If coffee == true {
https://hackaday.com/2020/03/07/if-coffee-true/
Having a shared coffee maker in the workplace is both a blessing and a curse. It’s nice to have constant access to coffee, but it can be frustrating to find the coffee pot emptied right as you walk in to the break room. To solve this problem in their office, …read more (https://hackaday.com/2020/03/07/if-coffee-true/)
https://hackaday.com/2020/03/07/if-coffee-true/
Having a shared coffee maker in the workplace is both a blessing and a curse. It’s nice to have constant access to coffee, but it can be frustrating to find the coffee pot emptied right as you walk in to the break room. To solve this problem in their office, …read more (https://hackaday.com/2020/03/07/if-coffee-true/)
Z80 Computer Is Both Arduino And Shield
https://hackaday.com/2020/03/07/z80-computer-is-both-arduino-and-shield/
There have been plenty of Z80 computer builds here on Hackaday, but what sets them apart is what you do with them. [Andrew] writes in with his Z80 single-board computer made from scratch, using the Arduino standard headers for its I/O. In turn, since he needed an easy way to …read more (https://hackaday.com/2020/03/07/z80-computer-is-both-arduino-and-shield/)
https://hackaday.com/2020/03/07/z80-computer-is-both-arduino-and-shield/
There have been plenty of Z80 computer builds here on Hackaday, but what sets them apart is what you do with them. [Andrew] writes in with his Z80 single-board computer made from scratch, using the Arduino standard headers for its I/O. In turn, since he needed an easy way to …read more (https://hackaday.com/2020/03/07/z80-computer-is-both-arduino-and-shield/)
Smashed Laptop Becomes Stylish All-In-One
https://hackaday.com/2020/03/08/smashed-laptop-becomes-stylish-all-in-one/
Many of us will have broken a laptop at one point or another, destroying the screen or smashing the case. It can be frustrating, as there’s a perfectly usable computer in there, trapped inside a broken husk of a body. [Matthew] saw this not as a problem, but an opportunity …read more (https://hackaday.com/2020/03/08/smashed-laptop-becomes-stylish-all-in-one/)
https://hackaday.com/2020/03/08/smashed-laptop-becomes-stylish-all-in-one/
Many of us will have broken a laptop at one point or another, destroying the screen or smashing the case. It can be frustrating, as there’s a perfectly usable computer in there, trapped inside a broken husk of a body. [Matthew] saw this not as a problem, but an opportunity …read more (https://hackaday.com/2020/03/08/smashed-laptop-becomes-stylish-all-in-one/)
Velocity Based Training, With A Camera
https://hackaday.com/2020/03/08/velocity-based-training-with-a-camera/
In the world of weight training, the buzzword of the moment is VBT, or Velocity Based Training. This involves sensors being used to measure the speed and position of a weight as it moves through each repetition, and thus provide instant feedback for the athlete and glean information from which …read more (https://hackaday.com/2020/03/08/velocity-based-training-with-a-camera/)
https://hackaday.com/2020/03/08/velocity-based-training-with-a-camera/
In the world of weight training, the buzzword of the moment is VBT, or Velocity Based Training. This involves sensors being used to measure the speed and position of a weight as it moves through each repetition, and thus provide instant feedback for the athlete and glean information from which …read more (https://hackaday.com/2020/03/08/velocity-based-training-with-a-camera/)
Robot Fights Fire With IR
https://hackaday.com/2020/03/08/robot-fights-fire-with-ir/
Fighting fire with robots may take jobs away from humans, but it can also save lives. [Mell Bell Electronics] has built a (supervised) kid-friendly version of a firefighting robot that extinguishes flames by chasing them down and blowing them out.
This hyper-vigilant robot is always on the lookout for fire, …read more (https://hackaday.com/2020/03/08/robot-fights-fire-with-ir/)
https://hackaday.com/2020/03/08/robot-fights-fire-with-ir/
Fighting fire with robots may take jobs away from humans, but it can also save lives. [Mell Bell Electronics] has built a (supervised) kid-friendly version of a firefighting robot that extinguishes flames by chasing them down and blowing them out.
