The CircuitPython community reached a big milestone together! There are 400 CircuitPython Libraries! The CircuitPython Library Bundle and Community Library Bundle contain all the current libraries …

To allow 2x Bluetooth modules to communicate with each other, we need to set the module to master and slave modes. In this tutorial I will show how to do the setup using CircuitPython. 😄

Tutorial:
https://tutorial.cytron.io/2022/05/31/bluetooth-hc-05-master…

I plan to add a light source to my video or live and this light can change colors. Part 2, I focused on the wiring part, IoT platform (Adafruit IO) and CircuitPython coding. 😄

Tutorial:
https://tutorial.cytron.io/2022/04/26/wifi-neopixel-rgb-led-using-circuitpython/…

This tutorial I would like to share how to interface the color sensor TCS3200 using CircuitPython on Raspberry Pi Pico. 😄

Tutorial:
https://tutorial.cytron.io/2022/04/20/color-rgb-detector-using-circuitpython-on-raspberry-pi-pico/

👨🏻‍💻👩🏻‍💻
Join our Telegram…

In this video I would like to share about a bidirectional visitor counter project that is programmed using CircuitPython on Maker Nano RP2040. 😄

Tutorial:
https://tutorial.cytron.io/2022/04/12/bidirectional-visitor-counter-using-circuitpython-on-maker-nano…

After assemble the Otto robot, next we will try to program it using CircuitPython. Basically we need to know how to control 4 servo motors to create the robot movement. 😄

Tutorial:
https://tutorial.cytron.io/2022/03/29/program-otto-diy-robot-for-basic-movements…

I would like to try building the Otto DIY robot using Maker Nano RP2040 and program it using CircuitPython. But the STL file provided cannot fit the board. So how? 😅

Tutorial:
https://tutorial.cytron.io/2022/03/22/otto-diy-robot-head-for-maker-nano-rp2040/…

In this tutorial I will share how to build a "talking photo" project using Maker Pi Pico and CircuitPython. 🤔😄

Tutorial:
https://tutorial.cytron.io/2022/03/08/talking-photo-program-using-circuitpython-on-maker-pi-pico/

👨🏻‍💻👩🏻‍💻
Join our Telegram
Trust Me…

Before this I have built a Hungry Robot using REKA:BIT. This time I want to try Maker Pi RP2040 and program it using CircuitPython.

Tutorial:
https://tutorial.cytron.io/2022/02/22/hungry-robot-powered-by-maker-pi-rp2040-and-circuitpython/

👨🏻‍💻👩🏻‍💻
Join…

Join Telegram Trust Me I'm A Maker 👨🏻‍💻👩🏻‍💻 https://t.iss.one/trustmeimamaker

In this tutorial I will share how to control a DC motor using Maker Drive and program it using CircuitPython on the Maker Nano RP2040.

Tutorial:
https://tutorial.cytron.io/2022/02/15/control…

Join Telegram Trust Me I'm A Maker 👨🏻‍💻👩🏻‍💻 https://t.iss.one/trustmeimamaker

This tutorial I use the same hardware setup as the internet clock tutorial. Just, this time I want to display a Telegram message on the dot matrix. 😄

Tutorial:
https://tutorial.cy…

Join Telegram Trust Me I'm A Maker 👨🏻‍💻👩🏻‍💻 https://t.iss.one/trustmeimamaker

In this tutorial, I will share how to display an image on the graphic LCD using Maker Nano RP2040 and I program it using CircuitPython. 😄

Tutorial:
https://tutorial.cytron.io/2021/12/21/display…