parameter passed to camera pipeline
- Improved compatibility with GCC-compiled camera HAL3 drivers
- Fixed buffer dimension rounding for Y8 format
- Switched skin temperature sensor from xo_therm to quiet_therm for more accurate thermal reporting
- Applied uclamp tuning for Snapdragon 8 Gen 1 (Taro) platform
- Unset scheduler rate limits for improved CPU responsiveness
- Limited dex2oat CPU utilisation to reduce background compilation overhead
- Reduced redundant property_get() calls on every gralloc buffer allocation
- Dropped media seccomp policies
- Built aptX ACU codec locally instead of relying on prebuilt
- Fixed HIDL return value handling
- Disabled FRP (Factory Reset Protection)
- Fixed memory leaks in sensors HAL via shared_ptr
- Fixed keyhandler incorrectly processing non-fingerprint input devices
- Added secondary display support in AodNotifier
- Updated system to LA.QSSI.16.0.r1-13900-qssi.0
- Updated Audio HAL, Agm and Arpal-lx to LA.VENDOR.1.0.r1-29700-WAIPIO.QSSI16.0
- Bumped security patch level to 2026-06-05
- Updated device blobs to OS3.0.4.0.VMRMIXM
- Kernel: 5.10.252-beryl-e4a0376665-m1aa5fb6d-d3c821dc3:
- Fixed BQ27Z561 battery fuel gauge comparing against incorrect enum value
- Fixed slave charge pump IIO reg_status channel incorrectly referencing master node
- Fixed PD IIO channel validation using wrong enum type, preventing potential invalid array indexing
- Restored Dolby Vision support (works in Netflix and other OTT apps)
- Switched to newer standalone Dolby Vision stack from Android 16 for improved colour accuracy and dynamic range
- Fixed Dolby Vision playback crash caused by GraphicBuffer allocation size mismatch after upstream struct changes
- Fixed DolbyController crash loop on boot — CE storage now only accessed after first user unlock
- Migrated Dolby settings UI to Material3 MainSwitchBar and Switch components
- Fixed VoIP audio going completely silent after switching output devices (earpiece ↔️ speaker ↔️ headphones)
- Fixed audio ducking and interruptions during active VoIP calls when media apps are running in background
- Restored VoIP stream volume when a concurrent media app releases audio focus
- Fixed mic issues in VoIP apps like WhatsApp
- Removed Mono channel from VoIP RX profile for cleaner call audio
- Fixed sound effects incorrectly playing on muted streams
- Fixed HDMI CEC volume control setting being ignored
- Fixed audio focus requests incorrectly blocked for apps built with older SDK versions
- Disabled safe media volume nag
- Removed restrictions for system audio recording
- Increased initial stereo master volume
- Added QTI software audio decoders — ALAC (Apple Lossless), APE (Monkey's Audio), FLAC (Free Lossless Audio Codec) and DSD (Direct Stream Digital) — enabling lossless and high-resolution audio playback natively
- Arpal-lx:
- Allowed setting initial master gain for stereo streams
- Fixed volume payload size for audio sessions
- Guarded mic occlusion events to prevent unintended triggers
- Guarded voice calibration key values from being set unexpectedly
- Reverted ResourceManager activeStreams fix that caused regressions
- Imported Xiaomi-specific camera vendor tags, Exif modifications and DistortionMapper changes
- Allowed Google Camera and other selected apps to access multiple cameras simultaneously
- Allowed selected camera apps to skip unconfigure for faster camera switching
- Added support for manual 3A (Auto-focus, Auto-exposure, Auto-white balance) control
- Added support for sending vendor/device-specific commands to the camera HAL
- Exposed auxiliary cameras to third-party apps
- Fixed potential segfault when null parameter passed to camera pipeline
- Improved compatibility with GCC-compiled camera HAL3 drivers
- Fixed buffer dimension rounding for Y8 format
- Switched skin temperature sensor from xo_therm to quiet_therm for more accurate thermal reporting
- Applied uclamp tuning for Snapdragon 8 Gen 1 (Taro) platform
- Unset scheduler rate limits for improved CPU responsiveness
- Limited dex2oat CPU utilisation to reduce background compilation overhead
- Reduced redundant property_get() calls on every gralloc buffer allocation
- Dropped media seccomp policies
- Built aptX ACU codec locally instead of relying on prebuilt
- Fixed HIDL return value handling
- Disabled FRP (Factory Reset Protection)
- Fixed memory leaks in sensors HAL via shared_ptr
- Fixed keyhandler incorrectly processing non-fingerprint input devices
- Added secondary display support in AodNotifier
🔥14❤3
#AOSPA #Unofficial #ROM #W #stayparanoid
Paranoid Android Beryl - UNOFFICIAL | Android 16
Updated: 26/06/'26
▪️Fastboot
▪️Recovery
▪️Changelog
▪️Source
▪️Support Group
▪️Donate
Notes:
• Global HyperOS firmware is included .
• Can check group notes for lkm based kernelsu module files and how to use it if need root
• Use modules to get strong integrity if that matters to you
• Report any issues or bugs with logcat (how to?) otherwise they will be ignored!
• Kindly donate for server cost and if you like my work
Credits:
• Gr and OCD
By @ShadeDark6
Follow @Poco_F5Official
Join @PocoF5_Official
Paranoid Android Beryl - UNOFFICIAL | Android 16
Updated: 26/06/'26
▪️Fastboot
▪️Recovery
▪️Changelog
▪️Source
▪️Support Group
▪️Donate
Notes:
• Global HyperOS firmware is included .
