memory heap
Одна из его работ — образ Генри Кейса, главного героя в романе "Neuromancer" Вильяма Гибсона: https://www.reddit.com/r/Cyberpunk/comments/63m5gh/neuromancer_cover_art_by_josan_gonzalez/ #art #cyberpunk
YouTube
The Future is Now - Nightfall
The Future is Now universe merch and books at:
https://citadel9.com/
This is a reupload - Redux version
This version contains a series of upgrades and remakes that I felt the trailer needed.
Original track by Ogre Sound, available at:
https://ogresound.…
https://citadel9.com/
This is a reupload - Redux version
This version contains a series of upgrades and remakes that I felt the trailer needed.
Original track by Ogre Sound, available at:
https://ogresound.…
💩1
Forwarded from Hacker News
The Internet needs the InterPlanetary File System (Score: 150+ in 23 hours)
Link: https://readhacker.news/s/5nKRZ
Comments: https://readhacker.news/c/5nKRZ
Link: https://readhacker.news/s/5nKRZ
Comments: https://readhacker.news/c/5nKRZ
IEEE Spectrum
Why the Internet needs the InterPlanetary File System
We could be using the InterPlanetary File System, a peer-to-peer file-sharing system that promises to make the Net more efficient
💩1
Попал в руки такой экспонат -- клавиатура NTC KB-6251/2 примерно 1988 года выпуска. Попытался снять несколько кейкапов, чтобы почистить — оказалась, пластмасса уже "усталая" и легко ломается, так что пару защёлок на кейкапах пришлось супер-клеем чинить. Вытащил также саму кнопку из свича, потом долго ломал голову, как собрать обратно; собрал, мультиметром проверил — даже вроде работает. Заказал адаптер PS/2-to-USB, как придёт — буду тестировать. В целом, клавиатура должна быть рабочая, если конечно я что-то ещё не поломал.
👍2
Пробую в хакерспейсе CADR вырезать ножки для клавиатуры заместо рассыпавшихся от времени резиновых. Резинистый материал предположительно является полиуританом. Тяжело режется даже скальпелем -- очень вязкий.
Интересный и развёрнутый ответ атеиста (Forrest Valkai) на вопрос верующего "если мы произошли от обезьян, то почему обезьяны всё ещё здесь?" (таймкод в ссылке):
https://youtu.be/oEpUo7HZ_xs?t=1140
https://youtu.be/oEpUo7HZ_xs?t=1140
Valkai Labs
STEM-Themed Motivational Youth Speaker - Tulsa, Oklahoma
Forrest Valkai is a biologist and YouTuber who teaches people to love science and themselves by combining mind-blowing science and powerful life lessons!
Вместе с @nexi5_channel мучаем https://chat.openai.com
Вот здесь нейронку попросили сгенерировать G-код для тестового кубика 10х10х10мм под 3D-принтер RepRap.
Запрос:
"Generate a G-Code that prints a plastic cube of size 10x10x10 millimeters on a RepRap 3D-printer with the layer height of 0.25mm and the nozzle diameter of 0.4mm. The extruder temperature must be set to 230 degrees of Celsius as the material is PETG; the bed temperature must be set to 60 degrees of Celsius."
Жаль, что нейронка G-код недописала, плюс ещё он и в Prusa Slicer GCode Viewer не открывается.
Вот здесь нейронку попросили сгенерировать G-код для тестового кубика 10х10х10мм под 3D-принтер RepRap.
Запрос:
"Generate a G-Code that prints a plastic cube of size 10x10x10 millimeters on a RepRap 3D-printer with the layer height of 0.25mm and the nozzle diameter of 0.4mm. The extruder temperature must be set to 230 degrees of Celsius as the material is PETG; the bed temperature must be set to 60 degrees of Celsius."
Жаль, что нейронка G-код недописала, плюс ещё он и в Prusa Slicer GCode Viewer не открывается.
ChatGPT
ChatGPT helps you get answers, find inspiration, and be more productive.
