In this tutorial, we will see how we can monitor the readings of the power meter using Node-RED.

⦿ Learn more about IRIV PiControl: https://my.cytron.io/p-iriv-picontrol-cm4-industrial-controller

📄 Tutorial: https://my.cytron.io/tutorial/iriv-node-red-modbus…

Hi and welcome back again to another tutorial on using IRIV PiControl with Node-RED. In this tutorial, we will learn how to work with the OLED display.

⦿ Learn more about IRIV PiControl: https://my.cytron.io/p-iriv-picontrol-cm4-industrial-controller

📄…

In this tutorial, we will learn about digital input and output by exploring how to integrate GPIO nodes into our flow within Node-RED on our IRIV PiControl setup.

⦿ Learn more about IRIV PiControl: https://my.cytron.io/p-iriv-picontrol-cm4-industrial-controller…

Node-RED is a visual programming tool that allows users to wire together hardware devices, APIs, and online services to create IoT applications and data flows. It offers a browser-based interface with a wide range of pre-built nodes for easy integration and…

Welcome back to the IRIV PiControl tutorial series, in this part, we'll explore how to remote control your IRIV PiControl using VNC Viewer. We'll walk you through two distinct methods: the Standard setup, involving direct interaction, and the Headless Setup…

Welcome to the IRIV PiControl tutorial, where we'll guide you through essential steps for accessing the Raspberry Pi terminal. In this tutorial, we'll cover two methods: accessing the console via SSH and utilizing the serial port. Additionally, we'll show…

Learn how to flash a new operating system into the IRIV PiControl. This concise guide will take you through the essential steps, ensuring a quick and successful process.

⦿ To learn more about IRIV PiControl visit: https://my.cytron.io/p-iriv-picontrol-cm4…

Get started with IRIV PiControl – This concise guide covers powering up, connecting to the demo network, and navigating the monitoring dashboard.

⦿ To learn more about IRIV PiControl visit: https://my.cytron.io/p-iriv-picontrol-cm4-industrial-controller…

Hi and welcome back to another tutorial on using IRIV PiControl and Node-RED. In this tutorial, we'll learn how to upload sensor data on MySQL database.

🎥 Node-RED Modbus-RTU - Temperature and Humidity Sensor: https://youtu.be/HqPkznT86yQ?si=fYyrOFlFuHLac92y…

To allow 2x Bluetooth modules to communicate with each other, we need to set the module to master and slave modes. In this tutorial I will show how to do the setup using CircuitPython. 😄

Tutorial:
https://tutorial.cytron.io/2022/05/31/bluetooth-hc-05-master…

I plan to add a light source to my video or live and this light can change colors. Part 2, I focused on the wiring part, IoT platform (Adafruit IO) and CircuitPython coding. 😄

Tutorial:
https://tutorial.cytron.io/2022/04/26/wifi-neopixel-rgb-led-using-circuitpython/…

This tutorial I would like to share how to interface the color sensor TCS3200 using CircuitPython on Raspberry Pi Pico. 😄

Tutorial:
https://tutorial.cytron.io/2022/04/20/color-rgb-detector-using-circuitpython-on-raspberry-pi-pico/

👨🏻‍💻👩🏻‍💻
Join our Telegram…

In this video I would like to share about a bidirectional visitor counter project that is programmed using CircuitPython on Maker Nano RP2040. 😄

Tutorial:
https://tutorial.cytron.io/2022/04/12/bidirectional-visitor-counter-using-circuitpython-on-maker-nano…

After assemble the Otto robot, next we will try to program it using CircuitPython. Basically we need to know how to control 4 servo motors to create the robot movement. 😄

Tutorial:
https://tutorial.cytron.io/2022/03/29/program-otto-diy-robot-for-basic-movements…

I would like to try building the Otto DIY robot using Maker Nano RP2040 and program it using CircuitPython. But the STL file provided cannot fit the board. So how? 😅

Tutorial:
https://tutorial.cytron.io/2022/03/22/otto-diy-robot-head-for-maker-nano-rp2040/…

In this tutorial I will share how to build a "talking photo" project using Maker Pi Pico and CircuitPython. 🤔😄

Tutorial:
https://tutorial.cytron.io/2022/03/08/talking-photo-program-using-circuitpython-on-maker-pi-pico/

👨🏻‍💻👩🏻‍💻
Join our Telegram
Trust Me…

Before this I have built a Hungry Robot using REKA:BIT. This time I want to try Maker Pi RP2040 and program it using CircuitPython.

Tutorial:
https://tutorial.cytron.io/2022/02/22/hungry-robot-powered-by-maker-pi-rp2040-and-circuitpython/

👨🏻‍💻👩🏻‍💻
Join…

Join Telegram Trust Me I'm A Maker 👨🏻‍💻👩🏻‍💻 https://t.iss.one/trustmeimamaker

In this tutorial I will share how to control a DC motor using Maker Drive and program it using CircuitPython on the Maker Nano RP2040.

Tutorial:
https://tutorial.cytron.io/2022/02/15/control…

Join Telegram Trust Me I'm A Maker 👨🏻‍💻👩🏻‍💻 https://t.iss.one/trustmeimamaker

This tutorial I use the same hardware setup as the internet clock tutorial. Just, this time I want to display a Telegram message on the dot matrix. 😄

Tutorial:
https://tutorial.cy…

Join Telegram Trust Me I'm A Maker 👨🏻‍💻👩🏻‍💻 https://t.iss.one/trustmeimamaker

Getting enough water every day is important for our health. But sometimes we are too busy and forget about it. This tutorial will share how to build a simple yet interesting device…