Hackaday
1.06K subscribers
18.3K photos
52.3K links
New posts from hackaday.com
Download Telegram
The Flexible Permanence of Copper Tape Circuits
https://hackaday.com/2020/01/15/the-flexible-permanence-of-copper-tape-circuits/

Somewhere between shoving components into a breadboard temporarily and committing them to a piece of protoboard or a PCB lies the copper tape method. This flexible Manhattan-style method of circuitry formed the basis for [Bunnie Huang]’s Chibitronics startup, and has since inspired many to stop etching boards and start fetching …read more (https://hackaday.com/2020/01/15/the-flexible-permanence-of-copper-tape-circuits/)
A Safer, Self-Healing Polymer Battery
https://hackaday.com/2020/01/15/a-safer-self-healing-polymer-battery/

Lithium-ion batteries are notorious for spontaneously combusting, with seemingly so many ways that it can be triggered. While they are a compact and relatively affordable rechargeable battery for hobbyists, damage to the batteries can be dangerous and lead to fires.
Several engineers from the University of Illinois have developed a …read more (https://hackaday.com/2020/01/15/a-safer-self-healing-polymer-battery/)
The RFI Hunter: Looking for Noise in All the Wrong Places
https://hackaday.com/2020/01/15/the-rfi-hunter-looking-for-noise-in-all-the-wrong-places/

Next time you get a new device and excitedly unwrap its little poly-wrapped power supply, remember this: for every switch-mode power supply you plug in, an amateur radio operator sheds a tear. A noisy, broadband, harmonic-laden tear.
The degree to which this fact disturbs you very much depends upon which …read more (https://hackaday.com/2020/01/15/the-rfi-hunter-looking-for-noise-in-all-the-wrong-places/)
A Behind the Scenes Look at Small Scale Production
https://hackaday.com/2020/01/16/a-behind-the-scenes-look-at-small-scale-production/

Back in 2013, [Karl Lautman] successfully got his kinetic sculpture Primer funded on Kickstarter. As the name implies, you press the big red button on the front of the device, and the mechanical counter at the top will click over to a new prime number for your viewing pleasure. Not …read more (https://hackaday.com/2020/01/16/a-behind-the-scenes-look-at-small-scale-production/)
Turn By Turn Driving Directions From A Turntable
https://hackaday.com/2020/01/16/turn-by-turn-driving-directions-from-a-turntable/

Many of us now carry a phone that can give us detailed directions from where we are to a destination of our choosing. This luxury became commonplace over the last decade plus, replacing the pen-and-paper solution of consulting a map to plan a trip and writing down steps along the …read more (https://hackaday.com/2020/01/16/turn-by-turn-driving-directions-from-a-turntable/)
Car Alternators Make Great Electric Motors; Here’s How
https://hackaday.com/2020/01/16/car-alternators-make-great-electric-motors-heres-how/

The humble automotive alternator hides an interesting secret. Known as the part that converts power from internal combustion into the electricity needed to run everything else, they can also themselves be used as an electric motor.
These devices almost always take the form of a 3-phase alternator with the magnetic …read more (https://hackaday.com/2020/01/16/car-alternators-make-great-electric-motors-heres-how/)
Analyzing CNC Tool Chatter with Audacity
https://hackaday.com/2020/01/16/analyzing-cnc-tool-chatter-with-audacity/

When you’re operating a machine that’s powerful enough to tear a solid metal block to shards, it pays to be attentive to details. The angular momentum of the spindle of a modern CNC machine can be trouble if it gets unleashed the wrong way, which is why generations of machinists …read more (https://hackaday.com/2020/01/16/analyzing-cnc-tool-chatter-with-audacity/)
A SpaceX Falcon 9 will Blow Up Very Soon, and That’s OK
https://hackaday.com/2020/01/16/a-spacex-falcon-9-will-blow-up-very-soon-and-thats-ok/

They say you can’t make an omelette without breaking a few eggs, and there are few fields where this idiom is better exemplified than rocketry. It’s a forgone conclusion that when you develop a new booster, at least a few test articles are going to be destroyed in the process. …read more (https://hackaday.com/2020/01/16/a-spacex-falcon-9-will-blow-up-very-soon-and-thats-ok/)
A Strange Display Gives Up Its Secrets
https://hackaday.com/2020/01/16/a-strange-display-gives-up-its-secrets/

Providing a display for a project in 2020 is something of a done deal. Standard interfaces and off-the-shelf libraries for easily available and cheap modules mean that the hardest choice you’ll have to make about a display will probably relate to its colour. Three decades ago though this was not …read more (https://hackaday.com/2020/01/16/a-strange-display-gives-up-its-secrets/)
Motorized Inline Skates Run On Makita Power
https://hackaday.com/2020/01/16/motorized-inline-skates-run-on-makita-power/

Inline skates can be fun, but like most wheeled contraptions, they’re even better when motorized. With just such a goal in mind, [The Real Life Guys] decided to whip up a set of powered skates, running on Makita power!
To get power to the ground, the third wheel on each …read more (https://hackaday.com/2020/01/16/motorized-inline-skates-run-on-makita-power/)
74-Series Clock Gets A MEMS Heart
https://hackaday.com/2020/01/16/74-series-clock-gets-a-mems-heart/

