1) click Tags tab then Albums tab

2) click line showing Artist and Album. If it says unknown fill in the appropriate text. Genre is optional but if you want to put one choose Audiobook.

3) Covers: add a Cover if you wish either a jpg or a png. It'll show Other unless you click on it then it'll show Cover (front).

4) click Encode to start encoding. The output file should show Author - Title.opus like Warner Von Lorne - Wanted 7 Fearless Engineers.opus

5) click Joblist tab to show the progress and time reaming for the audiobook encode

Update opus audiobook metadata without having to re-encode audiobook

I don't recommend using VLC to modify metadata for opus files as it may destroy cover metadata. Won't delete this post though.

1) VLC choose View | Playlist or Ctrl-L then double click on album cover to edit metadata. Can change Artist = author or Album = Title.

2) Can't change Album cover even by right clicking on it and changing some metadata and clicking Save Metadata. For that you need to use TagEditor (free GPL for Windows or Linux).

TagEditor https://github.com/Martchus/tageditor (free GPL Windows and Linux appimage) for those on Mac use MP3Tag

1) Can use to change the opus audiobook cover since VLC doesn't work actually work for changing covers.

2) Change Author = Artist or Title = Album of audiobook

3) Just pointing out under Tag Management it'll show you Vorbis Comment (in Opus stream)

4) Save your metadata changes

VLC videolan.org/vlc (free, GPL) on Linux, Mac, Windows play opus chaptered audibooks.

If you wish to increase or decrease the playback speed (0.25x to 4.00x) be sure to check under Preferences | Audio that Enable Time-Stretching audio is checked as they adjusts the pitch to improve output at faster or slower speeds. VLC on Linux doesn't show chapter durations or starting times unfortunately.

VLC Settings on iOS make sure Continue audio playback is set to Always so it’ll resume from the point you last listened to. For variable playback speed make sure Time-stretching audio is checked.

When importing opus audiobooks into VLC probably the best way is to transfer the opus audiobook(s) to Files on iOS then move them to the VLC directory.

Audacity (free, GPL Win, Linux, Mac) to Normalize the audio if the m4b audiobook volume is too low. This is very rare that you'll encounter such a case.

First export from freac. In General Settings under Output filenames put

Filename pattern: <title>

Each chapter will be encoded and output to matching the chapter name.
Uncheck Encode to a single file
Encoder choose opus 32kbps or as high as the original bitrate as these files need to be re-encode three times in total.

1) in Audacity import all chapter files at once. Select All (Ctrl-A) then Effect | Normalize.

2) For that rare chapter if the wavelength doesn't go up like the rest double click on the track to highlight both tracks then Effect | Amplify and choose an Amplification (db) of whatever kind of matches the height of the other track waveforms.

3) File | Export | Export Multiple and choose mp3 or ogg. Don't lower the bitrate lower than the original.

Using Audacity seems a tad quicker to use for normalization than Ocenaudio next post.

Ocenaudio (free GPL Win, Linux, Mac) can also Normalize audio.

1) Import all chaptered audio files by dragging them into Ocenaudio and it takes awhile to analyzing them (about 3x longer than audacity). Each chapter double click on and choose Effects | Normalize or press the Normalize button.

2) Each subsequent chapter just press Ctrl-Y to repeat the Normalization after double clicking on the track to select it.

3) File | Save All and it'll output the opus files to a variable bitrate around 50kbps overwriting the original ones.

4) For that rare chapter if it doesn't normalize the track like the other tracks judging by the waveform graph then use the Gain Tool and increase the dB appropriately.

For advanced users: you can use MKVToolnix to extract the chapters without re-encoding them although you'll have to manually rename the chapter names. https://t.iss.one/geektips/79

Automatically create audiobook chapters from a single mp3 audiobook that has no chapters.

1) Import single mp3 audiobook into Audacity 3.x or higher

2) Ctrl-A to select all then Analyze | Label Sounds (this process took me 5 minutes on my laptop) Automatically detect chapter breaks for silence of at least 3 seconds as seen in the screenshot. You could try 2.5 seconds or even 2 seconds but don't go below that.

