Msi gaming laptop not working
/r/MSI_Gaming/comments/1uwxmzs/msi_gaming_laptop_not_working/
https://redd.it/1uxim01
@MSILaptops
/r/MSI_Gaming/comments/1uwxmzs/msi_gaming_laptop_not_working/
https://redd.it/1uxim01
@MSILaptops
Reddit
From the MSILaptops community on Reddit: Msi gaming laptop not working
Posted by WolverineAcceptable6 - 1 vote and 1 comment
Ram Upgrade Help
Hi. I just got my MSI vector 16 hx ai today. And I need to upgrade from 2x8 GB OF RAM, TO 2x16GB ram. I've been finding conflicting information about if 5600 is enough and what CL number it needs. So I was wondering if this would work? Any help is appreciated 😅😭
https://a.co/d/08uTfiL9
https://redd.it/1uxs0je
@MSILaptops
Hi. I just got my MSI vector 16 hx ai today. And I need to upgrade from 2x8 GB OF RAM, TO 2x16GB ram. I've been finding conflicting information about if 5600 is enough and what CL number it needs. So I was wondering if this would work? Any help is appreciated 😅😭
https://a.co/d/08uTfiL9
https://redd.it/1uxs0je
@MSILaptops
Reddit
From the MSILaptops community on Reddit
Explore this post and more from the MSILaptops community
MSI Bravo 15 fans maxing
MSI Bravo 15 C7VE - Fans suddenly max out, FPS drops from \~100 to 20–30, temps are normal, only reboot fixes it
I’ve been troubleshooting this for a while and I’m running out of ideas.
Laptop:
MSI Bravo 15 C7VE
RTX 4050 Laptop GPU
Ryzen 7 (C7VE model)
The problem
The laptop starts out completely normal.
I can launch a game and performance is perfect at first.
Then, after playing for a while (used to happen after about one match, the fans instantly ramp to over 6000 RPM and my FPS immediately drops from around 80 FPS to 20–30 FPS.
The FPS drop is instant, not gradual.
Once it happens:
Performance never recovers.
Fans stay at maximum speed.
The only thing that fixes it is rebooting the laptop.
Temperatures
The weird part is the temperatures are completely normal.
I’ve monitored everything with HWiNFO and MSI Center.
Typical temperatures after the issue occurs:
CPU: \~40–50°C
GPU: \~35–50°C
GPU Hotspot: high 80°C
Memory Junction: \~48°C
HWiNFO also reports:
No CPU thermal throttling
No PROCHOT
No obvious overheating
So the laptop behaves like it’s overheating even though the temperatures are nowhere near high enough.
Things I’ve already tried
Updated BIOS from E158NAMS.113 to E158NAMS.115
EC reset (power off, unplugged, held power button for 60 seconds)
Completely uninstalled MSI Center
Windows reset
Clean installation of the latest NVIDIA driver
Tested multiple games (The Finals and Planet Zoo)
Monitored temperatures with HWiNFO
Verified there is no CPU thermal throttling
Verified CPU/GPU temperatures remain normal
Tested with both my replacement 200W MSI charger and the original 200W MSI charger (same behavior)
https://redd.it/1uxro8t
@MSILaptops
MSI Bravo 15 C7VE - Fans suddenly max out, FPS drops from \~100 to 20–30, temps are normal, only reboot fixes it
I’ve been troubleshooting this for a while and I’m running out of ideas.
Laptop:
MSI Bravo 15 C7VE
RTX 4050 Laptop GPU
Ryzen 7 (C7VE model)
The problem
The laptop starts out completely normal.
I can launch a game and performance is perfect at first.
Then, after playing for a while (used to happen after about one match, the fans instantly ramp to over 6000 RPM and my FPS immediately drops from around 80 FPS to 20–30 FPS.
The FPS drop is instant, not gradual.
Once it happens:
Performance never recovers.
Fans stay at maximum speed.
The only thing that fixes it is rebooting the laptop.
Temperatures
The weird part is the temperatures are completely normal.
I’ve monitored everything with HWiNFO and MSI Center.
