Homebuilt Onewheel Uses Hoverboard Parts
https://hackaday.com/2020/03/08/homebuilt-onewheel-uses-hoverboard-parts/
Since Back To The Future II first screened back in 1989, people have been waiting for hoverboards to become reality. Instead, we got a dangerous two-wheeled contraption going by the same name. Wanting something a little cooler, [Bartek Plonek] decided to convert his to a one-wheel design. (Video, embedded below.) …read more (https://hackaday.com/2020/03/08/homebuilt-onewheel-uses-hoverboard-parts/)
https://hackaday.com/2020/03/08/homebuilt-onewheel-uses-hoverboard-parts/
Since Back To The Future II first screened back in 1989, people have been waiting for hoverboards to become reality. Instead, we got a dangerous two-wheeled contraption going by the same name. Wanting something a little cooler, [Bartek Plonek] decided to convert his to a one-wheel design. (Video, embedded below.) …read more (https://hackaday.com/2020/03/08/homebuilt-onewheel-uses-hoverboard-parts/)
Don’t Scrape Magnet Wire, Do This Instead
https://hackaday.com/2020/03/09/dont-scrape-magnet-wire-do-this-instead/
[Tom] doesn’t much like breadboarding. He prefers to wire up prototypes with perfboard and solder point-to-point with enameled magnet wire. That may sound troublesome to some of you, but [Tom] has come up with a few tips to make prototyping with perfboard and magnet wire easier and more effective, and …read more (https://hackaday.com/2020/03/09/dont-scrape-magnet-wire-do-this-instead/)
https://hackaday.com/2020/03/09/dont-scrape-magnet-wire-do-this-instead/
[Tom] doesn’t much like breadboarding. He prefers to wire up prototypes with perfboard and solder point-to-point with enameled magnet wire. That may sound troublesome to some of you, but [Tom] has come up with a few tips to make prototyping with perfboard and magnet wire easier and more effective, and …read more (https://hackaday.com/2020/03/09/dont-scrape-magnet-wire-do-this-instead/)
See the Damage 250-Pound Combat Robots Get
https://hackaday.com/2020/03/09/see-the-damage-250-pound-combat-robots-get/
Combat robots have been a thing for a while, but we don’t normally get a close look at the end results of the sort of damage they can both take and deal out. [Raymond Ma] spent time helping out with season four of BattleBots and wrote about the experience, as …read more (https://hackaday.com/2020/03/09/see-the-damage-250-pound-combat-robots-get/)
https://hackaday.com/2020/03/09/see-the-damage-250-pound-combat-robots-get/
Combat robots have been a thing for a while, but we don’t normally get a close look at the end results of the sort of damage they can both take and deal out. [Raymond Ma] spent time helping out with season four of BattleBots and wrote about the experience, as …read more (https://hackaday.com/2020/03/09/see-the-damage-250-pound-combat-robots-get/)
The Legacy of One of Science’s Brightest Stars: Freeman Dyson
https://hackaday.com/2020/03/09/the-legacy-of-one-of-sciences-brightest-stars-freeman-dyson/
Of the many well-known names in science, few have been as reluctant to stick to one particular field as Freeman John Dyson. Born in the UK in 1923, he showed a great interest in mathematics and related fields even as a child. By the time he was 15 he had …read more (https://hackaday.com/2020/03/09/the-legacy-of-one-of-sciences-brightest-stars-freeman-dyson/)
