Low-cost 2.13-inch tri-color E-Ink display compatible with Wemos D1 mini, D1 mini Pro, and D32 Pro WiFI boards based on ESP8266 or ESP32 WiSoC

Review of Intel NUC 11 Enthusiast Phantom Canyon NUC11PHKi7C in Linux, more precisely Ubuntu 20.04 with benchmarks, gaming, etc...

Neuralaxy's NeuroStimDuino is an open-source Arduino shield that allows students, researchers, and hobbyists to study the effects of neurostimulation on

MINISFORUM HM50 is a 15W AMD Ryzen 5 4500U hexa-core mini PC with up to 64GB RAM, 512GB SSD, triple 4K display support, 2.5GbE, and more.

A list with the top five most powerful Arm single board computers (SBC's) or development kits in 2021 for mobile, robotics, networking, etc...

Techbase iModGATE-AI is a Raspberry Pi CM4 based gateway AI designed for failure monitoring and predictive maintenance of IoT installations.

BMC Labs has launched open-source board::mini development tools that include a board and expansion boards that will aid your application.

Minima is a tiny Arduino Zero compatible module with Microchip SAMD21 Cortex-M0+ MCU exposing 18x IOs and USB via 2.54mm pitch pads & holes.

Raspberry Pi Pico Arduino Core is a library that allows you to use Raspberry Pi Pico or other RP2040 boards with the Arduino IDE.

MECOOL KM2 is an Amlogic S905X2-B TV box running Android TV on Android 10, and certified for Netflix 4K media streaming. Price is around $60.

Teknic ClearLink EtherNet/IP Motion and I/O Controller supports 4 axes of motion control via an EtherNet/IP compatible PLC.

Based on Qualcomm IPQ8072, Xiaomi Mi AX9000 WiFi 6 Enhanced Edition router comes with 12 antennas, and supports up to 1000 clients.

Google has now released the source code for Lyra low bitrate speech codec, written in C++ for optimal speed, efficiency, and interoperability.

We've recently seen it's possible to use a long cable with the Raspberry Pi camera thanks to THine camera extension kit that works with 20-meter LAN

ArduSimple simpleRTK2B-SBC achieve centimeter-level positioning in multiple directions thanks to up to three u‑blox ZED-F9P RTK GNSS receivers

ArduinoShrink library provides the same functions as Arduino AVR Core but deliver smaller, faster, and more efficient firmware files.

AAEON BOXER--8230AI & BOXER-8233AI embedded computers are based on Jetson TX2 NX SO-DIMM module, targets Edge AI and robotics applications.

Eyecam is an open-source webcam shaped like a human eye and acts like one thanks to a Raspberry Pi Zero + camera and an Arduino board.

DIY four-bay NAS based on Raspberry Pi Compute Module 4, a carrier board fitted with 4x SATA PCIe card, and a 3D printed enclosure.

Eurotech BoltGPU 10-31 is a rugged fanless embedded system powered by NVIDIA Jetson Xavier NX module, equipped with four FAKRA connectors for GMSL camera,