Typical temperatures after the issue occurs:
CPU: \~40–50°C
GPU: \~35–50°C
GPU Hotspot: high 80°C
Memory Junction: \~48°C
HWiNFO also reports:
No CPU thermal throttling
No PROCHOT
No obvious overheating
So the laptop behaves like it’s overheating even though the temperatures are nowhere near high enough.
Things I’ve already tried
Updated BIOS from E158NAMS.113 to E158NAMS.115
EC reset (power off, unplugged, held power button for 60 seconds)
Completely uninstalled MSI Center
Windows reset
Clean installation of the latest NVIDIA driver
Tested multiple games (The Finals and Planet Zoo)
Monitored temperatures with HWiNFO
Verified there is no CPU thermal throttling
Verified CPU/GPU temperatures remain normal
Tested with both my replacement 200W MSI charger and the original 200W MSI charger (same behavior)
https://redd.it/1uxro8t
@MSILaptops
Reddit
From the MSILaptops community on Reddit
Explore this post and more from the MSILaptops community
msi raider ge75 10sf screen
i have a msi raider ge75 10sf that i got from a friend and the left hinge broke off and theres an exposed white wire the screen wont show any sings of life but when i use a hdmi cable to my moniter it works whats wrong?
https://redd.it/1uxvhyc
@MSILaptops
i have a msi raider ge75 10sf that i got from a friend and the left hinge broke off and theres an exposed white wire the screen wont show any sings of life but when i use a hdmi cable to my moniter it works whats wrong?
https://redd.it/1uxvhyc
@MSILaptops
Reddit
From the MSILaptops community on Reddit
Explore this post and more from the MSILaptops community
MSI Cyborg 15 A12VE - Random black screen/restart after FurMark/GCS test, Intel UHD instability after motherboard replacement
Hi everyone,
I'm hoping someone can help because I've spent the last couple of days troubleshooting this with an MSI technician.
Laptop:
MSI Cyborg 15 A12VE
Intel Core i7-12650H
NVIDIA RTX 4050 Laptop GPU
Windows 11
Background
My laptop originally had an RTX 4050 issue, so MSI replaced the entire motherboard.
After the motherboard replacement:
The internal laptop speakers have never worked again (headphones work fine).
I'm getting graphics-related instability.
Current issue
The GCS diagnostic runs FurMark.
The FurMark stress test itself completes successfully:
RTX 4050 reaches \~95 FPS on charger.
GPU temperature stays around 70°C.
No artifacts or graphical corruption.
However, immediately after FurMark finishes:
Sometimes GCS throws Run-time error 55: "File already open".
Then the screen goes black.
The laptop restarts by itself (no BSOD).
Intel UHD Graphics behavior
This is the weird part.
If I disable Intel UHD Graphics in Device Manager:
Windows becomes much more stable.
Random restarts mostly stop.
If I enable Intel UHD Graphics:
Windows starts randomly restarting again.
Sometimes it restarts within a few minutes.
I also tried uninstalling the Intel graphics driver completely so Windows used the Microsoft Basic Display Adapter, but the laptop still restarted after several minutes.
Things I've already tried
Windows Update (fully updated)
SFC /scannow
DISM /RestoreHealth
BIOS reset to defaults
Official MSI Intel graphics driver
Official MSI chipset driver
NVIDIA driver reinstall
Wi-Fi driver reinstall
FurMark/GCS multiple times
Nothing fixed the issue.
Additional information
RTX 4050 is detected correctly in Device Manager.
FurMark completes successfully before the reboot.
DirectX 12 is installed.
Device Manager shows Intel UHD disabled (Code 22) only because I manually disabled it.
MSI technician has now escalated the case to MSI engineering.
My questions
Has anyone seen FurMark complete successfully but the system reboot immediately afterward?
Could this still be an Intel UHD / Optimus / hybrid graphics issue?
Could the replacement motherboard or BIOS/EC firmware be the cause?
Does the speaker issue after the motherboard replacement make anyone suspect the replacement motherboard itself?