https://hackaday.com/2020/03/09/the-legacy-of-one-of-sciences-brightest-stars-freeman-dyson/
Of the many well-known names in science, few have been as reluctant to stick to one particular field as Freeman John Dyson. Born in the UK in 1923, he showed a great interest in mathematics and related fields even as a child. By the time he was 15 he had …read more (https://hackaday.com/2020/03/09/the-legacy-of-one-of-sciences-brightest-stars-freeman-dyson/)
John Deere And Nebraska’s Right To Repair, The Aftermath Of A Failed Piece Of Legislation
https://hackaday.com/2020/03/09/john-deere-and-nebraskas-right-to-repair-the-aftermath-of-a-failed-piece-of-legislation/
For the past few years now we’ve covered a long-running battle between American farmers and the manufacturers of their farm machinery, over their right to repair, with particular focus on the agricultural giant John Deere. The manufacturer of the familiar green and yellow machinery that lies in the heart and …read more (https://hackaday.com/2020/03/09/john-deere-and-nebraskas-right-to-repair-the-aftermath-of-a-failed-piece-of-legislation/)
https://hackaday.com/2020/03/09/john-deere-and-nebraskas-right-to-repair-the-aftermath-of-a-failed-piece-of-legislation/
For the past few years now we’ve covered a long-running battle between American farmers and the manufacturers of their farm machinery, over their right to repair, with particular focus on the agricultural giant John Deere. The manufacturer of the familiar green and yellow machinery that lies in the heart and …read more (https://hackaday.com/2020/03/09/john-deere-and-nebraskas-right-to-repair-the-aftermath-of-a-failed-piece-of-legislation/)
PCB Finishes Hack Chat
https://hackaday.com/2020/03/09/pcb-finishes-hack-chat/
Join us on Wednesday, March 11 at noon Pacific for the PCB Finishes Hack Chat with Mark Hughes and Elijah Gracia!
There’s no way to overestimate the degree to which the invention of the printed circuit board revolutionized electronics. What was once the work of craftspeople weaving circuits together with …read more (https://hackaday.com/2020/03/09/pcb-finishes-hack-chat/)
https://hackaday.com/2020/03/09/pcb-finishes-hack-chat/
Join us on Wednesday, March 11 at noon Pacific for the PCB Finishes Hack Chat with Mark Hughes and Elijah Gracia!
There’s no way to overestimate the degree to which the invention of the printed circuit board revolutionized electronics. What was once the work of craftspeople weaving circuits together with …read more (https://hackaday.com/2020/03/09/pcb-finishes-hack-chat/)
Dexter Robot Arm Embraces New Manufacturing with First Micro-Factory
https://hackaday.com/2020/03/09/dexter-robot-arm-embraces-new-manufacturing-with-first-micro-factory/
Haddington Dynamics, the company behind the Dexter robot arm that won the 2018 Hackaday Prize, has opened its first microfactory to build robot arms for Australia and Southeast Asia.
You may remember that the combination of Dexter’s makeup and capabilities are what let it stand out among robotics projects. The …read more (https://hackaday.com/2020/03/09/dexter-robot-arm-embraces-new-manufacturing-with-first-micro-factory/)
https://hackaday.com/2020/03/09/dexter-robot-arm-embraces-new-manufacturing-with-first-micro-factory/
Haddington Dynamics, the company behind the Dexter robot arm that won the 2018 Hackaday Prize, has opened its first microfactory to build robot arms for Australia and Southeast Asia.
