A Minimal ESP8266 Digital Picture Frame
https://hackaday.com/2020/03/01/a-minimal-esp8266-digital-picture-frame/
Over the last few years, the price of a good digital picture frame has dropped to the point that we don’t often see DIY versions anymore. As much as we might hate to admit it, it’s hard to justify building something yourself when the economies of scale have made it …read more (https://hackaday.com/2020/03/01/a-minimal-esp8266-digital-picture-frame/)
https://hackaday.com/2020/03/01/a-minimal-esp8266-digital-picture-frame/
Over the last few years, the price of a good digital picture frame has dropped to the point that we don’t often see DIY versions anymore. As much as we might hate to admit it, it’s hard to justify building something yourself when the economies of scale have made it …read more (https://hackaday.com/2020/03/01/a-minimal-esp8266-digital-picture-frame/)
Generate Power as You Ride with a Bicycle Planar Alternator
https://hackaday.com/2020/03/02/generate-power-as-you-ride-with-a-bicycle-planar-alternator/
For most riders, bicycle lighting consists of an array of LED lamps and flashing gizmos, usually powered by lithium-ion batteries, or coin cells for the smaller ones. Some people though prefer to dispense with batteries and generate their own power, and that’s what [Thomas D] has done by fitting his …read more (https://hackaday.com/2020/03/02/generate-power-as-you-ride-with-a-bicycle-planar-alternator/)
https://hackaday.com/2020/03/02/generate-power-as-you-ride-with-a-bicycle-planar-alternator/
For most riders, bicycle lighting consists of an array of LED lamps and flashing gizmos, usually powered by lithium-ion batteries, or coin cells for the smaller ones. Some people though prefer to dispense with batteries and generate their own power, and that’s what [Thomas D] has done by fitting his …read more (https://hackaday.com/2020/03/02/generate-power-as-you-ride-with-a-bicycle-planar-alternator/)
ESP32 Rover With PCB Chassis is Ready to Roll
https://hackaday.com/2020/03/02/esp32-rover-with-pcb-chassis-is-ready-to-roll/
The microcontrollers are cheap, the sensors are cheap, even the motors are cheap. So why are all the good wheeled robotics platforms so expensive? [Dimitris Platis] wanted to develop an affordable platform for experimenting with rovers, but the cheap plastic chassis he was using gave him all sorts of problems. …read more (https://hackaday.com/2020/03/02/esp32-rover-with-pcb-chassis-is-ready-to-roll/)
https://hackaday.com/2020/03/02/esp32-rover-with-pcb-chassis-is-ready-to-roll/
The microcontrollers are cheap, the sensors are cheap, even the motors are cheap. So why are all the good wheeled robotics platforms so expensive? [Dimitris Platis] wanted to develop an affordable platform for experimenting with rovers, but the cheap plastic chassis he was using gave him all sorts of problems. …read more (https://hackaday.com/2020/03/02/esp32-rover-with-pcb-chassis-is-ready-to-roll/)
Project Rubicon: The NSA Secretly Sold Flawed Encryption for Decades
https://hackaday.com/2020/03/02/project-rubicon-the-nsa-secretly-sold-flawed-encryption-for-decades/
There have been a few moments in the past few years, when a conspiracy theory is suddenly demonstrated to be based in fact. Once upon a time, it was an absurd suggestion that the NSA had data taps in AT&T buildings across the country. Just like Snowden’s revelations confirmed those …read more (https://hackaday.com/2020/03/02/project-rubicon-the-nsa-secretly-sold-flawed-encryption-for-decades/)
https://hackaday.com/2020/03/02/project-rubicon-the-nsa-secretly-sold-flawed-encryption-for-decades/
There have been a few moments in the past few years, when a conspiracy theory is suddenly demonstrated to be based in fact. Once upon a time, it was an absurd suggestion that the NSA had data taps in AT&T buildings across the country. Just like Snowden’s revelations confirmed those …read more (https://hackaday.com/2020/03/02/project-rubicon-the-nsa-secretly-sold-flawed-encryption-for-decades/)
Giant Clock Made In the Nick of Time
https://hackaday.com/2020/03/02/giant-clock-made-in-the-nick-of-time/
When [tnjyoung] was asked to build a huge lighted clock for a high school theater’s production of Cinderella with only two weeks before opening night, he probably wished for a fairy godmother of his own to show up and do it for him. But he and his team pulled it …read more (https://hackaday.com/2020/03/02/giant-clock-made-in-the-nick-of-time/)
https://hackaday.com/2020/03/02/giant-clock-made-in-the-nick-of-time/
When [tnjyoung] was asked to build a huge lighted clock for a high school theater’s production of Cinderella with only two weeks before opening night, he probably wished for a fairy godmother of his own to show up and do it for him. But he and his team pulled it …read more (https://hackaday.com/2020/03/02/giant-clock-made-in-the-nick-of-time/)
On-Demand Manufacturing Hack Chat
https://hackaday.com/2020/03/02/on-demand-manufacturing-hack-chat/
Join us on Wednesday, March 4 at noon Pacific for the On-Demand Manufacturing Hack Chat with Dan Emery!
