Hackaday
1.06K subscribers
18.3K photos
52.3K links
New posts from hackaday.com
Download Telegram
Driving a PAL TV Over RF Thanks To PWM Harmonics
https://hackaday.com/2020/08/26/driving-a-pal-tv-over-rf-thanks-to-pwm-harmonics/

While most analog televisions come with composite video inputs on a yellow RCA jack, the feature is not universal. This problem was even more prevalent in the 1980s, and most home consoles got around the problem by instead feeding video to the television’s tuner with an RF modulator. [Manzel Seet] …read more (https://hackaday.com/2020/08/26/driving-a-pal-tv-over-rf-thanks-to-pwm-harmonics/)
Slack Off from Home with a Networked Jam Session
https://hackaday.com/2020/08/26/slack-off-from-home-with-a-networked-jam-session/

Those of you who were regular office dwellers before the pandemic: do you miss being with your coworkers at all? Maybe just a couple of them? There’s only so much fun you can have through a chat window or a videoconference. Even if you all happen to be musicians with …read more (https://hackaday.com/2020/08/26/slack-off-from-home-with-a-networked-jam-session/)
This Geiger Counter has Few Parts
https://hackaday.com/2020/08/26/this-geiger-counter-has-few-parts/

With all the focus on biological problems, we might forget that sometimes it’s handy to know about radiation hazards, too. [Ryan Harrington] shows us how to make a Geiger counter with very few parts, and you can see the results in the video below.
The glut of surplus Russian tubes …read more (https://hackaday.com/2020/08/26/this-geiger-counter-has-few-parts/)
Tiny Robot Beetle Runs On Alcohol
https://hackaday.com/2020/08/26/tiny-robot-beetle-runs-on-alcohol/

Batteries have come a long way in the past few centuries, but pale in comparison to hydrocarbon fuels when it comes to energy density. When it comes to packing plenty of juice in a light, compact package, hydrocarbons are the way to go. Recently, researchers have begun to take advantage …read more (https://hackaday.com/2020/08/26/tiny-robot-beetle-runs-on-alcohol/)
Discrete-Logic UART Keeps 8-Bit TTL Computer Connected
https://hackaday.com/2020/08/26/discrete-logic-uart-keeps-8-bit-ttl-computer-connected/

Pity the poor TTL computer aficionado. It’s an obsession, really — using discrete logic chips to scratch-build a computer that would probably compare unfavorably to an 80s era 8-bit machine in terms of performance. And yet they still forge ahead with their breadboards full of chips and tangles of wire. …read more (https://hackaday.com/2020/08/26/discrete-logic-uart-keeps-8-bit-ttl-computer-connected/)
TMD-1 Makes Turing Machine Concepts Easy to Understand
https://hackaday.com/2020/08/27/tmd-1-makes-turing-machine-concepts-easy-to-understand/

For something that has been around since the 1930s and is so foundational to computer science, you’d think that the Turing machine, an abstraction for mechanical computation, would be easily understood. Making the abstract concepts easy to understand is what this Turning machine demonstrator aims to do.
The TMD-1 is …read more (https://hackaday.com/2020/08/27/tmd-1-makes-turing-machine-concepts-easy-to-understand/)
Tiny Raspberry Pi Mac Nails the Apple Aesthetic
https://hackaday.com/2020/08/27/tiny-raspberry-pi-mac-nails-the-apple-aesthetic/

We know that some in the audience will take issue with calling a Raspberry Pi in a 3D-printed case the “World’s Smallest iMac”, but you’ve got to admit, [Michael Pick] has certainly done a good job recreating the sleek look of the real hardware. While there might not be any …read more (https://hackaday.com/2020/08/27/tiny-raspberry-pi-mac-nails-the-apple-aesthetic/)
The Mini Console Revolution, And Why Hackers Passed Them By
https://hackaday.com/2020/08/27/the-mini-console-revolution-and-why-hackers-passed-them-by/

The Raspberry Pi was initially developed as an educational tool. With its bargain price and digital IO, it quickly became a hacker favorite. It also packed just enough power to serve as a compact emulation platform for anyone savvy enough to load up a few ROMs on an SD card. …read more (https://hackaday.com/2020/08/27/the-mini-console-revolution-and-why-hackers-passed-them-by/)
Mil-Spec Looks Without Defense Department Budget
https://hackaday.com/2020/08/27/mil-spec-looks-without-defense-department-budget/

While hackers and makers have a tendency to focus on functionality above all else, that doesn’t mean there isn’t room for some visual flair. A device that works well and looks good will always be more impressive than the bare bones approach, but the extra time and money it usually …read more (https://hackaday.com/2020/08/27/mil-spec-looks-without-defense-department-budget/)
VR Technology Helps Bring A Galaxy Far, Far Away To Our TV
https://hackaday.com/2020/08/27/vr-technology-helps-bring-a-galaxy-far-far-away-to-our-tv/

Virtual reality is usually an isolated individual experience very different from the shared group experience of a movie screen or even a living room TV. But those worlds of entertainment are more closely intertwined than most audiences are aware. Video game engines have been taking a growing role in film …read more (https://hackaday.com/2020/08/27/vr-technology-helps-bring-a-galaxy-far-far-away-to-our-tv/)
Simultaneous Soldering Station
https://hackaday.com/2020/08/27/simultaneous-soldering-station/