You may remember that the combination of Dexter’s makeup and capabilities are what let it stand out among robotics projects. The …read more (https://hackaday.com/2020/03/09/dexter-robot-arm-embraces-new-manufacturing-with-first-micro-factory/)
Fear of Potato Chips: Samy Kamkar’s Side-Channel Attack Roundup
https://hackaday.com/2020/03/09/fear-of-potato-chips-samy-kamkars-side-channel-attack-roundup/
What do potato chips and lost car keys have in common? On the surface, it would seem not much, unless you somehow managed to lose your keys in a bag of chips, which would be embarrassing enough that you’d likely never speak of it. But there is a surprising link …read more (https://hackaday.com/2020/03/09/fear-of-potato-chips-samy-kamkars-side-channel-attack-roundup/)
https://hackaday.com/2020/03/09/fear-of-potato-chips-samy-kamkars-side-channel-attack-roundup/
What do potato chips and lost car keys have in common? On the surface, it would seem not much, unless you somehow managed to lose your keys in a bag of chips, which would be embarrassing enough that you’d likely never speak of it. But there is a surprising link …read more (https://hackaday.com/2020/03/09/fear-of-potato-chips-samy-kamkars-side-channel-attack-roundup/)
Wood-Turning A Bladeless Fan
https://hackaday.com/2020/03/09/wood-turning-a-bladeless-fan/
It’s a simple enough premise: to make a Dyson-style bladeless fan out of wood. The execution of the finished fan, done and filmed by [Neil] from Pask Makes on YouTube, is however spectacular. Using nothing but scrap wood from a chopping board business local to him, he’s made the entire …read more (https://hackaday.com/2020/03/09/wood-turning-a-bladeless-fan/)
https://hackaday.com/2020/03/09/wood-turning-a-bladeless-fan/
It’s a simple enough premise: to make a Dyson-style bladeless fan out of wood. The execution of the finished fan, done and filmed by [Neil] from Pask Makes on YouTube, is however spectacular. Using nothing but scrap wood from a chopping board business local to him, he’s made the entire …read more (https://hackaday.com/2020/03/09/wood-turning-a-bladeless-fan/)
3D Printed Tooling Punches Above Its Weight With Added Hardware
https://hackaday.com/2020/03/09/3d-printed-tooling-punches-above-its-weight-with-added-hardware/
Reddit user [thetelltalehart] has been making brake press tooling with 3D printed PLA, and recently shared an interesting picture of a hybrid brake press punch, shown here on the right, in blue.
In a press, material such as sheet metal is formed into a shape by forcing the material around …read more (https://hackaday.com/2020/03/09/3d-printed-tooling-punches-above-its-weight-with-added-hardware/)
https://hackaday.com/2020/03/09/3d-printed-tooling-punches-above-its-weight-with-added-hardware/
Reddit user [thetelltalehart] has been making brake press tooling with 3D printed PLA, and recently shared an interesting picture of a hybrid brake press punch, shown here on the right, in blue.
In a press, material such as sheet metal is formed into a shape by forcing the material around …read more (https://hackaday.com/2020/03/09/3d-printed-tooling-punches-above-its-weight-with-added-hardware/)
A Reminder Not To Touch Your Face
https://hackaday.com/2020/03/09/a-reminder-not-to-touch-your-face/
In 2020, the world is focused on the rampant spread of a new virus by the name of COVID-19. Like many infectious diseases, transmission can be reduced by good hygiene practices. To help in the fight, [Nick Bild] threw together a device he calls Sentinel.
The concept is simple. Reduce …read more (https://hackaday.com/2020/03/09/a-reminder-not-to-touch-your-face/)
https://hackaday.com/2020/03/09/a-reminder-not-to-touch-your-face/
In 2020, the world is focused on the rampant spread of a new virus by the name of COVID-19. Like many infectious diseases, transmission can be reduced by good hygiene practices. To help in the fight, [Nick Bild] threw together a device he calls Sentinel.