The classical recipe for starting a manufacturing enterprise is pretty straightforward: get an idea, attract investors, hire works, buy machines, put it all in a factory, and profit. Things have been this …read more (https://hackaday.com/2020/03/02/on-demand-manufacturing-hack-chat/)
https://hackaday.com/2020/03/02/on-demand-manufacturing-hack-chat/
Join us on Wednesday, March 4 at noon Pacific for the On-Demand Manufacturing Hack Chat with Dan Emery!
The classical recipe for starting a manufacturing enterprise is pretty straightforward: get an idea, attract investors, hire works, buy machines, put it all in a factory, and profit. Things have been this …read more (https://hackaday.com/2020/03/02/on-demand-manufacturing-hack-chat/)
The Last Scientific Calculator?
https://hackaday.com/2020/03/02/the-last-scientific-calculator/
There was a time when being an engineering student meant you had a sword. Well, really it was a slide rule hanging from your belt, but it sounds cooler to call it a sword. The slide rule sword gave way to calculators hanging from your belt loop, and for many …read more (https://hackaday.com/2020/03/02/the-last-scientific-calculator/)
https://hackaday.com/2020/03/02/the-last-scientific-calculator/
There was a time when being an engineering student meant you had a sword. Well, really it was a slide rule hanging from your belt, but it sounds cooler to call it a sword. The slide rule sword gave way to calculators hanging from your belt loop, and for many …read more (https://hackaday.com/2020/03/02/the-last-scientific-calculator/)
Scott Shawcroft Is Programming Game Boys With CircuitPython
https://hackaday.com/2020/03/02/scott-shawcroft-is-programming-game-boys-with-circuitpython/
Some people like to do things the hard way. Maybe they drive a manual transmission, or they bust out the wire wrap tool instead of a soldering iron, or they code in assembly to stay close to the machine. Doing things the hard way certainly has its merits, and we …read more (https://hackaday.com/2020/03/02/scott-shawcroft-is-programming-game-boys-with-circuitpython/)
https://hackaday.com/2020/03/02/scott-shawcroft-is-programming-game-boys-with-circuitpython/
Some people like to do things the hard way. Maybe they drive a manual transmission, or they bust out the wire wrap tool instead of a soldering iron, or they code in assembly to stay close to the machine. Doing things the hard way certainly has its merits, and we …read more (https://hackaday.com/2020/03/02/scott-shawcroft-is-programming-game-boys-with-circuitpython/)
This DIY Dynamometer Shows Just What A Motor Can Do
https://hackaday.com/2020/03/02/this-diy-dynamometer-shows-just-what-a-motor-can-do/
Back in high school, all the serious gearheads used to brag about two things: their drag strip tickets, and their dynamometer reports. The former showed how fast their muscle car could cover a quarter-mile, while the latter was documentation on how much power their carefully crafted machine could deliver. What …read more (https://hackaday.com/2020/03/02/this-diy-dynamometer-shows-just-what-a-motor-can-do/)
https://hackaday.com/2020/03/02/this-diy-dynamometer-shows-just-what-a-motor-can-do/
Back in high school, all the serious gearheads used to brag about two things: their drag strip tickets, and their dynamometer reports. The former showed how fast their muscle car could cover a quarter-mile, while the latter was documentation on how much power their carefully crafted machine could deliver. What …read more (https://hackaday.com/2020/03/02/this-diy-dynamometer-shows-just-what-a-motor-can-do/)
Multi-Band Receiver On A Chip Controlled By Arduino
https://hackaday.com/2020/03/02/multi-band-receiver-on-a-chip-controlled-by-arduino/
The Silicon Labs Si4735 is a single-chip solution for receiving AM, FM, and shortwave radio. With a bit of hacking, it even supports single sideband (SSB). All you’ve got to do is provide it with a suitable control interface, which [Ricardo Lima Caratti] has done with his recent project.
Using …read more (https://hackaday.com/2020/03/02/multi-band-receiver-on-a-chip-controlled-by-arduino/)
https://hackaday.com/2020/03/02/multi-band-receiver-on-a-chip-controlled-by-arduino/
The Silicon Labs Si4735 is a single-chip solution for receiving AM, FM, and shortwave radio. With a bit of hacking, it even supports single sideband (SSB). All you’ve got to do is provide it with a suitable control interface, which [Ricardo Lima Caratti] has done with his recent project.