Any ideas would be greatly appreciated. Thanks!
https://redd.it/1uy27jm
@MSILaptops
Hi everyone,
I'm hoping someone can help because I've spent the last couple of days troubleshooting this with an MSI technician.
Laptop:
MSI Cyborg 15 A12VE
Intel Core i7-12650H
NVIDIA RTX 4050 Laptop GPU
Windows 11
Background
My laptop originally had an RTX 4050 issue, so MSI replaced the entire motherboard.
After the motherboard replacement:
The internal laptop speakers have never worked again (headphones work fine).
I'm getting graphics-related instability.
Current issue
The GCS diagnostic runs FurMark.
The FurMark stress test itself completes successfully:
RTX 4050 reaches \~95 FPS on charger.
GPU temperature stays around 70°C.
No artifacts or graphical corruption.
However, immediately after FurMark finishes:
Sometimes GCS throws Run-time error 55: "File already open".
Then the screen goes black.
The laptop restarts by itself (no BSOD).
Intel UHD Graphics behavior
This is the weird part.
If I disable Intel UHD Graphics in Device Manager:
Windows becomes much more stable.
Random restarts mostly stop.
If I enable Intel UHD Graphics:
Windows starts randomly restarting again.
Sometimes it restarts within a few minutes.
I also tried uninstalling the Intel graphics driver completely so Windows used the Microsoft Basic Display Adapter, but the laptop still restarted after several minutes.
Things I've already tried
Windows Update (fully updated)
SFC /scannow
DISM /RestoreHealth
BIOS reset to defaults
Official MSI Intel graphics driver
Official MSI chipset driver
NVIDIA driver reinstall
Wi-Fi driver reinstall
FurMark/GCS multiple times
Nothing fixed the issue.
Additional information
RTX 4050 is detected correctly in Device Manager.
FurMark completes successfully before the reboot.
DirectX 12 is installed.
Device Manager shows Intel UHD disabled (Code 22) only because I manually disabled it.
MSI technician has now escalated the case to MSI engineering.
My questions
Has anyone seen FurMark complete successfully but the system reboot immediately afterward?
Could this still be an Intel UHD / Optimus / hybrid graphics issue?
Could the replacement motherboard or BIOS/EC firmware be the cause?
Does the speaker issue after the motherboard replacement make anyone suspect the replacement motherboard itself?
Any ideas would be greatly appreciated. Thanks!
https://redd.it/1uy27jm
@MSILaptops
How to fix this rounded screw?
Hi when i removed the heatsink to apply thermal paste i got this screw rounded by mistake. How do i fix this because i cant remove the screw now?
https://ibb.co/Wv478gGZ
https://redd.it/1uy0cyv
@MSILaptops
Hi when i removed the heatsink to apply thermal paste i got this screw rounded by mistake. How do i fix this because i cant remove the screw now?
https://ibb.co/Wv478gGZ
https://redd.it/1uy0cyv
@MSILaptops
ImgBB
Skärmbild 2026 07 16 133712 hosted at ImgBB
Image Skärmbild 2026 07 16 133712 hosted on ImgBB
Question regarding MSI GF63 12VF Type-C port (USB3.2 Gen1 / DisplayPort™) 144hz
https://redd.it/1uy30mp
@MSILaptops
https://redd.it/1uy30mp
@MSILaptops
MSI GS66 RTX 3080 performance issue? League FPS similar to my old GTX 1060 laptop
/r/MSI_Gaming/comments/1uykf1d/msi_gs66_rtx_3080_performance_issue_league_fps/
https://redd.it/1uyko3i
@MSILaptops
/r/MSI_Gaming/comments/1uykf1d/msi_gs66_rtx_3080_performance_issue_league_fps/
https://redd.it/1uyko3i
@MSILaptops
Reddit
From the MSILaptops community on Reddit: MSI GS66 RTX 3080 performance issue? League FPS similar to my old GTX 1060 laptop
Posted by liv3_onc3 - 1 vote and 0 comments
MSI Stealth Power Limits
My MSI Stealth A1VHG has a 4080 that’s rated at 60W + 45W dynamic boost. However, when on the extreme performance profile, the laptop only hits about 56-60W consistently and I never see it reaching up to that 105W (temps are at around 82-84). Is this normal for dynamic boost? Shouldn’t it be going above 60 as well?