3) In Audacity choose File | Export | Export Multiple and Format: Opus Bitrate: 128kbps (same as original mp3)

4) VBR Mode: Off (Variable Bitrate mode)

5) Split files based on: Labels by default they are Chapter 001, Chapter 002, Chapter 003, etc. if you set it like the screenshot in the previous post.

6) Name files: Using Label/Track Name and click Export and it'll re-encode the one mp3 file into multiple opus audio files, one for each chapter detected.

7) Rename them to chapter names as the book and before importing them into freac to make an opus chaptered audiobook, drag into MusicBrainz Picard and Tag from file names.

Many times the auto detection doesn't work so you can manually find chapters. Once you locate the starting point of the next chapter click it then choose Select | Clip Boundaries | Previous Clip Boundary to Cursor. Then Edit | Labels | Add Label at Selection (Ctrl+B) then name your chapter. This is a tedious process and lots of work but might be worth it if the audiobook is a great one.

To manual locate chapters you zoom in and look for big breaks in the waveform graph.

An even quicker way if you have just a few chapters is to use LosslessCut (Linux, Mac, Win) free GPL. It doesn't have to analyze the mp3 or opus file. Create in and out points and separate the files to export.

Chapters created automatically and here is the result in VLC on Linux.

Most used PDF operations performed with with various free apps

Highlight text in yellow with Document Viewer (Evince)
select text | right click or Ctrl-H
able to change color by right-clicking | Annotation Properties

flatpak install flathub org.gnome.Evince
flatpak run org.gnome.Evince

In Evince to print many pages in one page
choose Print | Print to File
Page Setup | Pages per side: 1, 2, 4, 6, 9 or 16
------------------------------------------------

PDF pages per side (more options) and to make booklets out of a linear PDF
https://kjo.herbesfolles.org/bookletimposer/

sudo apt install bookletimposer

------------------------------------------------

Combine many images from a directory into a PDF.

sudo apt install img2pdf

(or python)

pip3 install img2pdf

img2pdf *.jpg -o output.pdf

If you have images and a few are much bigger than the others you might get extremely small pages in your document. Use Pix or Image View (Xviewer) to quickly browse through the images and check out the image dimensions. So if most are say 2000 x 1500 or so and just a few are 3000 x 2500 or higher set the max pixel height and width and all PDF pages will be relatively uniform in size and with no white margins.

img2pdf --imgsize 2000x2000 *.jpg -o output.pdf

------------------------------------------------

OCR (Optical Character Recognition) a PDF document while retaining the image and putting the OCR'ed text hidden behind it

1) install tesseract 5.x which is 15% faster than 4.x

sudo add-apt-repository ppa:alex-p/tesseract-ocr-devel
sudo apt update
sudo apt install tesseract-ocr

2) install ocrmypdf

pip install ocrmypdf

3) install JBIG2 for image compression
https://ocrmypdf.readthedocs.io/en/latest/jbig2.html

OCR a PDF

ocrmypdf input.pdf output.pdf

OCR a PDF and add metadata

ocrmypdf --title "title" --author "author" input.pdf output.pdf

OCR a PDF and optimize file size by compressing images

ocrmypdf -O 3 input.pdf output.pdf

Only optimizing a PDF and skipping OCR

ocrmypdf -s -O 3 --skip-big .1 input.pdf output.pdf

-s is same as —skip-text (skips text if already OCR'd)
-O (that's a letter O not a 0 zero) --optimize and 3 does aggressive lossy optimizations (including lossy JBIG2)
- - skip-big tells it to skip any page over 0.1 Megapixels (which would be every page)
- - output-type pdf to disable PDF/A generation and maintain annotations