Using …read more (https://hackaday.com/2020/03/02/multi-band-receiver-on-a-chip-controlled-by-arduino/)
Arduino Drives Astronomy Dome
https://hackaday.com/2020/03/02/arduino-drives-astronomy-dome/
The South Florida Science Center recently added a new ten-inch telescope and turned to [Andres Paris] and his brother to replace the hand-cranked dome door system. They turned to an Arduino along with some beefy motor drivers. You can see some videos of the beast in operation, below.
According to …read more (https://hackaday.com/2020/03/02/arduino-drives-astronomy-dome/)
https://hackaday.com/2020/03/02/arduino-drives-astronomy-dome/
The South Florida Science Center recently added a new ten-inch telescope and turned to [Andres Paris] and his brother to replace the hand-cranked dome door system. They turned to an Arduino along with some beefy motor drivers. You can see some videos of the beast in operation, below.
According to …read more (https://hackaday.com/2020/03/02/arduino-drives-astronomy-dome/)
Esper Makes Virtual Reality From Live Reality
https://hackaday.com/2020/03/02/esper-makes-virtual-reality-from-live-reality/
There’s a scene in Bladerunner where Deckard puts a photograph in a magical machine that lets him zoom and enhance without limit, and even see around obstacles. In today’s climate, this is starting to seem more plausible, what with all the cameras everywhere. [Jasper van Loenen] explores this concept in …read more (https://hackaday.com/2020/03/02/esper-makes-virtual-reality-from-live-reality/)
https://hackaday.com/2020/03/02/esper-makes-virtual-reality-from-live-reality/
There’s a scene in Bladerunner where Deckard puts a photograph in a magical machine that lets him zoom and enhance without limit, and even see around obstacles. In today’s climate, this is starting to seem more plausible, what with all the cameras everywhere. [Jasper van Loenen] explores this concept in …read more (https://hackaday.com/2020/03/02/esper-makes-virtual-reality-from-live-reality/)
Evolution of a Backpack VR System
https://hackaday.com/2020/03/03/evolution-of-a-backpack-vr-system/
Persistence is what a hacker needs to make it to their goal. That’s exactly what it took for [Erik] to make an untethered VR backpack system.
Starting way back in the Spring of 2019, [Erik] began working on an untethered VR system. Sure, the Rift Quest was coming out, but …read more (https://hackaday.com/2020/03/03/evolution-of-a-backpack-vr-system/)
https://hackaday.com/2020/03/03/evolution-of-a-backpack-vr-system/
Persistence is what a hacker needs to make it to their goal. That’s exactly what it took for [Erik] to make an untethered VR backpack system.
Starting way back in the Spring of 2019, [Erik] began working on an untethered VR system. Sure, the Rift Quest was coming out, but …read more (https://hackaday.com/2020/03/03/evolution-of-a-backpack-vr-system/)
A Honeycomb Patching Robot Powered by Arduino
https://hackaday.com/2020/03/03/a-honeycomb-patching-robot-powered-by-arduino/
No, it’s not the kind of honeycomb you’re probably thinking of. We’re talking about the lightweight panels commonly used in aerospace applications. Apparently they’re rather prone to dents and other damage during handling, so Boeing teamed up with students from the California State University to come up with a way …read more (https://hackaday.com/2020/03/03/a-honeycomb-patching-robot-powered-by-arduino/)
https://hackaday.com/2020/03/03/a-honeycomb-patching-robot-powered-by-arduino/
No, it’s not the kind of honeycomb you’re probably thinking of. We’re talking about the lightweight panels commonly used in aerospace applications. Apparently they’re rather prone to dents and other damage during handling, so Boeing teamed up with students from the California State University to come up with a way …read more (https://hackaday.com/2020/03/03/a-honeycomb-patching-robot-powered-by-arduino/)
Expanding, and Eventually Replacing, the International Space Station
https://hackaday.com/2020/03/03/expanding-and-eventually-replacing-the-international-space-station/
Aboard the International Space Station (ISS), humanity has managed to maintain an uninterrupted foothold in low Earth orbit for just shy of 20 years. There are people reading these words who have had the ISS orbiting overhead for their entire lives, the first generation born into a truly spacefaring civilization. …read more (https://hackaday.com/2020/03/03/expanding-and-eventually-replacing-the-international-space-station/)
https://hackaday.com/2020/03/03/expanding-and-eventually-replacing-the-international-space-station/
Aboard the International Space Station (ISS), humanity has managed to maintain an uninterrupted foothold in low Earth orbit for just shy of 20 years. There are people reading these words who have had the ISS orbiting overhead for their entire lives, the first generation born into a truly spacefaring civilization. …read more (https://hackaday.com/2020/03/03/expanding-and-eventually-replacing-the-international-space-station/)
