Raising the grade inside the footprint of the greenhouse. Final grade will be 2in below the bottom holes in posts. Yesterday we relocated the water and electrical lines from the left right center to the front corner. Later ill switch that spigot to a hydrant.

Can I just use a stainless steel bolt hanging on the bottom of a fishing float with a tiny hole drilled through the cap and a tennis ball hanging on the outside so when it's at the top my tank is empty and when it's down by the bottom my tank is full? I've done this before with 50 lb test line and never had to replace them.

How to Build a Ram Pump DIY Tutorial

The Ram Pump Design Manual Calcs Pressure Elevation Measurements Sizing Operation.

I had an epiphany today. We are grading around the greenhouse and I gotta remove dirt. So the question is how to know how many inches of dirt I have left to remove with my laser level and the "beep beep ding ding" receiver? It only reads UP or DOWN within 1inch of level.

So it occured to me that I have a telscoping grade rod. If I turn it upside down and clip the receiver to the fattest portion of it, I can push it down telescoping the smaller portion into the larger part. Read the scale on it to know the difference.

Example: extend the smallest section of the grade rod fully and facing down. Attach the beeper to the fatter portion. To measure go where you need to measure the earth, push down on the rod and make it compress. When the beep goes solid, read the number of inches it compressed.

Ram pump in switzerland

Gold hit $4000 yesterday. Put another way, the dollar hit 1/4000th. Fiat notes always return to their original value... 0.