https://redd.it/1uylbw1
@MSILaptops
My MSI Stealth A1VHG has a 4080 that’s rated at 60W + 45W dynamic boost. However, when on the extreme performance profile, the laptop only hits about 56-60W consistently and I never see it reaching up to that 105W (temps are at around 82-84). Is this normal for dynamic boost? Shouldn’t it be going above 60 as well?
https://redd.it/1uylbw1
@MSILaptops
Reddit
From the MSILaptops community on Reddit
Explore this post and more from the MSILaptops community
MSI Vector A16 HX (E15MMAMS.10B) - 0.55 GHz bug still happening? PBO/PPT limits not working?
/r/MSILaptops/comments/1uyke53/msi_vector_a16_hx_e15mmams10b_055_ghz_bug_still/
https://redd.it/1uykeik
@MSILaptops
/r/MSILaptops/comments/1uyke53/msi_vector_a16_hx_e15mmams10b_055_ghz_bug_still/
https://redd.it/1uykeik
@MSILaptops
Reddit
From the MSILaptops community on Reddit: MSI Vector A16 HX (E15MMAMS.10B) - 0.55 GHz bug still happening? PBO/PPT limits not working?
Posted by Consistent_Gap4479 - 1 vote and 0 comments
MSI Vector A16 HX (E15MMAMS.10B) - 0.55 GHz bug still happening? PBO/PPT limits not working?
Hi everyone,
I recently bought an MSI Vector A16 HX with the Ryzen 9 8940HX, and I'm experiencing the same 0.55 GHz CPU bug that some people have mentioned. It only happens when running on battery power.
I'm already on the latest BIOS (E15MMAMS.10B), but the issue is still there.
Is anyone else still experiencing this bug with the latest BIOS?
Also, I've been trying to tune the CPU from the BIOS (Advanced → AMD Overclocking → Precision Boost Overdrive), but changing PPT/TDC/EDC/Curve Optimizer doesn't seem to have any effect. The CPU still draws about the same power regardless of the values I set.
How are you guys limiting CPU power? Are you using BIOS settings, UXTU, RyzenAdj, or another tool?
In CPU-Z, my BIOS version is still reported as E15MMAMS.10B, but the BIOS date shows 05/14/2026, while MSI's support page lists the same BIOS version with a release date of 07/07/2026.
Is this normal? Do you guys see the same BIOS date in CPU-Z, or is mine different?
https://preview.redd.it/jg2gzm0vpodh1.png?width=589&format=png&auto=webp&s=dea3793fb0f160f0e44e83bcfa3b61c538e7a35a
Thanks!
https://redd.it/1uyke53
@MSILaptops
Hi everyone,
I recently bought an MSI Vector A16 HX with the Ryzen 9 8940HX, and I'm experiencing the same 0.55 GHz CPU bug that some people have mentioned. It only happens when running on battery power.
I'm already on the latest BIOS (E15MMAMS.10B), but the issue is still there.
Is anyone else still experiencing this bug with the latest BIOS?
Also, I've been trying to tune the CPU from the BIOS (Advanced → AMD Overclocking → Precision Boost Overdrive), but changing PPT/TDC/EDC/Curve Optimizer doesn't seem to have any effect. The CPU still draws about the same power regardless of the values I set.
How are you guys limiting CPU power? Are you using BIOS settings, UXTU, RyzenAdj, or another tool?
In CPU-Z, my BIOS version is still reported as E15MMAMS.10B, but the BIOS date shows 05/14/2026, while MSI's support page lists the same BIOS version with a release date of 07/07/2026.
