FYI: YUMA
Total votes: 70,594
Election Day: 9,485
Early Votes: 59,895
—> of which 53,779 were mail-ins
Provisional: 1,214

https://t.iss.one/behizy/3311

"Mail-ins" = "Fraud". Period.

Reference: FYI: YUMA by Captain K.

———
My shortest post yet 😉

KN for @ElectionFraud20_org

Williamson County, Tennessee - EAC Report - Part 1

The report is for the municipal election held on October 26, 2021 and can be found on the EAC website here.

Doug Logan does an excellent job of reviewing this report in this video.

There are striking parallels between this report, Halderman's Antrim County report and what happened in Dekalb County, GA.

Here are quotes from the official EAC report followed by our comments:

> Close poll reports from 7 of the 18 ICP tabulators used during the election did not match the number of ballots scanned

The same thing happened in Dekalb County.

How is it possible that the problem only occurs on some tabulators and not all of them?

Why weren't ALL the tabulators updated with the latest configuration files? This is starting to become a trend, almost as if it is intentional... And it is starting to make a lot of sense:

- Mixing good tabulators with bad tabulators makes discovering the error (cough... manipulation) harder

- Before each election cycle a few more tabulators can be "fixed" to gradually change the voting patterns within a county so no one notices.

- Most importantly, they can always blame "human error" and provide a "possible deniable" explanation.

> The central count tabulation was confirmed via hand count of the paper ballot records

If we keep falling back on hand counting to double check the tabulators, why are we using the tabulators at all?

They keep tacitly confirming that hand counting is the most reliable counting method.

> It was discovered that the system was installed with outdated versions of two configuration files when the system was upgraded from D-Suite 5.5 to D-Suite 5.5-B in January of 2021

The version of the configuration files seems to be a major problem in Antrim and Dekalb as well.

⚠️The ballot paper should clearly display (and encode) the version of the configuration files. The tabulator would then check the version on the ballot matches its own internal version before analyzing the ballot image.

The CVR files should also contain the configuration version used by the tabulator, so that when the data is uploaded to the EMS, a check can be made to ensure the version of the configuration files used in the tabulator match the version used in the EMS. (This would have completely prevented the Antrim County miscount).

This is really basic "checks" that are trivial to implement. The fact that Dominion does not perform these checks borders on professional negligence (to put it mildly).

It's pretty obvious why these checks are not performed. We will let you guess why.

> This election definition was imported into the D-Suite 5.5-B system from a definition originally created on the D-Suite 5.5 system.

Think about this for second in terms of timeline. The county is right in the middle of preparing for an election.

Do you really think it makes sense that a county would upgrade their election software when they are right in the middle of preparing for an election?

Regardless, why doesn't Dominion make election definition files produced by an older version of the software incompatible with a newer version, if that is truly the case? Again, that would be trivial to implement.

> Results showed that the anomaly was recreated on each of
the ICP scanners.

This clearly indicates some tabulators were updated with the new configuration files and others were NOT. Why?

How is it possible to miss some tabulators? (i.e. 11 were missed out of 18).

You only have ONE job to do... and you still can't get it right? ... Or is it intentional?

> indicating a QR code misread occurred.

Doug goes into this in great detail in his video. You can't misread a QR code. Either you can read it in full or you can not read it at all. There is no middle ground.

(Cont'd in part 2)

Williamson County, Tennessee - EAC Report - Part 2

(This is a continuation from Part 1)

> A final test was performed using an election definition recreated entirely on the D-Suite 5.5-B system with identical parameters to the definition used during the election and for prior testing. The anomaly was not observed during this test, and there were no instances of the
security error “QR code signature mismatch” or warning message “Ballot format or id is unrecognizable” in the audit log.

The exact same parameters were used to re-create the configuration files with the new version of the software, and this time the tabulators worked fine. (Keep this in mind for what follows).

> The direct cause of the anomaly was inconclusive

⚠️ Really?!? This does NOT inspire us with a lot of confidence...

They are not really sure how this problem occurred, but please don't worry because Dominion did a Root Cause Analysis (RCA) and identified and fixed the problem in their code. (Yay! 🎉🎉 nothing to see here. Move along...).

NOTE: Doug goes into great depth in his video concerning the code, so we won't repeat it here.