The concept is simple. Reduce …read more (https://hackaday.com/2020/03/09/a-reminder-not-to-touch-your-face/)
Divvy Out The Crypto With This Physical Bitcoin Faucet
https://hackaday.com/2020/03/09/divvy-out-the-crypto-with-this-physical-bitcoin-faucet/
For those unfamiliar with the term, a “Bitcoin Faucet” is usually used as an incentive in software that wants your attention. Complete a captcha or look at and advertisement and you get one millionth of a BTC, that sort of thing. You’re never going to get rich off of one …read more (https://hackaday.com/2020/03/09/divvy-out-the-crypto-with-this-physical-bitcoin-faucet/)
https://hackaday.com/2020/03/09/divvy-out-the-crypto-with-this-physical-bitcoin-faucet/
For those unfamiliar with the term, a “Bitcoin Faucet” is usually used as an incentive in software that wants your attention. Complete a captcha or look at and advertisement and you get one millionth of a BTC, that sort of thing. You’re never going to get rich off of one …read more (https://hackaday.com/2020/03/09/divvy-out-the-crypto-with-this-physical-bitcoin-faucet/)
The Best Voltage And Current Reference This Side Of A Test Lab
https://hackaday.com/2020/03/10/the-best-voltage-and-current-reference-this-side-of-a-test-lab/
When you measure a voltage, how do you know that your measurement is correct? Because your multimeter says so, of course! But how can you trust your multimeter to give the right reading? Calibration of instruments is something we often trust blindly without really thinking about, but it’s not always …read more (https://hackaday.com/2020/03/10/the-best-voltage-and-current-reference-this-side-of-a-test-lab/)
https://hackaday.com/2020/03/10/the-best-voltage-and-current-reference-this-side-of-a-test-lab/
When you measure a voltage, how do you know that your measurement is correct? Because your multimeter says so, of course! But how can you trust your multimeter to give the right reading? Calibration of instruments is something we often trust blindly without really thinking about, but it’s not always …read more (https://hackaday.com/2020/03/10/the-best-voltage-and-current-reference-this-side-of-a-test-lab/)
Solar Panel Keeps Car Battery Topped Off Through OBD-II Port
https://hackaday.com/2020/03/10/solar-panel-keeps-car-battery-topped-off-through-obd-ii-port/
Up until the 1980s or so, a mechanic could check for shorts in a car’s electrical system by looking for sparks while removing the battery terminal with everything turned off in the car. That stopped being possible when cars started getting always-on devices, and as [Kerry Wong] learned, these phantom …read more (https://hackaday.com/2020/03/10/solar-panel-keeps-car-battery-topped-off-through-obd-ii-port/)
https://hackaday.com/2020/03/10/solar-panel-keeps-car-battery-topped-off-through-obd-ii-port/
Up until the 1980s or so, a mechanic could check for shorts in a car’s electrical system by looking for sparks while removing the battery terminal with everything turned off in the car. That stopped being possible when cars started getting always-on devices, and as [Kerry Wong] learned, these phantom …read more (https://hackaday.com/2020/03/10/solar-panel-keeps-car-battery-topped-off-through-obd-ii-port/)
How To Get Into Cars: Handling Mods
https://hackaday.com/2020/03/10/how-to-get-into-cars-handling-mods/
As a budding automotive enthusiast, you finally took the plunge and scored yourself a sweet project car. After going through it from top to toe, you’ve done your basic maintenance and it’s now running like a top. Now you’re getting comfortable, you’ve set your sights on turning your humble ride …read more (https://hackaday.com/2020/03/10/how-to-get-into-cars-handling-mods/)
https://hackaday.com/2020/03/10/how-to-get-into-cars-handling-mods/
As a budding automotive enthusiast, you finally took the plunge and scored yourself a sweet project car. After going through it from top to toe, you’ve done your basic maintenance and it’s now running like a top. Now you’re getting comfortable, you’ve set your sights on turning your humble ride …read more (https://hackaday.com/2020/03/10/how-to-get-into-cars-handling-mods/)
Bolts, Brass, and Machining Chops Make Up This Tiny Combination Safe
https://hackaday.com/2020/03/10/bolts-brass-and-machining-chops-make-up-this-tiny-combination-safe/
Another day, another video that seriously makes us doubt whether eschewing the purchase of a lathe in favor of feeding the family is a value proposition. This time, [Maker B] shows us what the queen of machine tools can do by turning a couple of bolts into a miniature safe. …read more (https://hackaday.com/2020/03/10/bolts-brass-and-machining-chops-make-up-this-tiny-combination-safe/)
https://hackaday.com/2020/03/10/bolts-brass-and-machining-chops-make-up-this-tiny-combination-safe/
Another day, another video that seriously makes us doubt whether eschewing the purchase of a lathe in favor of feeding the family is a value proposition. This time, [Maker B] shows us what the queen of machine tools can do by turning a couple of bolts into a miniature safe. …read more (https://hackaday.com/2020/03/10/bolts-brass-and-machining-chops-make-up-this-tiny-combination-safe/)
EU Duty Changes, A Whole VAT Of Trouble For Hackers?