Batch ocrmypdf limiting it to 2 pdfs at a time

sudo apt install parallel
mkdir output 

(in dir of PDFs)

parallel --tag -j 2 ocrmypdf -s -O 3 --skip-big .1 '{}' 'output/{}' ::: *.pdf

------------------------------------------------

To extract, delete, rotate, split, combine PDF pages use PDF Slicer (Windows, Linux, keyboard to rearrange) or PDF Arranger drag PDF pages to rearrange

flatpak install flathub com.github.junrrein.PDFSlicer
flatpak run com.github.junrrein.PDFSlicer

flatpak install flathub com.github.jeromerobert.pdfarranger
flatpak run com.github.jeromerobert.pdfarranger

------------------------------------------------

Combine PDFs

pdftk one.pdf two.pdf three.pdf output combined.pdf
pdftk *.pdf cat output combined.pdf

-v = natural sort of (version) numbers within text

ls -v *.pdf > namelist
pdftk 'cat namelist' output combined.pdf

------------------------------------------------

Clean PDF metadata
https://exifcleaner.com AppImage, DEB, rpm, Windows, Mac
drag your PDFs into ExifCleaner window and their metadata is wiped
------------------------------------------------

Crop a PDF (not just crop and hide margins) (Linux, Mac, Windows)
Master PDF Editor (DEB, rpm)$70 but can use the non-expiring free version
https://code-industry.net/free-pdf-editor/

Crop a PDF in Master PDF Editor (free version)
Crop a page or pages manually by selecting the area to keep. Click Document | Crop Pages

------------------------------------------------

Edit text in a PDF with LibreOffice Draw. Has problems with some complicated documents though.
------------------------------------------------

NormCap is a app that lets you capture and OCR any part of your screen you select that is an image and extract text copied to your clipboard which can then be pasted into a text editor.

In Applications | Settings | Keyboard under Application Shorcuts add Ctrl+Print and for the command navigate to the NormCap-unstable-x86_64.AppImage
------------------------------------------------

View a PDF in Dark Mode / Night Mode Grayscale NOT inverted images like most PDF viewers

Master PDF Editor (free version)
Settings | Display and check Replace Document Colors
change Page Background: black color #2c2c2c and Text: white or light gray
To change to Dark Mode grayscale click View | Replace Document Colors

Also Zathura has Dark Mode grayscale
sudo apt install zathura
Add comic book support cbz cbr files dark mode grayscale on the images too
sudo apt install zathura-cb

Zathura has no thumbnails nor shows document properties

nano ~/.config/zathura/zathurarc
Paste the following into the zathurarc text configuration file and save it. You don't need to create this configuration file as it already has dark mode CTRL-R. So only do this if you don't want pure black and pure white colors.

set recolor true
set recolor-darkcolor "#dcdccc"
set recolor-lightcolor "#1f1f1f"

Zathura Keyboard shortcut keys since there isn't any menu

/ search for text
n next search result
shift+n previous search result

d toggles dual page display
o open another PDF
r rotate page
s fit to screen
- zoom out
+ zoom in
Tab toggle index
CTRL-P print
CTRL-R toggle recolor (dark mode)
F5 Presentation mode
F11 fullscreen

Optimized PDF from 3.1MB to 176KB

ocrmypdf -s -O 3 --skip-big .1 Harvey\ Weinstein\ accuser\ Mogul\ lacks\ male\ genitalia.pdf Harvey\ Weinstein\ accuser\ Mogul\ lacks\ male\ genitalia_opt.pdf 

metadata cleaned with ExifCleaner. Screenshot shows metadata before being wiped

34 Sparkel Drink Ideas all non-alcoholic and no tea ones. Just put this together for personal reference.

Working with PDFs. Made a PDF of the above two posts for quick reference. Pretty much sums up all the stuff I do on a regular basis with PDFs.

My profiles for videomass I use.