Just When You Thought There Was Nothing New In Nixie Clocks…
https://hackaday.com/2020/03/03/just-when-you-thought-there-was-nothing-new-in-nixie-clocks/
Nixie clocks have become such a staple in our community as to have become mundane. They’re pretty, but show us something new! It seems [Marcin Saj] has done just that with his offering, because with a bank of 18 IN-2 Nixie tubes he’s telling the time – but in …read more (https://hackaday.com/2020/03/03/just-when-you-thought-there-was-nothing-new-in-nixie-clocks/)
https://hackaday.com/2020/03/03/just-when-you-thought-there-was-nothing-new-in-nixie-clocks/
Nixie clocks have become such a staple in our community as to have become mundane. They’re pretty, but show us something new! It seems [Marcin Saj] has done just that with his offering, because with a bank of 18 IN-2 Nixie tubes he’s telling the time – but in …read more (https://hackaday.com/2020/03/03/just-when-you-thought-there-was-nothing-new-in-nixie-clocks/)
Inputs of Interest: My First Aggressively Ergonomic Keyboard
https://hackaday.com/2020/03/03/inputs-of-interest-my-first-aggressively-ergonomic-keyboard/
Ever since my RSI surgery, I’ve had to resort to using what I call my compromise keyboard — a wireless rubber dome affair with a gentle curvature to the keys. It’s far from perfect, but it has allowed me to continue to type when I thought I wouldn’t be able …read more (https://hackaday.com/2020/03/03/inputs-of-interest-my-first-aggressively-ergonomic-keyboard/)
https://hackaday.com/2020/03/03/inputs-of-interest-my-first-aggressively-ergonomic-keyboard/
Ever since my RSI surgery, I’ve had to resort to using what I call my compromise keyboard — a wireless rubber dome affair with a gentle curvature to the keys. It’s far from perfect, but it has allowed me to continue to type when I thought I wouldn’t be able …read more (https://hackaday.com/2020/03/03/inputs-of-interest-my-first-aggressively-ergonomic-keyboard/)
Train All the Things Contest Update
https://hackaday.com/2020/03/03/train-all-the-things-contest-update/
Back in January when we announced the Train All the Things contest, we weren’t sure what kind of entries we’d see. Machine learning is a huge and rapidly evolving field, after all, and the traditional barriers that computationally intensive processes face have been falling just as rapidly. Constraints are fading …read more (https://hackaday.com/2020/03/03/train-all-the-things-contest-update/)
https://hackaday.com/2020/03/03/train-all-the-things-contest-update/
Back in January when we announced the Train All the Things contest, we weren’t sure what kind of entries we’d see. Machine learning is a huge and rapidly evolving field, after all, and the traditional barriers that computationally intensive processes face have been falling just as rapidly. Constraints are fading …read more (https://hackaday.com/2020/03/03/train-all-the-things-contest-update/)
New Depths For iMac Repair
https://hackaday.com/2020/03/03/new-depths-for-imac-repair/
There’s not much economic sense in fixing a decade-old desktop computer, especially when it’s the fancy type with the screen integrated into the body of the computer, and the screen is the thing that’s broken. Luckily for [JnsBn] aka [BEAN] the computer in question was still functional with a second …read more (https://hackaday.com/2020/03/03/new-depths-for-imac-repair/)
https://hackaday.com/2020/03/03/new-depths-for-imac-repair/
There’s not much economic sense in fixing a decade-old desktop computer, especially when it’s the fancy type with the screen integrated into the body of the computer, and the screen is the thing that’s broken. Luckily for [JnsBn] aka [BEAN] the computer in question was still functional with a second …read more (https://hackaday.com/2020/03/03/new-depths-for-imac-repair/)
DIY Large Format Book Press Puts on the Pressure
https://hackaday.com/2020/03/03/diy-large-format-book-press-puts-on-the-pressure/
For those in the audience who aren’t well versed in wrangling dead trees, a large press with a lot of clamping pressure can be used for binding books or printing. It can even be used to squeeze the water out of homemade paper. It’s an important tool for anyone looking …read more (https://hackaday.com/2020/03/03/diy-large-format-book-press-puts-on-the-pressure/)
https://hackaday.com/2020/03/03/diy-large-format-book-press-puts-on-the-pressure/
For those in the audience who aren’t well versed in wrangling dead trees, a large press with a lot of clamping pressure can be used for binding books or printing. It can even be used to squeeze the water out of homemade paper. It’s an important tool for anyone looking …read more (https://hackaday.com/2020/03/03/diy-large-format-book-press-puts-on-the-pressure/)