Forwarded from Nexi's chat
Here is a possible G-Code that prints a plastic cube on a RepRap 3D-printer of size 10x10x10 millimeters with the layer height of 0.25mm and the nozzle diameter of 0.4mm. The extruder temperature is set to 230 degrees of Celsius as the material is PETG and the bed temperature is set to 60 degrees of Celsius:
G21 ; set units to millimeters
G90 ; use absolute positioning
M83 ; use relative distances for extrusion
; Set the extruder temperature to 230 degrees Celsius and wait for it to reach that temperature
M109 S230
; Set the bed temperature to 60 degrees Celsius and wait for it to reach that temperature
M190 S60
; Set the nozzle diameter to 0.4mm
G92 E0 ; reset the extrusion distance
G1 F200 E5 ; extrude 5mm of material at a feed rate of 200mm/min
; Move to the starting position
G1 Z0.25 F300 ; move the bed up to the starting height
G1 X0 Y0 F3000 ; move to the starting position
; Print the first layer
G1 F5000
G1 X10 E10 ; extrude 10mm of material while moving to the end position
G1 Y10 E10
G1 X0 E10
G1 Y0 E10
; Print the second layer
G1 Z0.5 F300 ; move the bed up by 0.25mm
G1 X10 E10 ; extrude 10mm of material while moving to the end position
G1 Y10 E10
G1 X0 E10
G1 Y0 E10
; Print the third layer
G1 Z0.75 F300 ; move the bed up by 0.25mm
G1 X10 E10 ; extrude 10mm of material while moving to the end position
G1 Y10 E10
G1 X0 E10
G1 Y0 E10
; Print the fourth layer
G1 Z1 F300 ; move the bed up by 0.25mm
G1 X10 E10 ; extrude 10mm of material while moving to the end position
G1 Y10 E10
G1 X0 E10
G1 Y0 E10
; Print the fifth layer
G1 Z1.25 F300 ; move the bed up by 0.25mm
G1 X10 E10 ; extrude 10mm of material while moving to the end position
G1 Y10 E10
G1 X0 E10
G1 Y0 E10
; Print the sixth layer
G1 Z1.5 F300 ; move the bed up by 0.25mm
G1 X10 E10 ; extrude 10mm of material while moving to the end position
G1 Y10 E10
G1 X0 E10
G1 Y0 E10
; Print the seventh layer
G1 Z1.75 F300 ; move the bed up by 0.25mm
G1 X10 E10 ; extrude 10mm of material while moving to the end position
G1 Y10 E10
G1 X0 E10
G1 Y0 E10
; Print the eighth layer
G1 Z2 F300 ; move the bed up by 0.25mm
G1 X10 E10 ; extrude 10mm of material while moving to the end position
G1 Y10 E10
G1 X0 E10
G1 Y0 E10
; Print the
G21 ; set units to millimeters
G90 ; use absolute positioning
M83 ; use relative distances for extrusion
; Set the extruder temperature to 230 degrees Celsius and wait for it to reach that temperature
M109 S230
; Set the bed temperature to 60 degrees Celsius and wait for it to reach that temperature
M190 S60
; Set the nozzle diameter to 0.4mm
G92 E0 ; reset the extrusion distance
G1 F200 E5 ; extrude 5mm of material at a feed rate of 200mm/min
; Move to the starting position
G1 Z0.25 F300 ; move the bed up to the starting height
G1 X0 Y0 F3000 ; move to the starting position
; Print the first layer
G1 F5000
G1 X10 E10 ; extrude 10mm of material while moving to the end position
G1 Y10 E10
G1 X0 E10
G1 Y0 E10
; Print the second layer
G1 Z0.5 F300 ; move the bed up by 0.25mm
G1 X10 E10 ; extrude 10mm of material while moving to the end position
G1 Y10 E10
G1 X0 E10
G1 Y0 E10
; Print the third layer
G1 Z0.75 F300 ; move the bed up by 0.25mm
G1 X10 E10 ; extrude 10mm of material while moving to the end position
G1 Y10 E10
G1 X0 E10
G1 Y0 E10
; Print the fourth layer
G1 Z1 F300 ; move the bed up by 0.25mm
G1 X10 E10 ; extrude 10mm of material while moving to the end position
G1 Y10 E10
G1 X0 E10
G1 Y0 E10
; Print the fifth layer
G1 Z1.25 F300 ; move the bed up by 0.25mm
G1 X10 E10 ; extrude 10mm of material while moving to the end position
G1 Y10 E10
G1 X0 E10
G1 Y0 E10
; Print the sixth layer
G1 Z1.5 F300 ; move the bed up by 0.25mm
G1 X10 E10 ; extrude 10mm of material while moving to the end position
G1 Y10 E10
G1 X0 E10
G1 Y0 E10
; Print the seventh layer
G1 Z1.75 F300 ; move the bed up by 0.25mm
G1 X10 E10 ; extrude 10mm of material while moving to the end position
G1 Y10 E10
G1 X0 E10
G1 Y0 E10
; Print the eighth layer
G1 Z2 F300 ; move the bed up by 0.25mm
G1 X10 E10 ; extrude 10mm of material while moving to the end position
G1 Y10 E10
G1 X0 E10
G1 Y0 E10
; Print the
А вот с фрезеровкой у нейронки получше дела обстоят — возможно ещё, задание проще.