Our take is that none of this makes sense. QR codes can NOT be misread for starters. When the configuration files were generated with D-Suite 5.5-B, the tabulators worked perfectly so there wasn't a problem in the code to start with.

The problem is obviously in how the configuration files are "crafted".

It means the configuration files can be crafted in such a way that a ballot can enable or disable certain code options, which will change the behavior of the tabulator.

🚨 The point we are trying to make here, is that you don't need to "hack into" anything. (😱)

Having the right configuration files, which are then triggered by the right ballot can change the behavior of the tabulator. This is all built into the code and no "hacking" is required.

In fact, "Special" ballots are indeed used to signal to the tabulator a new batch of ballots is about to be processed....

Now that we know this is a "feature" built into the tabulators, many different scenarios are possible.

We will leave that to your imagination.

# References:

- Part 1
- Doug Logan's video review
- Doug Logan's interview with CannCon

———

KN for @ElectionFraud20_org

https://skeshel.substack.com/p/the-fall-of-sioux-falls-how-red-states

Just six contested states? Think again.

Inside the plan to hollow out core freedom states, highlighting the Keshel Method in Minnehaha County.

Thanks for reading!

Texas GOP Passes Resolution Declaring Biden ‘Not Legitimately Elected’
#GodBlessTexas

https://www.theepochtimes.com/mkt_app/texas-gop-passes-resolution-declaring-biden-not-legitimately-elected_4543841.html

Does this resolution have the necessary weight behind it to start shifting things? Let us know your thoughts in the comments.

I show you 10,000 imaginary Biden votes in Minnehaha County, SD (Sioux Falls).

A complement to this SubStack piece from yesterday:
https://skeshel.substack.com/p/the-fall-of-sioux-falls-how-red-states

🚨(PART 1) 2000 MULES NGO'S EXPOSED- UnidosUS!

It’s time to go on OFFENSE, and expose the NGO’s! 🇺🇸👊🏻

UnidosUS is first! More coming
https://rumble.com/v195f2x-part-1-2000-mules-ngos-exposed-unidosus.html

No thanks. I will take this unopened junk mail to the poll to ensure someone has not voted for me.

Email the GA GOP and demand we follow suit to Texas in addition to supporting our Candidates on both sides who are contesting their races with no response!!! ❤️🤍💙

https://skeshel.substack.com/p/the-oregon-motor-voter-act-stopped

I am opening this article to all subscribers.

Please review the consequences of automatic voter registration on our elections, highlighted by the massive increase in new voters in Oregon, which has all the makings of an upset Trump state. Alaska is on the path to become the next Oregon.

Regarding California: Hart InterCivic is in 12 counties, with 3.66 Million registered voters and 585K are inactive. ES&S is in 5 counties, with 196.7K registered voters and 32.9K are inactive. Dominion is in 40 counties, with 15.18 million registered voters and 2.24 Million are inactive. Los Angeles County is unique, with its own system for 7.1 million registered voters and 1.49 million inactive (Smartmatic is the SYSTEM platform used in Los Angeles County). California has 58 counties, 26.157 million registered voters and 4.348 million of them inactive, with 270K doing Same Day Registration (SDR), and had 20,360 of the 30,760 Ballot Marking Device used in California. Across the state, there were 14,5 million By-Mail (Absentee) ballots, therefore 1.124 million voted on Election Day, and 996K as Early Voting (both In-Person), lastly 93,452 as UOCAVA Absentee. Turnout in the 2020 General Election was 17.7 million at 81.26%.

Trump’s track record on endorsed candidates is impeccable thus far in the primaries.

Except in Georgia, where candidates Brad Raffensperger and Brian Kemp out performed their polling data by over 13% and Vernon Jones had a 4 point lead over Collins in polling but somehow loses the run off 76-24.

They’re not even hiding it in Georgia.

CISA recently acknowledged severe vulnerabilities in the voting machines specifically used in Georgia.

(https://www.cisa.gov/uscert/ics/advisories/icsa-22-154-01)

This advisory, the same org that touted “safest election ever” and was echoed far and wide by the MSM, has gone relatively silent in the new since its release 3 weeks ago.

Part of the “mitigation” to make sure these vulnerabilities weren’t exploited was rigorous post election audits.

Georgia refuses to do any. The only hand count they did do found massive vote flips and put the third place candidate in first in Dekalb’s District 2.

Nothing to see here. Just the destruction of America through “free and fair” elections.