Is this normal? Do you guys see the same BIOS date in CPU-Z, or is mine different?
https://preview.redd.it/jg2gzm0vpodh1.png?width=589&format=png&auto=webp&s=dea3793fb0f160f0e44e83bcfa3b61c538e7a35a
Thanks!
https://redd.it/1uyke53
@MSILaptops
Just bought a Msi cyborg 15 rtx 5070 8gb 16gb ram i7 13620h 1tb ssd for 1k but considering giving it back
/r/GamingLaptops/comments/1uyw24i/just_bought_a_msi_cyborg_15_rtx_5070_8gb_16gb_ram/
https://redd.it/1uyw2hi
@MSILaptops
/r/GamingLaptops/comments/1uyw24i/just_bought_a_msi_cyborg_15_rtx_5070_8gb_16gb_ram/
https://redd.it/1uyw2hi
@MSILaptops
Reddit
From the MSILaptops community on Reddit: Just bought a Msi cyborg 15 rtx 5070 8gb 16gb ram i7 13620h 1tb ssd for 1k but considering…
Posted by dobeba2001 - 1 vote and 0 comments
Links to real ptm 7950 honeywell??
I really need a link, because so many are fake, if you could provide a EU link, id like that, cause im sick and tired of gambling if i got the right ptm or whatever!
Ideally a 60x60mm sheet or 80x40, thanks already gents, and have a wonderful day!
(A equivalent is also good)
https://redd.it/1uz5lnn
@MSILaptops
I really need a link, because so many are fake, if you could provide a EU link, id like that, cause im sick and tired of gambling if i got the right ptm or whatever!
Ideally a 60x60mm sheet or 80x40, thanks already gents, and have a wonderful day!
(A equivalent is also good)
https://redd.it/1uz5lnn
@MSILaptops
Reddit
From the MSILaptops community on Reddit
Explore this post and more from the MSILaptops community
thermal paste recommendation
please recommend me one or a brand or something specific i should purchase before doing this and do i need to remove the heat sink? because thats going to be pain in the a$$. i have a msi gp66 lepoard
https://redd.it/1uz801w
@MSILaptops
please recommend me one or a brand or something specific i should purchase before doing this and do i need to remove the heat sink? because thats going to be pain in the a$$. i have a msi gp66 lepoard
https://redd.it/1uz801w
@MSILaptops
Reddit
From the MSILaptops community on Reddit
Explore this post and more from the MSILaptops community
Help
I am trying to unscrw the screws that hold my heatsink for my msi thin 15 but the screws dont turn. Is there anything i can do?
https://redd.it/1uza53p
@MSILaptops
I am trying to unscrw the screws that hold my heatsink for my msi thin 15 but the screws dont turn. Is there anything i can do?
https://redd.it/1uza53p
@MSILaptops
Reddit
From the MSILaptops community on Reddit
Explore this post and more from the MSILaptops community
MSI Stealth Unresponsive
Kind of at a loss here. Laptop randomly started having the screen go black and stop responding. Now only shows power LED but nothing happens. Let it sit and eventually (not sure how long but a while) a secure boot violation shows up, everything I’ve found says to disable secure boot, go in the bios, etc. I can’t disable it (entirely grayed out), I can’t access the bios until the secure boot violation comes up, no MSI logo shows up when I turn it on, no keyboard lighting either. I have not found anything that seems helpful to fix it. (I assume the secure boot violation is the cause but I could be wrong) I believe it is a Stealth 17 Studio A13V, I use this laptop for school so I’d like to not have to send it in for repairs. Thank you!
https://redd.it/1uzbtzn
@MSILaptops
Kind of at a loss here. Laptop randomly started having the screen go black and stop responding. Now only shows power LED but nothing happens. Let it sit and eventually (not sure how long but a while) a secure boot violation shows up, everything I’ve found says to disable secure boot, go in the bios, etc. I can’t disable it (entirely grayed out), I can’t access the bios until the secure boot violation comes up, no MSI logo shows up when I turn it on, no keyboard lighting either. I have not found anything that seems helpful to fix it. (I assume the secure boot violation is the cause but I could be wrong) I believe it is a Stealth 17 Studio A13V, I use this laptop for school so I’d like to not have to send it in for repairs. Thank you!
https://redd.it/1uzbtzn
@MSILaptops
Reddit
From the MSILaptops community on Reddit
Explore this post and more from the MSILaptops community