This hyper-vigilant robot is always on the lookout for fire, …read more (https://hackaday.com/2020/03/08/robot-fights-fire-with-ir/)
Bus Sniffing Leads to New Display for Vintage Casio
https://hackaday.com/2020/03/08/bus-sniffing-leads-to-new-display-for-vintage-casio/
Despite his best efforts to repair the LCD on his Casio FX-702P, it soon became clear to [Andrew Menadue] that it was a dead-end. Rather than toss this relatively valuable device in the trash, he wondered if would be possible to replace the LCD with a more modern display. Knowing …read more (https://hackaday.com/2020/03/08/bus-sniffing-leads-to-new-display-for-vintage-casio/)
https://hackaday.com/2020/03/08/bus-sniffing-leads-to-new-display-for-vintage-casio/
Despite his best efforts to repair the LCD on his Casio FX-702P, it soon became clear to [Andrew Menadue] that it was a dead-end. Rather than toss this relatively valuable device in the trash, he wondered if would be possible to replace the LCD with a more modern display. Knowing …read more (https://hackaday.com/2020/03/08/bus-sniffing-leads-to-new-display-for-vintage-casio/)
A Wireless Controller for the Mostly Printed CNC
https://hackaday.com/2020/03/08/a-wireless-controller-for-the-mostly-printed-cnc/
The Mostly Printed CNC (MPCNC) is an impressive project in its own right, allowing anyone with a 3D printer and some electrical conduit to build their own fairly heavy-duty CNC platform perfect for routing. Customization is the name of the game with the MPCNC, and few machines will look the …read more (https://hackaday.com/2020/03/08/a-wireless-controller-for-the-mostly-printed-cnc/)
https://hackaday.com/2020/03/08/a-wireless-controller-for-the-mostly-printed-cnc/
The Mostly Printed CNC (MPCNC) is an impressive project in its own right, allowing anyone with a 3D printer and some electrical conduit to build their own fairly heavy-duty CNC platform perfect for routing. Customization is the name of the game with the MPCNC, and few machines will look the …read more (https://hackaday.com/2020/03/08/a-wireless-controller-for-the-mostly-printed-cnc/)
Hackaday Links: March 8, 2020
https://hackaday.com/2020/03/08/hackaday-links-march-8-2020/
A lot of annoying little hacks are needed to keep our integer-based calendar in sync with a floating-point universe, and the big one, leap day, passed us by this week. Aside from the ignominy of adding a day to what’s already the worst month of the year, leap day has …read more (https://hackaday.com/2020/03/08/hackaday-links-march-8-2020/)
https://hackaday.com/2020/03/08/hackaday-links-march-8-2020/
A lot of annoying little hacks are needed to keep our integer-based calendar in sync with a floating-point universe, and the big one, leap day, passed us by this week. Aside from the ignominy of adding a day to what’s already the worst month of the year, leap day has …read more (https://hackaday.com/2020/03/08/hackaday-links-march-8-2020/)
Tiny Duck Hunt Looks Like Big Fun
https://hackaday.com/2020/03/08/tiny-duck-hunt-looks-like-big-fun/
Unless you’ve held on to an old tube TV, did the hack that lets you use a light gun with an LCD via Wiimote receiver and a couple of microcontrollers, or live close to one of those adult arcades, you might be really jonesing to play Duck Hunt by now. …read more (https://hackaday.com/2020/03/08/tiny-duck-hunt-looks-like-big-fun/)
https://hackaday.com/2020/03/08/tiny-duck-hunt-looks-like-big-fun/
Unless you’ve held on to an old tube TV, did the hack that lets you use a light gun with an LCD via Wiimote receiver and a couple of microcontrollers, or live close to one of those adult arcades, you might be really jonesing to play Duck Hunt by now. …read more (https://hackaday.com/2020/03/08/tiny-duck-hunt-looks-like-big-fun/)
Homebuilt Onewheel Uses Hoverboard Parts
https://hackaday.com/2020/03/08/homebuilt-onewheel-uses-hoverboard-parts/
Since Back To The Future II first screened back in 1989, people have been waiting for hoverboards to become reality. Instead, we got a dangerous two-wheeled contraption going by the same name. Wanting something a little cooler, [Bartek Plonek] decided to convert his to a one-wheel design. (Video, embedded below.) …read more (https://hackaday.com/2020/03/08/homebuilt-onewheel-uses-hoverboard-parts/)
https://hackaday.com/2020/03/08/homebuilt-onewheel-uses-hoverboard-parts/
Since Back To The Future II first screened back in 1989, people have been waiting for hoverboards to become reality. Instead, we got a dangerous two-wheeled contraption going by the same name. Wanting something a little cooler, [Bartek Plonek] decided to convert his to a one-wheel design. (Video, embedded below.) …read more (https://hackaday.com/2020/03/08/homebuilt-onewheel-uses-hoverboard-parts/)
Don’t Scrape Magnet Wire, Do This Instead
https://hackaday.com/2020/03/09/dont-scrape-magnet-wire-do-this-instead/