https://hackaday.com/2020/03/10/eu-duty-changes-a-whole-vat-of-trouble-for-hackers/
It could be said that there are a number of factors behind the explosion of creativity in our community of hardware hackers over the last couple of decades, but one in particular that is beyond doubt is the ease with which it has been possible to import small orders from …read more (https://hackaday.com/2020/03/10/eu-duty-changes-a-whole-vat-of-trouble-for-hackers/)
https://hackaday.com/2020/03/10/eu-duty-changes-a-whole-vat-of-trouble-for-hackers/
It could be said that there are a number of factors behind the explosion of creativity in our community of hardware hackers over the last couple of decades, but one in particular that is beyond doubt is the ease with which it has been possible to import small orders from …read more (https://hackaday.com/2020/03/10/eu-duty-changes-a-whole-vat-of-trouble-for-hackers/)
Forming Sheet Metal Parts with 3D Printed Dies
https://hackaday.com/2020/03/10/forming-sheet-metal-parts-with-3d-printed-dies/
Using 3D printed forms to bend sheet metal isn’t exactly new. We’ve seen several people create custom dies for their brakes, and the results have shown the concept has merit for small-scale production. But that’s usually where the process ends. A bend here or there is one thing, but the …read more (https://hackaday.com/2020/03/10/forming-sheet-metal-parts-with-3d-printed-dies/)
https://hackaday.com/2020/03/10/forming-sheet-metal-parts-with-3d-printed-dies/
Using 3D printed forms to bend sheet metal isn’t exactly new. We’ve seen several people create custom dies for their brakes, and the results have shown the concept has merit for small-scale production. But that’s usually where the process ends. A bend here or there is one thing, but the …read more (https://hackaday.com/2020/03/10/forming-sheet-metal-parts-with-3d-printed-dies/)
A Stylish Coffee Table Featuring Conway’s Game Of Life
https://hackaday.com/2020/03/10/a-stylish-coffee-table-featuring-conways-game-of-life/
Coffee tables are a great place to put your hot beverages, but most don’t offer a lot beyond that. For most people this is perfectly acceptable, but hackers often desire a little more. [Andrei Erdei] is one such person, who built Conway’s Game of Life into this handsome piece of …read more (https://hackaday.com/2020/03/10/a-stylish-coffee-table-featuring-conways-game-of-life/)
https://hackaday.com/2020/03/10/a-stylish-coffee-table-featuring-conways-game-of-life/
Coffee tables are a great place to put your hot beverages, but most don’t offer a lot beyond that. For most people this is perfectly acceptable, but hackers often desire a little more. [Andrei Erdei] is one such person, who built Conway’s Game of Life into this handsome piece of …read more (https://hackaday.com/2020/03/10/a-stylish-coffee-table-featuring-conways-game-of-life/)
IoT Cassette Scroller Never Needs a Pencil
https://hackaday.com/2020/03/10/iot-cassette-scroller-never-needs-a-pencil/
The see-through electronics craze of the ’80s and ’90s clearly had an effect on [MisterM], and we can totally relate. Those candy-colored components inside undoubtedly launched a few thousand kids in the direction of electronics, as we can attest.
Though the odds seemed very much against him, [MisterM] was able …read more (https://hackaday.com/2020/03/10/iot-cassette-scroller-never-needs-a-pencil/)
https://hackaday.com/2020/03/10/iot-cassette-scroller-never-needs-a-pencil/
The see-through electronics craze of the ’80s and ’90s clearly had an effect on [MisterM], and we can totally relate. Those candy-colored components inside undoubtedly launched a few thousand kids in the direction of electronics, as we can attest.
Though the odds seemed very much against him, [MisterM] was able …read more (https://hackaday.com/2020/03/10/iot-cassette-scroller-never-needs-a-pencil/)