Soldering irons are a personal tool. Some folks need them on the cool side, and some like it hot. Getting it right takes some practice and experience, but when you find a tip and temp that works, you stick with it. [Riccardo Pittini] landed somewhere in the middle with his …read more (https://hackaday.com/2020/08/27/simultaneous-soldering-station/)
Print-in-Place Engine Aims to be the Next Benchy
https://hackaday.com/2020/08/27/print-in-place-engine-aims-to-be-the-next-benchy/

While there are many in the 3D-printing community who loudly and proudly proclaim never to have stooped to printing a 3DBenchy, there are far more who have turned a new printer loose on the venerable test model, just to see what it can do. But Benchy is getting a little …read more (https://hackaday.com/2020/08/27/print-in-place-engine-aims-to-be-the-next-benchy/)
Hands-On: BornHack 2020 Badge has 9×32 of Bling Fed by CircuitPython
https://hackaday.com/2020/08/27/hands-on-bornhack-2020-badge-has-9x32-of-bling-fed-by-circuitpython/

Despite widespread pandemic cancellations, BornHack still happened this year and they even managed to once again bring an electronic badge to all attendees. If you missed it, I’ve already published an overview of the hacker camp itself. Today let’s dig into the 2020 BornHack badge!
Designed by Thomas Flummer and …read more (https://hackaday.com/2020/08/27/hands-on-bornhack-2020-badge-has-9x32-of-bling-fed-by-circuitpython/)
Cold Tube Draws the Heat
https://hackaday.com/2020/08/27/cold-tube-draws-the-heat/

If you live anywhere near the tropics, air conditioning isn’t a luxury but a necessity. The problem however is that humid climates can cause conventional air conditioners to draw more power to dehumidify the air than it requires to just cool it, which increases the power needed to run the …read more (https://hackaday.com/2020/08/27/cold-tube-draws-the-heat/)
38 Years Later, The Atari 2600 Learns To Speak
https://hackaday.com/2020/08/27/38-years-later-the-atari-2600-learns-to-speak/

Back in the early 1980s, there was a certain fad in making your computer produce something resembling human speech. There were several hardware solutions to this, adding voices to everything from automated telephone systems to video game consoles, all the way to Steve Jobs using the gimmick to introduce Macintosh …read more (https://hackaday.com/2020/08/27/38-years-later-the-atari-2600-learns-to-speak/)
Over-Engineered Single Button Timer
https://hackaday.com/2020/08/28/over-engineered-single-button-timer/

Feature creep is typically something to be avoided, since watching a relatively simple project balloon into a rat’s nest of complexity often leads to ineffective, or even abandoned, projects. On the other hand, if you can maintain a tight focus, it’s not always a bad thing. [cbm80Amiga] shows us how …read more (https://hackaday.com/2020/08/28/over-engineered-single-button-timer/)
Open Hardware Laptop Built on Power PC ISA
https://hackaday.com/2020/08/28/open-hardware-laptop-built-on-power-pc-isa/

Since Apple switched to Intel chips in the mid-00s, the PowerPC chips from Motorola and the PowerPC Instruction Set Architecture (ISA) that they had been using largely fell by the wayside. While true that niche applications like supercomputing still use the Power ISA on other non-Apple hardware, the days of …read more (https://hackaday.com/2020/08/28/open-hardware-laptop-built-on-power-pc-isa/)
This Week in Security: XCode Infections, Freepik, and Crypto Fails
https://hackaday.com/2020/08/28/this-week-in-security-xcode-infections-freepik-and-crypto-fails/

There is a scenario that keep security gurus up at night: Malware that can detect software compilation and insert itself into the resulting binary. A new Mac malware, XCSSET (PDF), does just that, running whenever Xcode is used to build an application. Not only is there the danger of compiled …read more (https://hackaday.com/2020/08/28/this-week-in-security-xcode-infections-freepik-and-crypto-fails/)
Creating Kelvin Test Leads for Four-Wire Measurments
https://hackaday.com/2020/08/28/creating-kelvin-test-leads-for-four-wire-measurments/

[VoltLog] has a cheap Hantek LCR meter, but it only has two probes. The best resistance and impedance measurements, though, use four wires to improve accuracy. The first order of business was a custom PCB to fit into the connector of the meter, along with a 3D-printed case.
Using a …read more (https://hackaday.com/2020/08/28/creating-kelvin-test-leads-for-four-wire-measurments/)
Hackaday Podcast 082: DJ CNC, NFC Black Box, Sound of Keys, and Payin’ for 3D Prints
https://hackaday.com/2020/08/28/hackaday-podcast-082-dj-cnc-nfc-black-box-sound-of-keys-and-payin-for-3d-prints/

Hackaday editors Elliot Williams and Mike Szczys check in on the best hacks from the past week. All the buzz is the algorithm that can reverse engineer your house keys from the way they sound going into the lock. Cardboard construction goes extreme with an RC car build that’s beyond …read more (https://hackaday.com/2020/08/28/hackaday-podcast-082-dj-cnc-nfc-black-box-sound-of-keys-and-payin-for-3d-prints/)