Profile name: hevc 265 libopus 16k crf 28
Description: crf 28 or 31 for VHS quality
output format: mp4


-c:v hevc -crf 28 -c:a libopus -b:a 16k -vf scale="-2:720"

Profile name: burn-in subtitles
Description: x265, rescale to 720p, srt subs hard-coded
output format: mp4
-c:v hevc -crf 28 -c:a libopus -b:a 16k -vf scale="-2:720",subtitles="/home/mint/Videos/English.srt"

Profile name: replace audio and rescale to 720p
Description: x265 replace audio track
output format: mp4


-i "/home/mint/Music/music.opus" -c:v hevc -crf 28 -vf scale="-2:720" -c:a copy -map 0:v:0 -map 1:a:0 -map_metadata 0 -shortest

Profile name: Extract audio from video converts to Opus
Description: in Opus 16kbps (talk) 96k (music)
output format: opus


-vn -sn -map 0:1 -c:a:0 libopus -b:a 16k -vbr off -map_metadata 0

Profile name: encode video to audio only opus
Description: 16kbps for speech, talk audio only from video
output format: opus


-vn -c:a libopus -b:a 16k

-vbr off

Profile name: Add audio stream to video (copy)
Description: muxing audio with video
output format: mp4
-i "/home/mint/music.opus" -c:v copy -c:a copy -map_metadata 0 -shortest

Profile name: audio filter Dynamic Audio Normalization
Description: collection of mp3s prepare for opus chaptered audiobook
output format: opus


-vn -c:a libopus -b:a 32k -vbr off -ar 48000 -af dynaudnorm,aformat=channel_layouts=stereo

Profile name: noise reduction
Description: highpass=500 lowpass =1000
output format: opus


-c:a libopus -vbr off -b:a 32k -ar 48000 -af highpass=200,lowpass=3000,afftdn,aformat=channel_layouts=stereo,volume=12dB,dynaudnorm

Profile name: remove silence
Description: start_periods=0 to only remove silence from beginning
output format: opus


-c:a libopus -vbr off -b:a 32k -ar 48000 -af highpass=500,lowpass=1000,afftdn,aformat=channel_layouts=stereo,volume=12dB,"silenceremove=start_periods=1:stop_periods=-1:start_threshold=-50dB:stop_threshold=-50dB:start_silence=1:start_duration=2:stop_duration=5:detection=peak",dynaudnorm

ffmpeg 5.x no longer requires the option -strict -2 when using opus in mp4. If still on ffmpeg 4.x you need to use it.

Download all the presets here https://t.iss.one/geektips/321

downsub.com works great for getting subtitles

Telegram doesn't have subtitles and most users aren't gonna download a video and the SRT subs and watch locally. So until telegram does we must burn-in subtitles. See previous post how to do so with videomass.

1) paste the link to the video

2) click on SRT to download the English subtitles

3) optionally translate from one language to another (I've done this with German to English)

4) download the language you want it translated to

Make a chaptered audiobook with the chapter times already specified.

On youtube it lists the times but has a single segment for chapters 1-10 and so on.

0:00:00 Opening
0:00:49 Chapter 1: The Beginning
0:09:07 Chapter 2: Regality
0:29:27 Chapter 3: Polar Symbolism; The Lord of Peace and Justice
0:40:28 Chapter 4: The Law, The State, the Empire
0:58:40 Chapter 5: The Mystery of the Rite
1:11:39 Chapter 6: On the Primordial Nature of the Patriciate
1:28:07 Chapter 7: Spiritual Virility
1:38:52 Chapter 8: The Two Paths in the Afterlife
1:53:47 Chapter 9: Life and Death of Civilizations
2:08:05 Chapter 10: Initiation and Consecration

First in videomass download all the segments for the audiobook using yt-dlp.

in LosslessCut (Win, Mac, Linux appimage and GPL free) load up the mp4 for chapters 1 to 10 and press G (to go to specific time) and input the time to create chapter breaks. Press B to set a break / split point there.

LosslessCut export options

1) choose separate files which you'll rename later in your file manager to match the chapter names

2) Smart cut (experimental) Yes as this will cut exactly at the break/split point.

Now just set metadata to file name in MusicBrainz Picard and import into freac and make your chaptered opus audiobook.