Pull your kids from the public schools. Here in SC, we've had no child left behind which says "all students must perform at grade level" since 2001. 25 years. 2 entire generations of students... 25 graduating classes... and.... the State Dept of Ed released this statement: How this year’s results compare In the previous academic year, about 60 percent of students met or exceeded expectations in English language arts, up from nearly 54 percent the year before. Math scores also improved but remained lower than English language arts. About 44 percent of students met or exceeded expectations in math in the prior academic year. State education leaders say the overall goal of the assessment is to have at least 75 percent of students performing at or above grade level by 2030.

We slowed the classes to that of the slowest kid, we allowed the smartest kids to wither on the vine. We put bored fidgety boys on ADD head meds and have an entire genertion of young men on meth living on the streets.... and hte dept of Ed says "four more years" and we'll be 75% of the way there.

Daughter says pushing a push mower is too hard. So I got her something lighter. I’m sure she will love it.

Pull your children from the public schools.

Regarding the post above... back in the 80's one of the neighbors was a stay home dad since wife made more than him. So he looked after their daughter until she was school age. He did a lot of wood working. So daughter is in school and teacher wants a conference. Says the girl knows all her shapes except square. She keeps drawing an L.

Many times teachers aren't as smart as they think they are. They express their ignorance with confidence.

A quick lesson for you about batteries and BMS (battery management system). LFP or LiFePO4 48v batteries are made of 16 individual cells arranged in series. Although we say its a 48v battery, it actually reads 55.2v when full and 46v when empty. Kinda like how 2x4's aren't really 2x4 inches.

1)The BMS keeps tabs on the 16 individual cells. If one is too high or too low voltage, the BMS will shut down that battery so that one cell isn't damaged.
2)The BMS will level the charge between these cells. Let's say your battery is at 55.2v, a perfect 3.45v per cell right? Maybe not... maybe 15 cells are at 3.44v and one cell is at 3.6v. The BMS will take voltage from that one high cell and distribute it to the others. This is called top balancing.
3)The BMS will use it's canbus interface to communicate the SoC (State of Charge) to the inverter. It will also advise the inverter not to charge the battery if it's too cold or the battery is full.

Point 3 is what I want to expand on. If you have more than one battery and BMS, you could connect them all to the inverter on canbus. The problem is the inverter would hear each BMS squawking it's SOC and the inverter wouldn't know who to listen to. The display on the inverter would change rapidly as each battery told the inverter a different SoC. Can you imagine 4 people in a room shouting 100% 95% 98% 99%? How confusing it would be.

The solution to this is that you nominate one battery to be the spokesperson. Only that battery speaks to the inverter. Behind the scenes the batteries talk among each other using RS485. The spokesperson collects data from each of your batteries, consolidates it into one number and tells the inverter.

So now you know why server rack batteries have RS485 and CANBUS ports!

The JK BMS is smart enough to take into account that you might have mix-matched different capacity batteries. When these batteries communicate over RS485 they tell the master bms what their stated capacity is and how many amphours they have left. So you can absolutely mix 5kwh, 16kwh and 32kwh batteries together and it'll work just fine.

Another "back to basics" lesson today... If you have a group of batteries and decide to add an additional battery, how exactly do you do that? Even a small voltage difference can result in extremely high amps between batteries.

For example, you have a new battery sitting at 53.0v and the other 6 batteries are at 53.8v.... if you connect them together there will be several hundred amps between batteries for a few minutes. It will likely trip a circuit breaker or blow a fuse.

So you have a few options:
1)set the battery with the lower voltage to not allow charging. You can do this from a bluetooth app in JK BMS and many other brands. Connect the battery and nothing happens. After sundown your other 6 batteries will get drawn down. As their voltage drops below the voltage of the new battery, it will begin to discharge with the rest. First thing in the morning, check to make sure that all batteries are at the same voltage and use your bluetooth app to re-enable charging. Now all of them will charge at once.

2)The other method is if you have the server rack version of JKBMS with a big wire toroid coil in the top right corner, you can simply connect the batteries together if the new one is a lower voltage than the rest. What will happen is that a lot of amps will flow into the new battery for about 3 seconds. The BMS will disable charging and go into low amp charging mode (limp mode). It will charge at 10 amps until it's voltage matches the other batteries in your "herd". At that time it will automagically revert to normal operation.

JK BMS with charge current limiter. upper right corner

Don't have a source on this one, but some good ideas here. 🏕

imagine drunkdriving the sneedclanker on city property 🤩