• Can check group notes for lkm based kernelsu module files and how to use it if need root
• Use modules to get strong integrity if that matters to you
• Report any issues or bugs with logcat (how to?) otherwise they will be ignored!
• Kindly donate for server cost and if you like my work
Credits:
• Gr and OCD
By @ShadeDark6
Follow @Poco_F5Official
Join @PocoF5_Official
❤9👍2🔥2
ksun_susfs-marble-beryl(a16).zip
21.3 MB
KernelSU Next Apk - Link https://t.iss.one/ksunext_ci/14680
Based on 5.10.252-beryl-e4a0376665-m1aa5fb6d-d3c821dc3
For June Release Builds - Aospa A16 and Neoteric A16
Flash in custom recovery like ofox if you want to use provided zip
Based on 5.10.252-beryl-e4a0376665-m1aa5fb6d-d3c821dc3
For June Release Builds - Aospa A16 and Neoteric A16
Flash in custom recovery like ofox if you want to use provided zip
❤4👍2
ShadeDark | Marble Updates Channel
Screenshots
Well built anything with clo in the name lol
Clover Rom - Qpr2 Aosp based
• Bouquet kernel should be supported this time
Well next time would be a17 if I get time as well and kindly donate this month's server cost as well
Clover Rom - Qpr2 Aosp based
• Bouquet kernel should be supported this time
Well next time would be a17 if I get time as well and kindly donate this month's server cost as well
The Clover Project Changelog
• Brought back Dolby Vision and switched to newer standalone Dolby Vision stack from Android 16 for improved colour accuracy and dynamic range
• Updated common blobs from diting OS3.0.4.0.VLFMIXM
• Updated device blobs from OS3.0.4.0.VMRMIXM
• Introduced double-tap fingerprint gesture support
• Switched to stock fingerprint HAL for improved reliability
• Parts app fully rewritten using Jetpack Compose
• Added per-app auxiliary camera access controls
• Refactored thermal settings fragments
• Switched to QTI Perf HAL for improved performance (no PowerHint)
• Should support Bouquet kernel
• Kernel updated to 5.258 with additional optimizations (Credits to Arian, @Jinetty21 and @JoseoPablo)
• Kernel renamed to Zenith
• Set androidboot.init_fatal_reboot_target=recovery
• Configured PELT half-life to 8 at boot
• Added default affinity bootarg for Waipio
• Enabled allow_file_spec_access on Waipio
• Refactored aux camera control state handling
• Configured power key input boost
• Reduced blur radius in overlays
• Removed virtual framebuffer
• Brought back Dolby Vision and switched to newer standalone Dolby Vision stack from Android 16 for improved colour accuracy and dynamic range
• Updated common blobs from diting OS3.0.4.0.VLFMIXM
• Updated device blobs from OS3.0.4.0.VMRMIXM
• Introduced double-tap fingerprint gesture support
• Switched to stock fingerprint HAL for improved reliability
• Parts app fully rewritten using Jetpack Compose
• Added per-app auxiliary camera access controls
• Refactored thermal settings fragments
• Switched to QTI Perf HAL for improved performance (no PowerHint)
• Should support Bouquet kernel
• Kernel updated to 5.258 with additional optimizations (Credits to Arian, @Jinetty21 and @JoseoPablo)
• Kernel renamed to Zenith
• Set androidboot.init_fatal_reboot_target=recovery
• Configured PELT half-life to 8 at boot
• Added default affinity bootarg for Waipio
• Enabled allow_file_spec_access on Waipio
• Refactored aux camera control state handling
• Configured power key input boost
• Reduced blur radius in overlays
• Removed virtual framebuffer
#TheCloverProject #Unofficial #W #Marble
The Clover Project v3.11 | UNOFFICIAL | Android 16
Updated: 27/06/26'
▪️ Gapps l Mirror
▪️ Vanilla | Mirror
▪️ KernelSU Next - Zip | App Link
▪️ Changelogs : Source | Device
▪️ Screenshots
▪️ Support Group
▪️ Donate
Notes:
• Gapps and Vanilla build available
• Use provided ksu next with susfs in above link if want to use root
• Latest Global Firmware included.
• Please consider Donating
Credits:
• All the marble device devs.
By @ShadeDark6
Follow @Poco_F5Official
Join @PocoF5_Official
The Clover Project v3.11 | UNOFFICIAL | Android 16
Updated: 27/06/26'
▪️ Gapps l Mirror
▪️ Vanilla | Mirror
▪️ KernelSU Next - Zip | App Link
▪️ Changelogs : Source | Device
▪️ Screenshots
▪️ Support Group
▪️ Donate
Notes:
• Gapps and Vanilla build available
• Use provided ksu next with susfs in above link if want to use root
• Latest Global Firmware included.
• Please consider Donating
Credits:
• All the marble device devs.
By @ShadeDark6
Follow @Poco_F5Official
Join @PocoF5_Official
❤5
New CodeLinaro OSS release detected!
Tag:
Date: 2026-06-29T22:47:22.000+00:00
Tag:
LA.QSSI.17.0.r1-07200-qssi.0 Date: 2026-06-29T22:47:22.000+00:00
🔥19❤1
Will release neoteric and aospa eol build for a16 , some fixes and latest clo tag merge and might remove additional spoof things like disable spoof option for integrity which might be the cause and then might see a17 if have time , well a17 would have the new spoof anyways in neoteric
Well update will be if service centre gives phone by this week atleast , else after sep anyways next
Is spoof really not working in neoteric or it's only some apps not working?
Well update will be if service centre gives phone by this week atleast , else after sep anyways next
Is spoof really not working in neoteric or it's only some apps not working?
👍7❤2🔥2