[Erik van Zijst] has had a long career as a programmer, but lacked an understanding of what was happening at a bare metal level. After building a few logic gates out of transistors to get a feel for electronics, he set out to build a working clock using 74-series logic. …read more (https://hackaday.com/2020/01/16/74-series-clock-gets-a-mems-heart/)
These Bit Twiddling Tricks Will Make Your Coworkers Hate You
https://hackaday.com/2020/01/16/these-bit-twiddling-tricks-will-make-your-coworkers-hate-you/

In the embedded world, twiddling a few bits is expected behavior. Firmware is far enough down the stack that the author may care about the number of bits and bytes used, or needs to work with registers directly to make the machine dance. Usually these operations are confined to the …read more (https://hackaday.com/2020/01/16/these-bit-twiddling-tricks-will-make-your-coworkers-hate-you/)
A Simple App Controlled Door Lock
https://hackaday.com/2020/01/16/a-simple-app-controlled-door-lock/

[Adnan.R.Khan] had a sliding door latch plus an Arduino, and hacked together this cool but simple app controlled door lock.
Mechanically the lock consists of a Solarbotics GM3 motor, some Meccano, and a servo arm. A string is tied between two pulleys and looped around the slide of a barrel …read more (https://hackaday.com/2020/01/16/a-simple-app-controlled-door-lock/)
Oceanography As Open As the Seas
https://hackaday.com/2020/01/17/oceanography-as-open-as-the-seas/

With Earth in the throes of climate change and no suitable Planet B lined up just yet, oceanography is as important now as it has ever been. And yet, the instruments relied upon for decades to test ocean conditions are holding steady within the range of expensive to prohibitively expensive. …read more (https://hackaday.com/2020/01/17/oceanography-as-open-as-the-seas/)
A Water Cooled Gaming PC You Can Take With You
https://hackaday.com/2020/01/17/a-water-cooled-gaming-pc-you-can-take-with-you/

Have you ever been stuck in a hotel room wishing you brought your VR-capable gaming PC along with you? Well [thegarbz] certainly has, which was the inspiration for this absolutely gorgeous mobile rig affectionately known as “The Nuclear Football” that brings console-level portability to those who count themselves among the …read more (https://hackaday.com/2020/01/17/a-water-cooled-gaming-pc-you-can-take-with-you/)
This Week in Security: Windows 10 Apocalypse, Paypal Problems, and Cablehaunt
https://hackaday.com/2020/01/17/this-week-in-security-windows-10-apocalypse-paypal-problems-and-cablehaunt/

Nicely timed to drop on the final day of Windows 7 support, Windows 10 received a fix to an extremely serious flaw in crypt32.dll. This flaw was reported by the good guys at the NSA. (We know it was the good guys, because they reported it rather than used …read more (https://hackaday.com/2020/01/17/this-week-in-security-windows-10-apocalypse-paypal-problems-and-cablehaunt/)
Magic Acrylic Makes This Ring Stand Out
https://hackaday.com/2020/01/17/magic-acrylic-makes-this-ring-stand-out/

LEDs look great no matter how you use them, but sometimes you want to hide them from direct view. [Charlyn] found a great way to do that, using a special material designed just for the purpose.
[Charlyn] built a ring as a piece of fashion jewelry, hooking up a Gemma …read more (https://hackaday.com/2020/01/17/magic-acrylic-makes-this-ring-stand-out/)
Hackaday Podcast 050: Counterfeit Chips, Servo Kalimba, Resistor Colors, Pi Emulation, and SED Maze Solver
https://hackaday.com/2020/01/17/hackaday-podcast-050-counterfeit-chips-servo-kalimba-resistor-colors-pi-emulation-and-sed-maze-solver/


Hackaday editors Elliot Williams and Mike Szczys work their way through a dizzying maze of great hacks this week, bringing you along for the ride. We take a look at simplifying home automation with Node-RED and marvel at the misuse of the SED — Linux’s stream editor for filtering and …read more (https://hackaday.com/2020/01/17/hackaday-podcast-050-counterfeit-chips-servo-kalimba-resistor-colors-pi-emulation-and-sed-maze-solver/)
Who Invented the Mouse? Are You Sure?
https://hackaday.com/2020/01/17/who-invented-the-mouse-are-you-sure/

If you ask most people who invented the mouse, they won’t know. Those that do know, will say that Doug Englebart did. In 1964 he had a box with two wheels that worked like a modern mouse as part of his work at Stanford Research Institute. There is a famous …read more (https://hackaday.com/2020/01/17/who-invented-the-mouse-are-you-sure/)
Jen Costillo Explains Why Hackers Thrive in a Recession
https://hackaday.com/2020/01/17/jen-costillo-explains-why-hackers-thrive-in-a-recession/

If you haven’t noticed, this is an absolutely fantastic time to be a hacker. The components are cheap, the software is usually free, and there’s so much information floating around online about how to pull it all together that even beginners can produce incredible projects their first time out of …read more (https://hackaday.com/2020/01/17/jen-costillo-explains-why-hackers-thrive-in-a-recession/)