[Tom] doesn’t much like breadboarding. He prefers to wire up prototypes with perfboard and solder point-to-point with enameled magnet wire. That may sound troublesome to some of you, but [Tom] has come up with a few tips to make prototyping with perfboard and magnet wire easier and more effective, and …read more (https://hackaday.com/2020/03/09/dont-scrape-magnet-wire-do-this-instead/)
https://hackaday.com/2020/03/09/dont-scrape-magnet-wire-do-this-instead/
[Tom] doesn’t much like breadboarding. He prefers to wire up prototypes with perfboard and solder point-to-point with enameled magnet wire. That may sound troublesome to some of you, but [Tom] has come up with a few tips to make prototyping with perfboard and magnet wire easier and more effective, and …read more (https://hackaday.com/2020/03/09/dont-scrape-magnet-wire-do-this-instead/)
See the Damage 250-Pound Combat Robots Get
https://hackaday.com/2020/03/09/see-the-damage-250-pound-combat-robots-get/
Combat robots have been a thing for a while, but we don’t normally get a close look at the end results of the sort of damage they can both take and deal out. [Raymond Ma] spent time helping out with season four of BattleBots and wrote about the experience, as …read more (https://hackaday.com/2020/03/09/see-the-damage-250-pound-combat-robots-get/)
https://hackaday.com/2020/03/09/see-the-damage-250-pound-combat-robots-get/
Combat robots have been a thing for a while, but we don’t normally get a close look at the end results of the sort of damage they can both take and deal out. [Raymond Ma] spent time helping out with season four of BattleBots and wrote about the experience, as …read more (https://hackaday.com/2020/03/09/see-the-damage-250-pound-combat-robots-get/)
The Legacy of One of Science’s Brightest Stars: Freeman Dyson
https://hackaday.com/2020/03/09/the-legacy-of-one-of-sciences-brightest-stars-freeman-dyson/
Of the many well-known names in science, few have been as reluctant to stick to one particular field as Freeman John Dyson. Born in the UK in 1923, he showed a great interest in mathematics and related fields even as a child. By the time he was 15 he had …read more (https://hackaday.com/2020/03/09/the-legacy-of-one-of-sciences-brightest-stars-freeman-dyson/)
https://hackaday.com/2020/03/09/the-legacy-of-one-of-sciences-brightest-stars-freeman-dyson/
Of the many well-known names in science, few have been as reluctant to stick to one particular field as Freeman John Dyson. Born in the UK in 1923, he showed a great interest in mathematics and related fields even as a child. By the time he was 15 he had …read more (https://hackaday.com/2020/03/09/the-legacy-of-one-of-sciences-brightest-stars-freeman-dyson/)
John Deere And Nebraska’s Right To Repair, The Aftermath Of A Failed Piece Of Legislation
https://hackaday.com/2020/03/09/john-deere-and-nebraskas-right-to-repair-the-aftermath-of-a-failed-piece-of-legislation/
For the past few years now we’ve covered a long-running battle between American farmers and the manufacturers of their farm machinery, over their right to repair, with particular focus on the agricultural giant John Deere. The manufacturer of the familiar green and yellow machinery that lies in the heart and …read more (https://hackaday.com/2020/03/09/john-deere-and-nebraskas-right-to-repair-the-aftermath-of-a-failed-piece-of-legislation/)
https://hackaday.com/2020/03/09/john-deere-and-nebraskas-right-to-repair-the-aftermath-of-a-failed-piece-of-legislation/
For the past few years now we’ve covered a long-running battle between American farmers and the manufacturers of their farm machinery, over their right to repair, with particular focus on the agricultural giant John Deere. The manufacturer of the familiar green and yellow machinery that lies in the heart and …read more (https://hackaday.com/2020/03/09/john-deere-and-nebraskas-right-to-repair-the-aftermath-of-a-failed-piece-of-legislation/)
PCB Finishes Hack Chat
https://hackaday.com/2020/03/09/pcb-finishes-hack-chat/
Join us on Wednesday, March 11 at noon Pacific for the PCB Finishes Hack Chat with Mark Hughes and Elijah Gracia!
There’s no way to overestimate the degree to which the invention of the printed circuit board revolutionized electronics. What was once the work of craftspeople weaving circuits together with …read more (https://hackaday.com/2020/03/09/pcb-finishes-hack-chat/)
https://hackaday.com/2020/03/09/pcb-finishes-hack-chat/
Join us on Wednesday, March 11 at noon Pacific for the PCB Finishes Hack Chat with Mark Hughes and Elijah Gracia!
There’s no way to overestimate the degree to which the invention of the printed circuit board revolutionized electronics. What was once the work of craftspeople weaving circuits together with …read more (https://hackaday.com/2020/03/09/pcb-finishes-hack-chat/)
Dexter Robot Arm Embraces New Manufacturing with First Micro-Factory
https://hackaday.com/2020/03/09/dexter-robot-arm-embraces-new-manufacturing-with-first-micro-factory/
Haddington Dynamics, the company behind the Dexter robot arm that won the 2018 Hackaday Prize, has opened its first microfactory to build robot arms for Australia and Southeast Asia.
You may remember that the combination of Dexter’s makeup and capabilities are what let it stand out among robotics projects. The …read more (https://hackaday.com/2020/03/09/dexter-robot-arm-embraces-new-manufacturing-with-first-micro-factory/)
https://hackaday.com/2020/03/09/dexter-robot-arm-embraces-new-manufacturing-with-first-micro-factory/
Haddington Dynamics, the company behind the Dexter robot arm that won the 2018 Hackaday Prize, has opened its first microfactory to build robot arms for Australia and Southeast Asia.
You may remember that the combination of Dexter’s makeup and capabilities are what let it stand out among robotics projects. The …read more (https://hackaday.com/2020/03/09/dexter-robot-arm-embraces-new-manufacturing-with-first-micro-factory/)
Fear of Potato Chips: Samy Kamkar’s Side-Channel Attack Roundup
https://hackaday.com/2020/03/09/fear-of-potato-chips-samy-kamkars-side-channel-attack-roundup/
What do potato chips and lost car keys have in common? On the surface, it would seem not much, unless you somehow managed to lose your keys in a bag of chips, which would be embarrassing enough that you’d likely never speak of it. But there is a surprising link …read more (https://hackaday.com/2020/03/09/fear-of-potato-chips-samy-kamkars-side-channel-attack-roundup/)
https://hackaday.com/2020/03/09/fear-of-potato-chips-samy-kamkars-side-channel-attack-roundup/
What do potato chips and lost car keys have in common? On the surface, it would seem not much, unless you somehow managed to lose your keys in a bag of chips, which would be embarrassing enough that you’d likely never speak of it. But there is a surprising link …read more (https://hackaday.com/2020/03/09/fear-of-potato-chips-samy-kamkars-side-channel-attack-roundup/)
Wood-Turning A Bladeless Fan
https://hackaday.com/2020/03/09/wood-turning-a-bladeless-fan/
It’s a simple enough premise: to make a Dyson-style bladeless fan out of wood. The execution of the finished fan, done and filmed by [Neil] from Pask Makes on YouTube, is however spectacular. Using nothing but scrap wood from a chopping board business local to him, he’s made the entire …read more (https://hackaday.com/2020/03/09/wood-turning-a-bladeless-fan/)
https://hackaday.com/2020/03/09/wood-turning-a-bladeless-fan/
It’s a simple enough premise: to make a Dyson-style bladeless fan out of wood. The execution of the finished fan, done and filmed by [Neil] from Pask Makes on YouTube, is however spectacular. Using nothing but scrap wood from a chopping board business local to him, he’s made the entire …read more (https://hackaday.com/2020/03/09/wood-turning-a-bladeless-fan/)
3D Printed Tooling Punches Above Its Weight With Added Hardware
https://hackaday.com/2020/03/09/3d-printed-tooling-punches-above-its-weight-with-added-hardware/
Reddit user [thetelltalehart] has been making brake press tooling with 3D printed PLA, and recently shared an interesting picture of a hybrid brake press punch, shown here on the right, in blue.
In a press, material such as sheet metal is formed into a shape by forcing the material around …read more (https://hackaday.com/2020/03/09/3d-printed-tooling-punches-above-its-weight-with-added-hardware/)
https://hackaday.com/2020/03/09/3d-printed-tooling-punches-above-its-weight-with-added-hardware/
Reddit user [thetelltalehart] has been making brake press tooling with 3D printed PLA, and recently shared an interesting picture of a hybrid brake press punch, shown here on the right, in blue.
In a press, material such as sheet metal is formed into a shape by forcing the material around …read more (https://hackaday.com/2020/03/09/3d-printed-tooling-punches-above-its-weight-with-added-hardware/)
A Reminder Not To Touch Your Face
https://hackaday.com/2020/03/09/a-reminder-not-to-touch-your-face/
In 2020, the world is focused on the rampant spread of a new virus by the name of COVID-19. Like many infectious diseases, transmission can be reduced by good hygiene practices. To help in the fight, [Nick Bild] threw together a device he calls Sentinel.
The concept is simple. Reduce …read more (https://hackaday.com/2020/03/09/a-reminder-not-to-touch-your-face/)
https://hackaday.com/2020/03/09/a-reminder-not-to-touch-your-face/
In 2020, the world is focused on the rampant spread of a new virus by the name of COVID-19. Like many infectious diseases, transmission can be reduced by good hygiene practices. To help in the fight, [Nick Bild] threw together a device he calls Sentinel.
The concept is simple. Reduce …read more (https://hackaday.com/2020/03/09/a-reminder-not-to-touch-your-face/)